CFD modelling of the fast pyrolysis of biomass in fluidised bed reactors: modelling the impact of biomass shrinkage.

The fluid–particle interaction and the impact of shrinkage on pyrolysis of biomass inside a 150 g/h fluidised bed reactor is modelled. Two 500 View the MathML sourcem in diameter biomass particles are injected into the fluidised bed with different shrinkage conditions. The two different conditions consist of (1) shrinkage equal to the volume left by the solid devolatilization, and (2) shrinkage parameters equal to approximately half of particle volume. The effect of shrinkage is analysed in terms of heat and momentum transfer as well as product yields, pyrolysis time and particle size considering spherical geometries. The Eulerian approach is used to model the bubbling behaviour of the sand, which is treated as a continuum. Heat transfer from the bubbling bed to the discrete biomass particle, as well as biomass reaction kinetics are modelled according to the literature. The particle motion inside the reactor is computed using drag laws, dependent on the local volume fraction of each phase. FLUENT 6.2 has been used as the modelling framework of the simulations with the whole pyrolysis model incorporated in the form of user defined function (UDF).

[1]  D. Gidaspow.  Multiphase Flow and Fluidization: Continuum and Kinetic Theory Descriptions , 1994 .

[2]  A. Bridgwater,et al.  CFD modelling of the fast pyrolysis of an in-flight cellulosic particle subjected to convective heat transfer , 2009 .

[3]  D. Geldart.  Types of gas fluidization , 1973 .

[4]  Nikolay Ivanov Kolev.  Multiphase Flow Dynamics 2: Thermal and Mechanical Interactions , 2005 .

[5]  F. Berruti,et al.  A KINETIC MODEL FOR THE PRODUCTION OF LIQUIDS FROM THE FLASH PYROLYSIS OF BIOMASS , 1988 .

[6]  A. Bridgwater,et al.  CFD modelling of the fast pyrolysis of biomass in fluidised bed reactors, Part A: Eulerian computation of momentum transport in bubbling fluidised beds , 2008 .

[7]  M. Sommerfeld,et al.  Multiphase Flows with Droplets and Particles , 2011 .

[8]  C.R.E. de Oliveira,et al.  A numerical investigation of bubbling gas–solid fluidized bed dynamics in 2-D geometries , 2002 .

[9]  Achim Schmidt,et al.  Numerical prediction of heat transfer in fluidized beds by a kinetic theory of granular flows , 2000 .

[10]  Nikolay Ivanov Kolev.  Multiphase Flow Dynamics 1 , 2002 .

[11]  U. Renz,et al.  Eulerian computation of heat transfer in fluidized beds , 1999 .

[12]  Robert F. Chaiken,et al.  Charring pyrolysis of wood in fires by laser simulation , 1977 .

[13]  Colomba Di Blasi,et al.  Comparison of semi-global mechanisms for primary pyrolysis of lignocellulosic fuels , 1998 .

[14]  K. Mahesh,et al.  A Eulerlan-Lagrangian Model to Simulate Two-Phase/Particulate Flows , 2003 .

[15]  M. S. Parmar,et al.  The heat transfer coefficient for a freely moving sphere in a bubbling fluidised bed , 2002 .

[16]  Ulrich Renz,et al.  Eulerian simulation of bubble formation at a jet in a two-dimensional fluidized bed , 1997 .

[17]  Jam Hans Kuipers,et al.  Modelling of large-scale dense gas-solid bubbling fluidised beds using a novel discrete bubble model , 2006 .

[18]  B. Krieger-Brockett,et al.  Single-particle biomass pyrolysis: correlations of reaction products with process conditions , 1988 .

[19]  J. Lédé,et al.  A new model for thermal volatilization of solid particles undergoing fast pyrolysis , 1983 .

[20]  A. Chaurasia,et al.  Most sensitive parameters in pyrolysis of shrinking biomass particle , 2007 .

[21]  W. Ranz.  Evaporation from drops : Part II , 1952 .

[22]  Stuart A. Scott,et al.  The heat transfer coefficient between a particle and a bed (packed or fluidised) of much larger particles , 2004 .

[23]  N. Papayannakos,et al.  Modelling of the pyrolysis of biomass particles. Studies on kinetics, thermal and heat transfer effects , 1991 .

[24]  Pradeep K. Agarwal,et al.  TRANSPORT PHENOMENA IN MULTI-PARTICLE SYSTEMS. IV, HEAT TRANSFER TO A LARGE FREELY MOVING PARTICLE IN GAS FLUIDIZED BED OF SMALLER PARTICLES , 1991 .

[25]  Colomba Di Blasi,et al.  Heat, momentum and mass transport through a shrinking biomass particle exposed to thermal radiation , 1996 .

[26]  O. Levenspiel,et al.  Fluidization engineering, 2nd edition , 1991 .

[27]  Mamoru Ishii,et al.  Local drag laws in dispersed two-phase flow , 1979 .

[28]  Sai Gu,et al.  CFD modelling of the fast pyrolysis of biomass in fluidised bed reactors. Part B: Heat, momentum and mass transport in bubbling fluidised beds , 2009 .

[29]  M. Adams,et al.  Discrete particle-continuum fluid modelling of gas–solid fluidised beds , 2002 .

[30]  L. Schiller.  Uber die Grundlegenden Berechnungen bei der Schwerkraftaufbereitung , 1933 .

[31]  Colomba Di Blasi,et al.  Analysis of Convection and Secondary Reaction Effects Within Porous Solid Fuels Undergoing Pyrolysis , 1993 .

[32]  W. E. Ranz,et al.  Evaporation from drops , 1952 .

[33]  B. Babu,et al.  Heat transfer and kinetics in the pyrolysis of shrinking biomass particle , 2004 .

[34]  Anthony V. Bridgwater,et al.  Principles and practice of biomass fast pyrolysis processes for liquids , 1999 .

[35]  J. Baeyens,et al.  Fluid-bed heat transfer : By J. S. M. BOTTERILL, Academic Press, London, 1975; pp. xvi + 299; illustrated; £9.00 net. , 1976 .

[36]  B. B. Krieger,et al.  Modelling and experimental verification of physical and chemical processes during pyrolysis of a large biomass particle , 1985 .

[37]  J. Kuipers,et al.  Numerical calculation of wall‐to‐bed heat‐transfer coefficients in gas‐fluidized beds , 1992 .