Measurement errors and uncertainties

This chapter introduces the definition of measurement errors and uncertainties. The accuracy of measurement is described by trueness and precision. The uncertainties in the measurement are classified by type A and type B. The sources of uncertainties in measurements are explained. Finally, the evaluation process of uncertainties is described in detail.

[1]  Bertil Magnusson,et al.  Understanding the meaning of accuracy, trueness and precision , 2007 .

[2]  Tze-Fun Chan,et al.  Applied Intelligent Control of Induction Motor Drives , 2011 .

[3]  X. Roboam,et al.  Energy optimization of induction motor drives , 2004, 2004 IEEE International Conference on Industrial Technology, 2004. IEEE ICIT '04..

[4]  Wenping Cao,et al.  Comparison of IEEE 112 and New IEC Standard 60034-2-1 , 2008, IEEE Transactions on Energy Conversion.

[5]  S. Paramasivam,et al.  Development of torque and flux ripple minimization algorithm for direct torque control of induction motor drive , 2006 .

[6]  H. Dalvand,et al.  Techno-Economic Evaluation of Energy Efficiency Measures in Iranian Industrial 3-Phase Electric Motors , 2006, 2006 IEEE International Power and Energy Conference.

[7]  Keli Shi.  Intelligent control for an induction motor , 2001 .

[8]  Diego Zappa,et al.  ISO 5725 and GUM: comparison and comments , 2009 .

[9]  Andrzej M. Trzynadlowski,et al.  Control of Induction Motors , 2000 .

[10]  Dong Hwa Kim,et al.  Loss Minimization Control of Induction Motor Using GA-PSO , 2005, KES.

[11]  Oscar Barambones,et al.  A robust vector control for induction motor drives with an adaptive sliding-mode control law , 2011, J. Frankl. Inst..

[12]  G. Scelba,et al.  Efficiency optimization techniques via constant optimal slip control of induction motor drives , 2006, International Symposium on Power Electronics, Electrical Drives, Automation and Motion, 2006. SPEEDAM 2006..

[13]  Semyon G. Rabinovich,et al.  Measurement Errors and Uncertainties: Theory and Practice , 1999 .

[14]  W. Kessel,et al.  Measurement uncertainty according to ISO/BIPM-GUM , 2002 .

[15]  Leopoldo Angrisani,et al.  Unscented transform: a powerful tool for measurement uncertainty evaluation , 2005, IEEE Transactions on Instrumentation and Measurement.

[16]  Durmus Kaya.  Experimental study on regaining the tangential velocity energy of axial flow pump , 2003 .

[17]  Antero Arkkio,et al.  Electromechanical interaction in rotordynamics of cage induction motors , 2005 .

[18]  Rahman Saidur,et al.  A review on electrical motors energy use and energy savings , 2010 .

[19]  S. Sujitjorn,et al.  Numerical approach to loss minimization in an induction motor , 2004 .

[20]  Sadegh Vaez-Zadeh,et al.  A CONTINUOUS EFFICIENCY OPTIMIZATION CONTROLLER FOR INDUCTION MOTOR DRIVES , 2005 .

[21]  A.K. Wallace,et al.  Motor efficiency determination: from testing laboratory to plant installation , 1999, Conference Record of 1999 Annual Pulp and Paper Industry Technical Conference (Cat. No.99CH36338).

[22]  M. A. Saidel,et al.  Assessment and optimization of induction electric motors aiming energy efficiency in industrial applications , 2010, The XIX International Conference on Electrical Machines - ICEM 2010.

[23]  S. Standard.  GUIDE TO THE EXPRESSION OF UNCERTAINTY IN MEASUREMENT , 2006 .

[24]  A. Binder,et al.  Evaluation of different measurement methods to determine stray load losses in induction machines , 2006, International Symposium on Power Electronics, Electrical Drives, Automation and Motion, 2006. SPEEDAM 2006..

[25]  D. F. Warne,et al.  Newnes Electrical Power Engineer's Handbook , 2000 .

[26]  Bimal K. Bose,et al.  Power Electronics and Motor Drives: Advances and Trends , 2006 .

[27]  Sheam-Chyun Lin,et al.  An integrated experimental and numerical study of forward–curved centrifugal fan , 2002 .

[28]  Badrul H. Chowdhury,et al.  Sensorless control of inverter-fed induction motor drives , 2007 .

[29]  Wang Huangang,et al.  Variable-structure torque control of induction motors using space vector modulation , 2005 .

[30]  Pierre Rouchon,et al.  Industrial sensorless control of induction motors , 2001 .

[31]  S. Lim,et al.  Loss-minimising control scheme for induction motors , 2004 .

[32]  Teuku Meurah Indra Mahlia,et al.  Considerations for the selection of an applicable energy efficiency test procedure for electric motors in Malaysia: Lessons for other developing countries , 2009 .

[33]  S. Baskar,et al.  A novel efficiency improvement measure in three-phase induction motors, its conservation potential and economic analysis , 2008 .

[34]  Alistair B. Forbes,et al.  Advanced Mathematical and Computational Tools in Metrology and Testing: AMCTM VIII , 2009 .

[35]  A. R. Ganji,et al.  Introduction to Engineering Experimentation , 1995 .

[36]  Jacob Fraden,et al.  Handbook of modern sensors , 1997 .

[37]  Ieee Standards Board.  IEEE standard test procedure for polyphase induction motors and generators , 1992 .

[38]  James E. McMahon,et al.  Governments should implement energy-efficiency standards and labels--cautiously , 2003 .

[39]  Kerstin Fink.  Knowledge Potential Measurement and Uncertainty , 2004 .

[40]  Paolo Valigi,et al.  Adaptive nonlinear control of induction motors via extended matching , 1991 .

[41]  Cenk Celik,et al.  Energy Efficiency in Pumps , 2008, Energy Management and Energy Efficiency in Industry.

[42]  Haji Hassan Masjuki,et al.  Theory of energy efficiency standards and labels , 2002 .

[43]  Emmanuel B. Agamloh.  The repeatability of IEEE standard 112B induction motor efficiency tests , 2009, 2009 IEEE International Electric Machines and Drives Conference.

[44]  Paula Fonseca,et al.  Energy-efficient motor systems in the industrial and in the services sectors in the European Union: characterisation, potentials, barriers and policies , 2003 .

[45]  M.N. Uddin,et al.  Model-Based Loss Minimization Control of an Induction Motor Drive , 2006, 2006 IEEE International Symposium on Industrial Electronics.

[46]  Hazem N. Nounou,et al.  Application of adaptive fuzzy control to ac machines , 2007, Appl. Soft Comput..

[47]  Stan Shiels.  Locating the greatest centrifugal pump energy savings , 2004 .