How to monitor the modulus of elasticity of concrete, automatically since the earliest age?

Monitoring the evolution of an early age set of parameters on concrete is necessary to predict the early age behaviour of structures. The difficulty lies in the fact that this monitoring must be automatic because the concrete hardening process takes place over a long period after the casting. This paper presents a new methodology and an apparatus, specifically designed at IFSTTAR, to monitor the hardening process of a concrete. Mainly, the Young’s modulus can be monitored in compression. Measurements start soon after having cast the concrete and the sample temperature is completely controlled so that the concrete maturity is well mastered. The performances of this apparatus, obtained on an ordinary concrete, are compared to more classical measurements using an extensometer mounted on the sample just after the setting time and to ultrasonic measurements. In these cases, the temperatures were not controlled and results have to be expressed in equivalent time. A comparison with another method developed and used at ULB by using the same concrete, in the frame of a joined cooperation between our two laboratories is achieved. This test set up is based on the so called Temperature Stress Testing Machine (TSTM). This device has been specifically designed with a control of the concrete maturity by the use of a dummy specimen only submitted to free deformations (thermal, shrinkage). The TSTM allows compressive and tensile testing starting just after the setting time. In addition, concrete properties, such as compressive and tensile strength, have been characterized at early age. These values have been used for the design of the loading histories applied in the automatic tests. The heat released by the cement hydration has also been measured in order to express the results on a maturity scale.

[1]  C. Grosse.  Ultrasound in through-transmission , 2005 .

[2]  W. Hansen.  Report on Early-Age Cracking , 2011 .

[3]  L. Arnaud.  Wave propagation by transmission: the case of the setting phenome-non in heterogeneous materials , 2005 .

[4]  S. Staquet,et al.  Determination of time-zero and its effect on autogenous deformation evolution , 2011 .

[5]  Nele De Belie,et al.  Monitoring the setting of concrete containing blast-furnace slag by measuring the ultrasonic p-wave velocity , 2008 .

[6]  Stéphanie Staquet,et al.  Testing Concrete Since Setting Time Under Free and Restrained Conditions , 2012, Advanced Techniques for Testing of Cement-Based Materials.

[7]  Stéphanie Staquet,et al.  Monitoring of the ultrasonic P-wave velocity in early-age concrete with embedded piezoelectric transducers , 2012 .

[8]  S. Staquet,et al.  Effect of autogenous deformation on the cracking risk of slag cement concretes , 2011 .

[9]  C. Boulay,et al.  Un extensomètre à béton éliminant l'influence des déformations transversales sur la mesure des déformations longitudinales , 1981 .

[10]  J. Torrenti,et al.  Quasi-adiabatic calorimetry for concretes : Influential factors , 2010 .

[11]  Stéphanie Staquet,et al.  Monitoring of the concrete setting with an automatic method , 2010 .

[12]  Th. Voigt,et al.  Comparison of ultrasonic wave transmission and reflection measurements with P- and S-waves on early age mortar and concrete , 2005 .

[13]  Luc Taerwe,et al.  Degree of hydration-based description of mechanical properties of early age concrete , 1996 .

[14]  W. E. Lawrie,et al.  Ultrasonic testing of materials: 2nd English Edition, translated from the 3rd German Edition, J. & H. Krautkrämer Springer-Verlag, Berlin, Heidelberg, New York (1977) 667 pp, $65.20, DM 148 , 1978 .

[15]  H. Reinhardt,et al.  Continuous monitoring of setting and hardening of mortar and concrete , 2004 .

[16]  Jeffrey W. Bullard,et al.  Detecting the Fluid-to-Solid Transition in Cement Pastes , 2009 .

[17]  G. Cannard,et al.  LE SUIVI DE LA PRISE DES CIMENTS PAR ULTRASONS , 1990 .

[18]  Bernhard A. Schrefler,et al.  Modeling concrete under severe conditions as a multiphase material , 2011 .

[19]  P. Rossi,et al.  From local to global probabilistic modeling of concrete cracking , 2010 .

[20]  Rui Faria,et al.  Measurement of concrete E-modulus evolution since casting: A novel method based on ambient vibration , 2010 .

[21]  Robert J. Flatt,et al.  Yield Stress During Setting of Cement Pastes From Penetration Tests , 2009 .

[22]  E. Rastrup,et al.  Heat of hydration in concrete , 1954 .

[23]  L P Mercer,et al.  General model for nutritional responses of higher organisms. , 1975, Proceedings of the National Academy of Sciences of the United States of America.

[24]  F. Cohen Tenoudji,et al.  Mechanical properties of cement pastes and mortars at early ages: Evolution with time and degree of hydration , 1996 .