Thermophysical Properties of 1-Butyl-1-methyl-pyrrolidinium Dicyanamide + H2O Mixtures

The properties of mixtures of ionic liquids and water are very important for many applications. One key application is their use as absorbents in absorption refrigeration cycles, replacing water + LIBr and water + ammonia systems. As a possible mixture, the system [Bmpyr][dca] + H2O was studied, as the available data are scarce. Measurements of density, speed of sound, viscosity, and surface tension of [Bmpyr][dca] + H2O were made for seven molar compositions between 288.15 K and 333.15 K. The uncertainty of the density values is 0.07 kg·m–3, while that of the speed of sound was found to be 0.3 m·s–1. Viscosity measurements have an uncertainty of 1.4 %, while the surface tension values have an uncertainty lower than ±0.6 mN·m–1. All the measurement were measured at atmospheric pressure and are reported to 0.1 MPa ± 1 kPa. From density data, isobaric molar expansions were calculated and from combined density and speed of sound data, isentropic molar compressions were also obtained. Finally, excess molar vo...

[1]  Ângela F. Santos,et al.  Thermodynamic study of aqueous 2-(isopropylamino)ethanol. A sterically hindered new amine absorbent for CO 2 capture , 2015 .

[2]  A. Pádua,et al.  Thermophysical properties of ionic liquid dicyanamide (DCA) nanosystems , 2014 .

[3]  J. C. Reis,et al.  New thermodynamics for evaluating the surface-phase enrichment in the lower surface tension component. , 2014, Chemphyschem : a European journal of chemical physics and physical chemistry.

[4]  M. Zawadzki,et al.  Physicochemical and thermodynamic study on aqueous solutions of dicyanamide – based ionic liquids , 2014 .

[5]  U. Domańska,et al.  Renewable feedstocks in green solvents: thermodynamic study on phase diagrams of D-sorbitol and xylitol with dicyanamide based ionic liquids. , 2013, The journal of physical chemistry. B.

[6]  Emilio J. González,et al.  Thermophysical Properties of the Pure Ionic Liquid 1-Butyl-1-methylpyrrolidinium Dicyanamide and Its Binary Mixtures with Alcohols , 2013 .

[7]  S. M. Sohel Murshed,et al.  Thermal Conductivity of [C4mim][(CF3SO2)2N] and [C2mim][EtSO4] and Their IoNanofluids with Carbon Nanotubes: Experiment and Theory , 2013 .

[8]  E. Macedo,et al.  Physical and Excess Properties of Eight Binary Mixtures Containing Water and Ionic Liquids , 2012 .

[9]  J. C. Reis,et al.  Ultrasound speeds and molar isentropic compressions of aqueous 1-propoxypropan-2-ol mixtures from T = (283.15 to 303.15) K. Influence of solute structure , 2012 .

[10]  H. Bermudez,et al.  Solubility and aggregation of charged surfactants in ionic liquids. , 2012, Langmuir : the ACS journal of surfaces and colloids.

[11]  B. Saramago,et al.  Surface tension of ionic liquids and ionic liquid solutions. , 2012, Chemical Society reviews.

[12]  A. Blahut,et al.  Interactions of Volatile Organic Compounds with the Ionic Liquid 1-Butyl-1-methylpyrrolidinium Dicyanamide , 2011 .

[13]  C. A. N. Castro,et al.  A new and reliable calibration method for vibrating tube densimeters over wide ranges of temperature and pressure , 2011 .

[14]  A. Ribeiro,et al.  Electrical Conductivity and Viscosity of 1-Hexyl-3-methylimidazolium Bis(trifluorosulfonyl)imide, [C6mim] [(CF3SO2)2N] (CAS-RN# 382150-50-7) , 2010 .

[15]  J. Esperança,et al.  Studies on the density, heat capacity, surface tension and infinite dilution diffusion with the ionic liquids (C4mim)(NTf2), (C4mim)(dca), (C2mim)(EtOSO3) and (Aliquat)(dca) , 2010 .

[16]  G. Wytze Meindersma,et al.  Density, viscosity, and surface tension of synthesis grade imidazolium,pyridinium, and pyrrolidinium based room temperature ionic liquids , 2009 .

[17]  José S. Torrecilla,et al.  Effect of Cationic and Anionic Chain Lengths on Volumetric, Transport, and Surface Properties of 1-Alkyl-3-methylimidazolium Alkylsulfate Ionic Liquids at (298.15 and 313.15) K , 2009 .

[18]  I. Marrucho,et al.  Surface tensions of imidazolium based ionic liquids: anion, cation, temperature and water effect. , 2007, Journal of colloid and interface science.

[19]  Y. Ouchi,et al.  Gibbs monolayer of ionic liquid + H2O mixtures studied by surface tension measurement and sum-frequency generation spectroscopy , 2006 .

[20]  P. Letellier,et al.  Evidence of a phase transition in water-1-butyl-3-methylimidazolium tetrafluoroborate and water-1-butyl-2,3-dimethylimidazolium tetrafluoroborate mixtures at 298 K: determination of the surface thermal coefficient, bT,P. , 2006, The journal of physical chemistry. B.

[21]  Y. Ouchi,et al.  Air–liquid interface of ionic liquid + H2O binary system studied by surface tension measurement and sum-frequency generation spectroscopy , 2005 .

[22]  D. Macfarlane,et al.  Ionic liquids based on imidazolium, ammonium and pyrrolidinium salts of the dicyanamide anion , 2002 .

[23]  K. Shinoda,et al.  The Surface Tension and the Critical Micelle Concentration in Aqueous Solution of β-D-Alkyl Glucosides and their Mixtures , 1961 .

[24]  Y. Ouchi,et al.  Photoluminescence characteristics of merocyanine dyes in ionic liquids , 2006 .

[25]  M. J. Blandamer,et al.  The concepts of non-Gibbsian and non-Lewisian properties in chemical thermodynamics , 2001 .