Solution-processable small molecules as efficient universal bipolar host for blue, green and red phosphorescent inverted OLEDs

Inverted organic light-emitting diodes (IOLEDs) with a bottom cathode are of great interest for large-size active-matrix displays due to their easy integration with n-type thin film transistors (TFTs) based on low-cost and highly-uniform amorphous silicon and oxide. In this work, a solution-processable electron transporting material 2,7-bis(diphenylphosphoryl)-9,9′-spirobi[fluorene] (SPPO13) is employed to blend with a solution-processable hole transporting material 4,4′,4′′-tri(9-carbazoyl)triphenylamine (TCTA) to be used as a universal bipolar co-host for blue, green and red phosphors, and for the first time, phosphorescent IOLEDs are fabricated by solution-processing small molecules. High efficiency and reduced efficiency roll-off are achieved in the solution-processed IOLEDs, which mainly contribute to the high quality of the solution-processed small molecule films as well as the balanced charge injection in the co-host system. Importantly, the solution process is advantageous over vacuum evaporation to deposit multi-component small molecule films, and can be expected to reduce manufacturing costs. Our results demonstrate a promising approach to fabricate low-cost and high-performance IOLEDs for n-type TFT-based displays.

[1]  Yeon-Gon Mo,et al.  High mobility bottom gate InGaZnO thin film transistors with SiOx etch stopper , 2007 .

[2]  J. Qin,et al.  Highly Efficient Deep‐Blue Electrophosphorescence Enabled by Solution‐Processed Bipolar Tetraarylsilane Host with Both a High Triplet Energy and a High‐Lying HOMO Level , 2011, Advanced materials.

[3]  S. Jang,et al.  High quantum efficiency in simple blue phosphorescent organic light-emitting diodes without any electron injection layer , 2010 .

[4]  S. Jeon,et al.  Fabrication and Efficiency Improvement of Soluble Blue Phosphorescent Organic Light‐Emitting Diodes Using a Multilayer Structure Based on an Alcohol‐Soluble Blue Phosphorescent Emitting Layer , 2010, Advanced materials.

[5]  Wolfgang Kowalsky,et al.  Zinc tin oxide based driver for highly transparent active matrix OLED displays , 2009 .

[6]  Gregor Schwartz,et al.  White organic light-emitting diodes with fluorescent tube efficiency , 2009, Nature.

[7]  H. Snaith,et al.  Efficient Single‐Layer Polymer Light‐Emitting Diodes , 2010, Advanced materials.

[8]  Ruth Shinar,et al.  High‐Efficiency Solution‐Processed Small Molecule Electrophosphorescent Organic Light‐Emitting Diodes , 2011, Advanced materials.

[9]  Jenn‐Fang Chen,et al.  Stable inverted bottom-emitting organic electroluminescent devices with molecular doping and morphology improvement , 2006 .

[10]  X. Jing,et al.  Solution‐Processible Red Iridium Dendrimers based on Oligocarbazole Host Dendrons: Synthesis, Properties, and their Applications in Organic Light‐Emitting Diodes , 2008 .

[11]  E. Coronado,et al.  White Hybrid Organic−Inorganic Light-Emitting Diode Using ZnO as the Air-Stable Cathode , 2009 .

[12]  Dongge Ma,et al.  Effects of carrier trapping and scattering on hole transport properties of N,N′-diphenyl-N,N′-bis(1-naphthyl)-1,1′-biphenyl-4,4′-diamine thin films , 2011 .

[13]  A. Nathan,et al.  Driving schemes for a-Si and LTPS AMOLED displays , 2005, Journal of Display Technology.

[14]  Jeonghun Kwak,et al.  Improvement of electron injection in inverted bottom-emission blue phosphorescent organic light emitting diodes using zinc oxide nanoparticles , 2010 .

[15]  Jianbin Xu,et al.  Application of admittance spectroscopy to evaluate carrier mobility in organic charge transport materials , 2006 .

[16]  High power efficiency in simplified two layer blue phosphorescent organic light-emitting diodes , 2010 .

[17]  K. K. Tsung,et al.  Advantages of admittance spectroscopy over time-of-flight technique for studying dispersive charge transport in an organic semiconductor , 2009 .

[18]  Paul E. Burrows,et al.  Organic Light-Emitting Devices for Solid-State Lighting , 2008 .

[19]  Hye Yong Chu,et al.  Stable efficiency roll-off in blue phosphorescent organic light-emitting diodes by host layer engineering , 2009 .

[20]  Dongge Ma,et al.  Cesium hydroxide doped tris-(8-hydroxyquinoline) aluminum as an effective electron injection layer in inverted bottom-emission organic light emitting diodes , 2008 .

[21]  The relationship between the device performance and hole mobility of host materials in mixed host system for deep blue phosphorescent organic light emitting devices , 2011 .

[22]  W. Hsu,et al.  Effect of annealing ZnO on the performance of inverted polymer light-emitting diodes based on SAM/ZnO as an electron injection layer , 2011 .

[23]  H. Bolink,et al.  Hybrid Organic–Inorganic Light‐Emitting Diodes , 2011, Advanced materials.

[24]  S. Jeon,et al.  Phosphine oxide derivatives for organic light emitting diodes , 2012 .

[25]  Fei Huang,et al.  Highly Efficient Polymer White‐Light‐Emitting Diodes Based on Lithium Salts Doped Electron Transporting Layer , 2009 .

[26]  D. Bradley,et al.  A Hybrid Inorganic–Organic Semiconductor Light‐Emitting Diode Using ZrO2 as an Electron‐Injection Layer , 2009 .

[27]  H. Chu,et al.  Improved performance of blue phosphorescent organic light-emitting diodes with a mixed host system , 2009 .

[28]  E. Coronado,et al.  Phosphorescent Hybrid Organic–Inorganic Light‐Emitting Diodes , 2010, Advanced materials.

[29]  Dongge Ma,et al.  The modification of self-assembled monolayer on indium tin oxide as cathode in inverted bottom-emitting organic light-emitting diodes , 2008 .

[30]  Hongbin Wu,et al.  Highly Efficient Electron Injection from Indium Tin Oxide/Cross-Linkable Amino-Functionalized Polyfluorene Interface in Inverted Organic Light Emitting Devices , 2011 .

[31]  Dongge Ma,et al.  Origin of improvement in device performance via the modification role of cesium hydroxide doped tris(8-hydroxyquinoline) aluminum interfacial layer on ITO cathode in inverted bottom-emission organic light-emitting diodes , 2009 .

[32]  H. Ohta,et al.  Room-temperature fabrication of transparent flexible thin-film transistors using amorphous oxide semiconductors , 2004, Nature.

[33]  S. Forrest,et al.  Highly efficient phosphorescent emission from organic electroluminescent devices , 1998, Nature.

[34]  X. Jing,et al.  Solution‐Processable Carbazole‐Based Conjugated Dendritic Hosts for Power‐Efficient Blue‐Electrophosphorescent Devices , 2009, Advanced materials.

[35]  R. N. Marks,et al.  Light-emitting diodes based on conjugated polymers , 1990, Nature.

[36]  Wolfgang Kowalsky,et al.  Transparent Inverted Organic Light‐Emitting Diodes with a Tungsten Oxide Buffer Layer , 2008 .

[37]  C. Tang,et al.  Organic Electroluminescent Diodes , 1987 .

[38]  Dongge Ma,et al.  A soluble nonionic surfactant as electron injection material for high-efficiency inverted bottom-emission organic light emitting diodes , 2008 .

[39]  Juan Bisquert,et al.  Inverted Solution Processable OLEDs Using a Metal Oxide as an Electron Injection Contact. , 2008 .

[40]  Sheng-Fu Horng,et al.  All-solution-processed blue small molecular organic light-emitting diodes with multilayer device structure , 2009 .

[41]  Meng-Huan Ho,et al.  Efficient and color-saturated inverted bottom-emitting organic light-emitting devices with a semi-transparent metal-assisted electron injection layer , 2009 .

[42]  Jenn‐Fang Chen,et al.  Comparative study of single and multiemissive layers in inverted white organic light-emitting devices , 2006 .

[43]  Sung-Yong Min,et al.  Highly efficient hybrid inorganic-organic light-emitting diodes by using air-stable metal oxides and a thick emitting layer. , 2010, ChemSusChem.

[44]  Jong‐Jin Park,et al.  Characteristics of Solution‐Processed Small‐Molecule Organic Films and Light‐Emitting Diodes Compared with their Vacuum‐Deposited Counterparts , 2009 .

[45]  F. So,et al.  High efficiency and low roll-off blue phosphorescent organic light-emitting devices using mixed host architecture , 2010 .

[46]  Hye Yong Chu,et al.  Enhanced efficiency and reduced roll-off in blue and white phosphorescent organic light-emitting diodes with a mixed host structure , 2009 .

[47]  J. Lee,et al.  Effects of charge balance on device performances in deep blue phosphorescent organic light-emitting diodes , 2010 .

[48]  Liduo Wang,et al.  Solution processable small molecules for organic light-emitting diodes , 2010 .

[49]  Henk J. Bolink,et al.  Efficient Polymer Light‐Emitting Diode Using Air‐Stable Metal Oxides as Electrodes , 2009 .

[50]  Stephen R. Forrest,et al.  The path to ubiquitous and low-cost organic electronic appliances on plastic , 2004, Nature.

[51]  Ken-Tsung Wong,et al.  Bipolar Host Materials: A Chemical Approach for Highly Efficient Electrophosphorescent Devices , 2011, Advanced materials.

[52]  Paul S. Andry,et al.  Driving large-sized OLED TVs with an amorphous-silicon backplane , 2005 .