Design and Implementation of an FPGA-Based CCFL Driving System With Digital Dimming Capability

The proliferation of liquid-crystal display (LCD) monitors and notebook computers places an ever-increasing demand on display technology. The LCD with cold cathode fluorescent lamp (CCFL) best satisfies display performance, size, and efficiency. To operate the CCFL, a driving circuit is needed to light the lamp with a relatively high voltage and then stabilize the arc current. For minimizing the component count and size, a high-frequency zero-voltage switching (ZVS) resonant converter is preferred. In this paper, a field-programmable-gate-array-based ZVS resonant converter for driving CCFL with digital dimming capability is presented. The proposed digital controller utilizes the pulse density modulation technique to adjust the output power. A 3-W prototyping system is built and tested; experimental results show that the proposed system can reduce the voltage spike by more than 15%, compared to the low-frequency dimming methods. The overall system power efficiency is approximately 85%. The advantages of the proposed system include high efficiency, low output voltage and current spike, wide dimming range, flexibility, and compactness.

[1]  Seul Jung,et al.  Hardware Implementation of a Real-Time Neural Network Controller With a DSP and an FPGA for Nonlinear Systems , 2007, IEEE Transactions on Industrial Electronics.

[2]  Oscar Garcia,et al.  Concurrent and simple digital controller of an AC/DC converter with power factor correction based on an FPGA , 2003 .

[3]  M. M. Jovanovic,et al.  The LCC inverter as a cold cathode fluorescent lamp driver , 1994, Proceedings of 1994 IEEE Applied Power Electronics Conference and Exposition - ASPEC'94.

[4]  Yie-Tone Chen,et al.  Analysis and design of a dimmable electronic ballast controlled by a switch-controlled capacitor , 2005, IEEE Trans. Ind. Electron..

[5]  A. Muthuramalingam,et al.  Performance evaluation of an FPGA controlled soft switched inverter , 2006, IEEE Transactions on Power Electronics.

[6]  L. Brush,et al.  CCFL inverters: opportunity or threat , 2006, Twenty-First Annual IEEE Applied Power Electronics Conference and Exposition, 2006. APEC '06..

[7]  R. G. Stewart,et al.  A novel large area color LCD backlight system , 1990, IEEE Conference on Aerospace and Electronics.

[8]  Saad Mekhilef,et al.  Modeling of Three-Phase Uniform Symmetrical Sampling Digital PWM for Power Converter , 2005, IEEE Transactions on Industrial Electronics.

[9]  Li Peng,et al.  A Novel PWM Technique in Digital Control , 2007, IEEE Transactions on Industrial Electronics.

[10]  Mutsuo Nakaoka,et al.  A novel pulse-density-modulated high-frequency inverter for silent-discharge-type ozonizer , 2002 .

[11]  Cherl-Jin Kim,et al.  A Study on the design and performance of electronic ballast for CCFL dimming control with frequency modulation , 2003, Sixth International Conference on Electrical Machines and Systems, 2003. ICEMS 2003..

[12]  C. S. Moo,et al.  Electronic ballast with piezoelectric transformer for cold cathode fluorescent lamps , 2003 .

[13]  Sang Kyung Kim,et al.  A Low-Cost High-Efficiency CCFL Inverter With New Capacitive Sensing and Control , 2006, IEEE Transactions on Power Electronics.

[14]  Hui Li,et al.  Digital Anti-Windup PI Controllers for Variable-Speed Motor Drives Using FPGA and Stochastic Theory , 2006, IEEE Transactions on Power Electronics.

[15]  Wen-Jung Ho,et al.  A cold-cathode fluorescent lamp driver circuit with synchronous primary-side dimming control , 1998, IEEE Trans. Ind. Electron..

[16]  Jen-Hao Teng,et al.  An FPGA-based lithium-ion battery charger system , 2004, 2004 IEEE Region 10 Conference TENCON 2004..

[17]  Chia-Feng Juang,et al.  Water bath temperature control by a recurrent fuzzy controller and its FPGA implementation , 2006, IEEE Transactions on Industrial Electronics.

[18]  Ching-Tsai Pan,et al.  Design and analysis of an SLPT-based CCFL driver , 2003, IEEE Trans. Ind. Electron..

[19]  Chang-Hua Lin.  The design and implementation of a new digital dimming controller for the backlight resonant inverter , 2005, IEEE Transactions on Power Electronics.

[20]  Faa-Jeng Lin,et al.  FPGA-based fuzzy sliding-mode control for a linear induction motor drive , 2005 .

[21]  Hirofumi Akagi,et al.  Pulse-density-modulated power control of a 4 kW, 450 kHz voltage-source inverter for induction melting applications , 1996 .

[22]  M. A.,et al.  FPGA-based ASIC design of the three-phase synchronous PWM flyback converter , 2004 .

[23]  G. Hekstra,et al.  Dynamic contrast enhancement of liquid crystal displays with backlight modulation , 2005, 2005 Digest of Technical Papers. International Conference on Consumer Electronics, 2005. ICCE..

[24]  Young-Cheol Lim,et al.  An analysis of the backlight inverter by topologies , 2001, ISIE 2001. 2001 IEEE International Symposium on Industrial Electronics Proceedings (Cat. No.01TH8570).

[25]  Gyu-Hyeong Cho,et al.  Detection and regulation of CCFL current and open-lamp voltage while keeping floating condition of the lamp , 2006, IEEE Transactions on Industrial Electronics.

[26]  Y. Liu,et al.  PDM and PFM hybrid control of a series-resonant inverter for corona surface treatment , 2005 .

[27]  S. W. Lee,et al.  Simplified control technique for LCD backlight inverter system using the mixed dimming method , 2001, APEC 2001. Sixteenth Annual IEEE Applied Power Electronics Conference and Exposition (Cat. No.01CH37181).

[28]  Chang-Hua Lin,et al.  Digital-dimming controller with current spikes elimination technique for LCD backlight electronic ballast , 2004 .

[29]  Wei-Chung Cheng,et al.  Power minimization in a backlit TFT-LCD display by concurrent brightness and contrast scaling , 2004, IEEE Transactions on Consumer Electronics.

[30]  Shmuel Ben-Yaakov,et al.  Current-sourcing push-pull parallel-resonance inverter (CS-PPRI): theory and application as a discharge lamp driver , 1994, IEEE Trans. Ind. Electron..

[31]  Zoran A. Salcic,et al.  A floating-point FPGA-based self-tuning regulator , 2006, IEEE Transactions on Industrial Electronics.

[32]  Bo-Hyung Cho,et al.  Analysis of Current Distribution in Driving Multiple Cold Cathode Fluorescent Lamps (CCFL) , 2007, IEEE Transactions on Industrial Electronics.