Mechanical comparison of a polymer nanocomposite to a ceramic thin-film anti-reflective filter

Thin-film filters on optical components have been in use for decades and, for those industries utilizing a polymer substrate, the mismatch in mechanical behaviour has caused problems. Surface damage including scratches and cracks induces haze on the optical filter, reducing the transmission of the optical article. An in-mold anti-reflective (AR) filter incorporating 1/4-wavelength thin films based on a polymer nanocomposite is outlined here and compared with a traditional vacuum deposition AR coating. Nanoindentation and nanoscratch techniques are used to evaluate the mechanical properties of the thin films. Scanning electron microscopy (SEM) images of the resulting indentations and scratches are then compared to the force deflection curves to further explain the phenomena. The traditional coatings fractured by brittle mechanisms during testing, increasing the area of failure, whereas the polymer nanocomposite gave ductile failure with less surface damage.

[1]  B. Bhushan,et al.  A Review of Nanoindentation Continuous Stiffness Measurement Technique and Its Applications , 2002 .

[2]  J. Loos,et al.  Mechanical properties of silica-(meth)acrylate hybrid coatings on polycarbonate substrate , 2002 .

[3]  Bharat Bhushan,et al.  Fracture Mechanisms of Thin Amorphous Carbon Films in Nanoindentation , 1997 .

[4]  Helmut K. Schmidt,et al.  Interference coatings on glass based on photopolymerizable nanomer material , 1999 .

[5]  Frank Richter,et al.  Determination of mechanical film properties of a bilayer system due to elastic indentation measurements with a spherical indenter , 2000 .

[6]  Huajian Gao,et al.  Elastic contact versus indentation modeling of multi-layered materials , 1992 .

[7]  K. Bouzakis,et al.  The effect of specimen roughness and indenter tip geometry on the determination accuracy of thin hard coatings stress–strain laws by nanoindentation , 2002 .

[8]  H. Schmidt,et al.  Multilayer NIR reflective coatings on transparent plastic substrates from photopolymerizable nanoparticulate sols , 1999 .

[9]  D. Meyerhofer Characteristics of resist films produced by spinning , 1978 .

[10]  C. Charitidis,et al.  Comparison of the nanomechanical and nanoscratch performance of antiscratch layers on organic lenses , 2004 .

[11]  Brian J. Briscoe,et al.  Scratching maps for polymers , 1996 .

[12]  C. Macosko,et al.  Spin coating: One‐dimensional model , 1989 .

[13]  B. Coleman,et al.  Scratch behavior and material property relationship in polymers , 2001 .

[14]  Bharat Bhushan,et al.  Nanomechanical characterisation of solid surfaces and thin films , 2003 .

[15]  H. Imai,et al.  Densification of Sol-Gel Thin Films by Ultraviolet and Vacuum Ultraviolet Irradiations , 1997 .

[16]  William D. Nix,et al.  Effects of the substrate on the determination of thin film mechanical properties by nanoindentation , 2002 .

[17]  G. Pharr,et al.  An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments , 1992 .

[18]  Y. Mai,et al.  Scratch damage of polymers in nanoscale , 2004 .

[19]  Thad Druffel,et al.  Anti-reflective optical coatings incorporating nanoparticles , 2005, Nanotechnology.

[20]  Herbert Krug,et al.  Generation of wet-chemical AR coatings on plastic substrates by the use of polymerizable nanoparticles , 1997, Optics & Photonics.

[21]  B. Lawn,et al.  Contact-induced damage in ceramic coatings on compliant substrates : Fracture mechanics and design , 2001 .

[22]  E. Grulke,et al.  Nanoindentation behavior of ultrathin polymeric films , 2005 .

[23]  J. Malzbender,et al.  Measuring mechanical properties of coatings: a methodology applied to nano-particle-filled sol–gel coatings on glass , 2002 .

[24]  H. Macleod,et al.  Thin-Film Optical Filters , 1969 .

[25]  B. Bhushan,et al.  Micro/nanomechanical and tribological characterization of ultrathin amorphous carbon coatings , 1999 .

[26]  S. Han,et al.  Determining hardness of thin films in elastically mismatched film-on-substrate systems using nanoindentation , 2006 .