Study on the flux-weakening capability of permanent magnet synchronous motor for electric vehicle

Abstract Flux-weakening capability plays an important component part in technical indexes of permanent magnet synchronous motor (PMSM) for electric vehicle. Starting with vector control theory, the influence of motor flux linkage, salient ratio and winding turns on flux-weakening of PMSM have been analyzed in this paper and a prototype is designed based on the analysis result. Then a comparative analysis between theoretical value and measured value is provided to verify the correctness of the analyses.

[1]  Xu Yang,et al.  Robust PLS approach for KPI-related prediction and diagnosis against outliers and missing data , 2014, Int. J. Syst. Sci..

[2]  Hamid Reza Karimi,et al.  H(infinity) control design for building structures under seismic motion with wireless communication , 2011 .

[3]  Phil Mellor,et al.  Impact of winding and rotor design on efficiency and torque ripple in brushless AC permanent magnet traction motors , 2008 .

[4]  Jae-Kwang Kim,et al.  Characteristic analysis of multilayer-buried magnet synchronous motor using fixed permeability method , 2005 .

[5]  Hamid Reza Karimi,et al.  Data-driven design of robust fault detection system for wind turbines , 2014 .

[6]  J. S. Hsu.  REPORT ON TOYOTA/PRIUS MOTOR TORQUE CAPABILITY, TORQUE PROPERTY, NO-LOAD BACK EMF, AND MECHANICAL LOSSES , 2004 .

[7]  Yoichi Hori,et al.  Advanced Motion Control of Electric Vehicles Based on Robust Lateral Tire Force Control via Active Front Steering , 2014, IEEE/ASME Transactions on Mechatronics.

[8]  Erdal Kayacan,et al.  Distributed nonlinear model predictive control of an autonomous tractor-trailer system , 2014, ArXiv.

[9]  Cheng Shukang.  Outline for Flux Weakening of Permanent Magnet Synchronous Motor , 2008 .

[10]  Alain Bouscayrol,et al.  Coupling Bond Graph and Energetic Macroscopic Representation for Electric Vehicle Simulation , 2014 .

[11]  Tanja Heikkilä,et al.  Permanent magnet synchronous motor for industrial inverter applications : analysis and design , 2002 .

[12]  Shen Yin,et al.  Intelligent Particle Filter and Its Application to Fault Detection of Nonlinear System , 2015, IEEE Transactions on Industrial Electronics.

[13]  Juliette Soulard,et al.  Modeling of iron losses in permanent magnet synchronous motors with field-weakening capability for electric vehicles , 2003 .

[14]  R. H. Staunton,et al.  Evaluation of 2004 Toyota Prius Hybrid Electric Drive System , 2004 .

[15]  Yan Chen,et al.  Design and Experimental Evaluations on Energy Efficient Control Allocation Methods for Overactuated Electric Vehicles: Longitudinal Motion Case , 2014, IEEE/ASME Transactions on Mechatronics.

[16]  M. Trlep,et al.  Power Capability and Flux-Weakening Performance of Interior Permanent Magnet Synchronous Motor With Multiple Flux Barriers , 2006, 2006 12th Biennial IEEE Conference on Electromagnetic Field Computation.

[17]  Luca Zarri,et al.  DTC Drives for Wide Speed Range Applications Using a Robust Flux-Weakening Algorithm , 2007, IEEE Transactions on Industrial Electronics.

[18]  Salih Baris Ozturk,et al.  Direct Torque and Indirect Flux Control of Brushless DC Motor , 2011, IEEE/ASME Transactions on Mechatronics.

[19]  Okyay Kaynak,et al.  Improved PLS Focused on Key-Performance-Indicator-Related Fault Diagnosis , 2015, IEEE Transactions on Industrial Electronics.

[20]  J. S. Hsu.  Report on Toyota/Prius Motor Design and Manufacturing Assessment , 2004 .

[21]  Shen Yin,et al.  Performance Monitoring for Vehicle Suspension System via Fuzzy Positivistic C-Means Clustering Based on Accelerometer Measurements , 2015, IEEE/ASME Transactions on Mechatronics.

[22]  Nesimi Ertugrul,et al.  Iron loss reduction in an interior PM automotive alternator , 2005 .

[23]  Michel Hecquet,et al.  Multiphysics Modeling of a Permanent Magnet Synchronous Machine by Using Lumped Models , 2012, IEEE Transactions on Industrial Electronics.

[24]  Shihua Li,et al.  Disturbance rejection control method for permanent magnet synchronous motor speed-regulation system , 2012 .

[25]  David G. Dorrell,et al.  Analysis and Design Techniques Applied to Hybrid Vehicle Drive Machines—Assessment of Alternative IPM and Induction Motor Topologies , 2012, IEEE Transactions on Industrial Electronics.

[26]  Ayman M. El-Refaie,et al.  Fractional-Slot Concentrated-Windings Synchronous Permanent Magnet Machines: Opportunities and Challenges , 2010, IEEE Transactions on Industrial Electronics.

[27]  D. Mahinda Vilathgamuwa,et al.  Modeling and Sensorless Direct Torque and Flux Control of a Dual-Airgap Axial Flux Permanent-Magnet Machine With Field-Weakening Operation , 2014, IEEE/ASME Transactions on Mechatronics.

[28]  N. Bianchi,et al.  Air-Gap Flux Density Distortion and Iron Losses in Anisotropic Synchronous Motors , 2010, IEEE Transactions on Magnetics.

[29]  Babak Nahid-Mobarakeh,et al.  Optimal Design of Permanent Magnet Motors to Improve Field-Weakening Performances in Variable Speed Drives , 2012, IEEE Transactions on Industrial Electronics.