Dynamic instability of functionally graded multilayer graphene nanocomposite beams in thermal environment

This paper studies the dynamic instability of functionally graded multilayer nanocomposite beams reinforced with a low content of graphene nanoplatelets (GPLs) and subjected to a combined action of a periodic axial force and a temperature change. The weight fraction of GPL nanofillers is assumed to be constant in each individual GPL-reinforced composite (GPLRC) layer but follows a layerwise variation across the beam thickness. The Halpin-Tsai micromechanics model is used to estimate the effective Young’s modulus of GPLRC layers. The differential quadrature method is employed to convert the partial differential governing equations into a linear system of Mathieu-Hill equations, from which the principle unstable region of functionally graded multilayer GPLRC beams is determined by Bolotin’s method. Special attention is given to the effects of GPL distribution pattern, weight fraction, geometry and dimension on the dynamic instability behaviour. The thermal buckling and free vibration are also discussed as subset problems. Numerical results show that distributing more GPLs near the top and bottom surfaces can effectively increase the natural frequency and reduce the size of the unstable region. The influences of GPL geometry and dimension tend to be insignificant when the GPL width-to-thickness ratio is larger than 103.

[1]  Isaac M Daniel,et al.  Mechanical and thermal properties of graphite platelet/epoxy composites , 2004 .

[2]  S. Kitipornchai,et al.  Imperfection sensitivity of postbuckling behaviour of functionally graded carbon nanotube-reinforced composite beams , 2016 .

[3]  S. Tsai,et al.  Introduction to composite materials , 1980 .

[4]  Xi-Qiao Feng,et al.  Micromechanics prediction of the effective elastic moduli of graphene sheet-reinforced polymer nanocomposites , 2010 .

[5]  S. Kitipornchai,et al.  Imperfection sensitivity of thermal post-buckling behaviour of functionally graded carbon nanotube-reinforced composite beams , 2017 .

[6]  J. Kysar,et al.  Measurement of the Elastic Properties and Intrinsic Strength of Monolayer Graphene , 2008, Science.

[7]  Jie Yang,et al.  Thermo-electro-mechanical postbuckling of piezoelectric FG-CNTRC beams with geometric imperfections , 2016 .

[8]  K. Lau,et al.  Stretching process of single- and multi-walled carbon nanotubes for nanocomposite applications , 2004 .

[9]  S. Iijima.  Helical microtubules of graphitic carbon , 1991, Nature.

[10]  R. Ruoff,et al.  Graphene, related two-dimensional crystals, and hybrid systems for energy conversion and storage , 2015, Science.

[11]  Zhong-Zhen Yu,et al.  Buckling resistant graphene nanocomposites , 2009 .

[12]  J. Reddy.  Mechanics of laminated composite plates and shells : theory and analysis , 1996 .

[13]  C. N. Lau,et al.  Superior thermal conductivity of single-layer graphene. , 2008, Nano letters.

[14]  K. M. Liew,et al.  Dynamic stability analysis of carbon nanotube-reinforced functionally graded cylindrical panels using the element-free kp-Ritz method , 2014 .

[15]  Jie Yang,et al.  Dynamic Buckling of Thermo-Electro-Mechanically Loaded FG-CNTRC Beams , 2015 .

[16]  Dajun Chen,et al.  Enhanced Mechanical Properties of Graphene-Based Poly(vinyl alcohol) Composites , 2010 .

[17]  T. Ichihashi,et al.  Single-shell carbon nanotubes of 1-nm diameter , 1993, Nature.

[18]  H. Yan,et al.  Mechanical properties of graphene platelet-reinforced alumina ceramic composites , 2013 .

[19]  A. Haque,et al.  Molecular modeling of crosslinked graphene–epoxy nanocomposites for characterization of elastic constants and interfacial properties , 2013 .

[20]  Shiren Wang,et al.  Thermal Expansion of Graphene Composites , 2009 .

[21]  K. M. Liew,et al.  Mechanical analysis of functionally graded carbon nanotube reinforced composites: A review , 2015 .

[22]  C. Shu.  Differential Quadrature and Its Application in Engineering , 2000 .

[23]  P. Ming,et al.  Ab initio calculation of ideal strength and phonon instability of graphene under tension , 2007 .

[24]  R. Verdejo,et al.  Graphene filled polymer nanocomposites , 2011 .

[25]  Hui-Shen Shen,et al.  Nonlinear bending of functionally graded carbon nanotube-reinforced composite plates in thermal environments , 2009 .

[26]  Mahmoud M. Farag,et al.  Carbon nanotube reinforced composites: Potential and current challenges , 2007 .

[27]  Xu Du,et al.  Approaching ballistic transport in suspended graphene. , 2008, Nature nanotechnology.

[28]  C. Bert,et al.  Differential quadrature for static and free vibration analyses of anisotropic plates , 1993 .

[29]  T. Chou,et al.  Advances in the science and technology of carbon nanotubes and their composites: a review , 2001 .

[30]  M. Syväjärvi,et al.  Graphene Materials: Fundamentals and Emerging Applications , 2015 .

[31]  Sritawat Kitipornchai,et al.  Parametric instability of functionally graded beams with an open edge crack under axial pulsating excitation , 2011 .

[32]  N. Koratkar,et al.  Enhanced mechanical properties of nanocomposites at low graphene content. , 2009, ACS nano.

[33]  Y. Mai,et al.  Effects of particle size, particle/matrix interface adhesion and particle loading on mechanical properties of particulate–polymer composites , 2008 .

[34]  S. Kitipornchai,et al.  Flexural Vibration and Elastic Buckling of a Cracked Timoshenko Beam Made of Functionally Graded Materials , 2009 .

[35]  B. Harris.  Engineering composite materials , 1986 .

[36]  Jie Yang,et al.  Free and forced vibrations of functionally graded polymer composite plates reinforced with graphene nanoplatelets , 2017 .

[37]  Jie Yang,et al.  Free vibration and buckling analysis of sandwich beams with functionally graded carbon nanotube-reinforced composite face sheets , 2015 .

[38]  Andre K. Geim,et al.  Electric Field Effect in Atomically Thin Carbon Films , 2004, Science.

[39]  J. C. H. Affdl,et al.  The Halpin-Tsai Equations: A Review , 1976 .

[40]  Sritawat Kitipornchai,et al.  Dynamic Stability of Functionally Graded Carbon Nanotube-Reinforced Composite Beams , 2013 .

[41]  Jie Yang,et al.  Buckling and postbuckling of functionally graded multilayer graphene platelet-reinforced composite beams , 2017 .

[42]  A. A. Khdeir.  Thermal buckling of cross-ply laminated composite beams , 2001 .

[43]  K. V. Van Vliet,et al.  Layered and scrolled nanocomposites with aligned semi-infinite graphene inclusions at the platelet limit , 2016, Science.

[44]  K. M. Liew,et al.  Non‐linear analysis of the thermo‐electro‐mechanical behaviour of shear deformable FGM plates with piezoelectric actuators , 2004 .

[45]  Jie Yang,et al.  Nonlinear vibration of functionally graded carbon nanotube-reinforced composite beams with geometric imperfections , 2016 .

[46]  Mauricio Terrones,et al.  The carbon nanocosmos: novel materials for the twenty-first century , 2003, Philosophical Transactions of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences.

[47]  V. V. Bolotin,et al.  Dynamic Stability of Elastic Systems , 1965 .