Characterization and hazard evaluation of bottom ash produced from incinerated hospital waste.

The uncontrolled disposal of bottom ash from incineration units of hazardous and infected wastes in many countries causes significant scale damage, since it contaminates the soil as well as surface and underground waters, putting both the environment and the public health at risk. In view of the above, a study of bottom ash produced at a hospital medical waste incinerator (HMWI) in Greece was conducted, in order to detect the presence of heavy metals and therefore assess its toxicity; this led to conclusions on the possible contamination of the soil as well as surface and underground waters as a result of its disposal in landfills. The study was conducted at a typical general hospital with 500-bed capacity. About 880 kg of infectious waste coming from a general hospital with all medical departments are pyrolyticly incinerated at the HMWI every day. International literature contains many references to research that characterizes bottom ash as either dangerous, not dangerous, or inert, in an effort to diagnose its proper management and disposal. For this reason, this study focuses on the characterization of bottom ash. Samples were collected from a combustion chamber, over a period of 1 year, and a series of tests were conducted, including an analysis of particle size distribution, morphology, mineralogical and chemical composition, heavy metal leaching behavior and PCDD/F.

[1]  Brian W. Baetz,et al.  Lysimeter Washing of Msw Incinerator Bottom Ash , 1995 .

[2]  Gilles Mertens,et al.  Assessment of Pb-slag, MSWI bottom ash and boiler and fly ash for using as a fine aggregate in cement mortar. , 2008, Journal of hazardous materials.

[3]  L. Reijnders Disposal, uses and treatments of combustion ashes: a review , 2005 .

[4]  Santiago Gassó,et al.  Characterization of Municipal Solid Waste Incineration Residues from Facilities with Different Air Pollution Control Systems , 1997 .

[5]  Y. Kashima,et al.  Dioxin-like potencies and extractable organohalogens (EOX) in medical, municipal and domestic waste incinerator ashes in Japan. , 2003, Chemosphere.

[6]  I Ortiz,et al.  Characterisation and management of incinerator wastes. , 2000, Journal of hazardous materials.

[7]  Karl-Werner Schramm,et al.  Concentrations of polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans in soil in the vicinity of a landfill. , 2004, Chemosphere.

[8]  A Polettini,et al.  Physical and mechanical properties of cement-based products containing incineration bottom ash. , 2003, Waste management.

[9]  J. Tay,et al.  Bricks Manufactured from Sludge , 1987 .

[10]  Yoon-Seok Chang,et al.  Characterization of polychlorinated dibenzo-p-dioxins, dibenzofurans, biphenyls, and heavy metals in fly ash produced from korean municipal solid waste incinerators , 1999 .

[11]  Ranjna Jindal,et al.  Heavy Metals in Bottom Ash from a Medical-Waste Incinerator in Thailand , 2004 .

[12]  Karl-Werner Schramm,et al.  Chemical impact of uncontrolled solid waste combustion to the vicinity of the kouroupitos ravine, Crete, Greece , 1998 .

[13]  K. Schramm,et al.  Quality criteria for the isotope dilution method with HRGC/MS , 1996, Analytical and bioanalytical chemistry.

[14]  G C Frantz,et al.  STRENTGTH OF CONCRETE CONTAINING MUNICIPAL SOLID WASTE FLY ASH , 1991 .

[15]  D. Thielen,et al.  Optimization of alumina selectivity for tetrachlorodibenzo-p-dioxins and the isomer-specific determination of 2,3,7,8-tetrachlorodibenzo-p-dioxin , 1988 .

[16]  P. J. Wainwright,et al.  Science and engineering of recycling for environmental protection: an overview of the WASCON 2000 Conference , 2001 .

[17]  Anthony T. C. Goh,et al.  ENGINEERING PROPERTIES OF INCINERATOR RESIDUE , 1991 .

[18]  Walter H. Gutenmann,et al.  Element immobilization in refuse incinerator ashes by solidification in glass, ceramic or cement , 1989 .

[19]  J. Tay,et al.  Sludge Ash as Filler for Portland Cement Concrete , 1987 .

[20]  Aykan Karademir,et al.  Adsorbable Organic Halogens (AOXs) in Solid Residues from Hazardous and Clinical Waste Incineration , 2006, Journal of environmental science and health. Part A, Toxic/hazardous substances & environmental engineering.

[21]  Ming-Yen Wey,et al.  Comparison of the characteristics of bottom and fly ashes generated from various incineration processes. , 2006, Journal of hazardous materials.

[22]  A. Idris,et al.  Characteristics of slag produced from incinerated hospital waste. , 2002, Journal of hazardous materials.

[23]  Athanasios Valavanidis,et al.  Metal leachability, heavy metals, polycyclic aromatic hydrocarbons and polychlorinated biphenyls in fly and bottom ashes of a medical waste incineration facility , 2008, Waste management & research : the journal of the International Solid Wastes and Public Cleansing Association, ISWA.

[24]  Fu-Shen Zhang,et al.  Chemical properties of heavy metals in typical hospital waste incinerator ashes in China , 2008, Waste Management.