Bidirectional Radio-Over-Fiber Systems Using Double-Clad Fibers for Optically Powered Remote Antenna Units

This paper shows and experimentally demonstrates bidirectional radio over fiber (RoF) using a double-clad fiber (DCF) for optically powered remote antenna units (RAUs). The DCF for an RoF link has a single mode (SM) core and a multimode inner cladding; the SM core is used for simultaneous downlink and uplink transmissions of the optical RoF data signals, whereas the inner cladding is used for optical power delivery to the RAU. The aim of this approach is to optically power the RAU in such a way that external electrical power supplies, such as batteries or public power lines, are not required. The feasibility of the technique is demonstrated by bidirectional RoF transmission over a 100-m DCF optically feeding with 4.0 W. We successfully achieved high downlink and uplink transmission performance in terms of error vector magnitude measurements, which are based on the IEEE 802.11g wireless local area network (WLAN) standard at a carrier frequency of 2.45 GHz.

[1]  R. C. Miller,et al.  B.S.T.J. brief: Optically powered speech communication over a fiber lightguide , 1979, The Bell System Technical Journal.

[2]  P. R. Nannery,et al.  Extending the Service Life of 15KV Polyethylene URD Cable Using Silicone Liquid , 1989, IEEE Power Engineering Review.

[3]  Alan R. Johnston,et al.  Optically Powered Data Link for Power System Applications , 1989, IEEE Power Engineering Review.

[4]  A. J. Cooper.  'Fibre/radio' for the provision of cordless/mobile telephony services in the access network , 1990 .

[5]  R. C. Estes,et al.  Powering the fiber loop optically-a cost analysis , 1993 .

[6]  M López-Amo,et al.  Fiber-based 205-mW (27% efficiency) power-delivery system for an all-fiber network with optoelectronic sensor units. , 1999, Applied optics.

[7]  Miyamoto,et al.  Novel Radio on Fiber Access Eliminating External Electric Power Supply at Base Station , 2003 .

[8]  Masud Mansuripur,et al.  Tapered fiber bundles for combining high-power diode lasers. , 2004, Applied optics.

[9]  Takashi Kurokawa,et al.  Design approaches to power-over-optical local-area-network systems. , 2004, Applied optics.

[10]  N. Nakajima.  ROF Technologies Applied for Cellular and Wireless Systems , 2005, 2005 International Topical Meeting on Microwave Photonics.

[11]  José Capmany,et al.  Microwave photonics combines two worlds , 2007 .

[12]  Holger Claussen,et al.  An overview of the femtocell concept , 2008, Bell Labs Technical Journal.

[13]  A. Nkansah,et al.  Optically Powered Remote Units for Radio-Over-Fiber Systems , 2008, Journal of Lightwave Technology.

[14]  M Dreschmann,et al.  Optically powered fiber networks. , 2008, Optics express.

[15]  M. Sauer,et al.  Radio over fiber for picocellular network architectures , 2009, 2009 IEEE LEOS Annual Meeting Conference Proceedings.

[16]  David J. Richardson,et al.  High power fiber lasers: current status and future perspectives [Invited] , 2010 .

[17]  Nathan J Gomes,et al.  Radio Over Fiber Link Design for Next Generation Wireless Systems , 2010, Journal of Lightwave Technology.

[18]  Christophe Loyez,et al.  Energy-Autonomous Picocell Remote Antenna Unit for Radio-Over-Fiber System Using the Multiservices Concept , 2012, IEEE Photonics Technology Letters.

[19]  K. Williams,et al.  Microwave photonics , 2002 .

[20]  Motoharu Matsuura,et al.  Radio-over-fiber transmission with optical power supply using a double-clad fiber , 2013, 2013 18th OptoElectronics and Communications Conference held jointly with 2013 International Conference on Photonics in Switching (OECC/PS).

[21]  Matsuura Motoharu.  Power-Over-Fiber Using Double-Clad Fibers for Radio-Over-Fiber Systems , 2016 .