Enhanced mechanical properties for 304L stainless steel parts fabricated by laser-foil-printing additive manufacturing

[1]  Ehsan Toyserkani,et al.  A critical review of powder-based additive manufacturing of ferrous alloys: Process parameters, microstructure and mechanical properties , 2018 .

[2]  Wenbin Li,et al.  Catalytic cracking of n-hexane for producing light olefins on 3D-printed monoliths of MFI and FAU zeolites , 2018 .

[3]  Moataz M. Attallah,et al.  Porosity control in 316L stainless steel using cold and hot isostatic pressing , 2018 .

[4]  M. Leu,et al.  Building metallic glass structures on crystalline metal substrates by laser-foil-printing additive manufacturing , 2017 .

[5]  T. L. Yang,et al.  Microstructure and mechanical properties of open-cell porous Ti-6Al-4V fabricated by selective laser melting , 2017 .

[6]  H. Tsai,et al.  3D printing of large, complex metallic glass structures , 2017 .

[7]  C. Chen,et al.  A Foil-Based Additive Manufacturing Technology for Metal Parts , 2017 .

[8]  M. Leu,et al.  3D bioprinting of stem cells and polymer/bioactive glass composite scaffolds for bone tissue engineering , 2017, International journal of bioprinting.

[9]  A. Beese,et al.  Effect of processing parameters on microstructure and tensile properties of austenitic stainless steel 304L made by directed energy deposition additive manufacturing , 2016 .

[10]  J. Farjas,et al.  Measuring thermal conductivity of powders with differential scanning calorimetry , 2016, Journal of Thermal Analysis and Calorimetry.

[11]  T. Mower,et al.  Mechanical behavior of additive manufactured, powder-bed laser-fused materials , 2016 .

[12]  Di Wang,et al.  Investigation into spatter behavior during selective laser melting of AISI 316L stainless steel powder , 2015 .

[13]  Chor Yen Yap,et al.  Review of selective laser melting : materials and applications , 2015 .

[14]  R. Martínez-Sánchez,et al.  Influence of Size on the Microstructure and Mechanical Properties of an AISI 304L Stainless Steel—A Comparison between Bulk and Fibers , 2015, Materials.

[15]  Ian Gibson,et al.  Additive manufacturing technologies : 3D printing, rapid prototyping, and direct digital manufacturing , 2015 .

[16]  Jean-Pierre Kruth,et al.  Influence of SLM on shape memory and compression behaviour of NiTi scaffolds , 2015 .

[17]  Ming Gao,et al.  Effects of processing parameters on tensile properties of selective laser melted 304 stainless steel , 2013 .

[18]  Li Wang,et al.  Balling behavior of stainless steel and nickel powder during selective laser melting process , 2012 .

[19]  K. Lo,et al.  Effect of laser surface melting on intergranular corrosion behaviour of aged austenitic and duplex stainless steels , 2011 .

[20]  J. Kruth,et al.  A study of the microstructural evolution during selective laser melting of Ti–6Al–4V , 2010 .

[21]  J. Berry,et al.  Pore Formation in Laser-Assisted Powder Deposition Process , 2009 .

[22]  G. Levy,et al.  Comparison of density of stainless steel 316 L parts produced with selective laser melting using different powder grades , 2009 .

[23]  David W. Rosen,et al.  Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing , 2009 .

[24]  H. Tsai,et al.  Transport Phenomena and Keyhole Dynamics during Pulsed Laser Welding , 2006 .

[25]  W. Johnson,et al.  Effect of oxygen concentration upon the ductility of amorphous Zr57Nb5Al10Cu15.4Ni12.6 , 2006 .

[26]  Christ Glorieux,et al.  Photopyroelectric measurement of thermal conductivity of metallic powders , 2005 .

[27]  M. Geiger,et al.  Laminated Object Manufacturing of Metal Foil — Process Chain and System Technology , 2005 .

[28]  L. Froyen,et al.  Binding Mechanisms in Selective Laser Sintering and Selective Laser Melting , 2004 .

[29]  Jose Maria Kenny,et al.  Grain refinement strengthening of a micro-crystalline high nitrogen austenitic stainless steel , 2003 .

[30]  J. Planell,et al.  Formation of α-Widmanstätten structure: effects of grain size and cooling rate on the Widmanstätten morphologies and on the mechanical properties in Ti6Al4V alloy , 2001 .

[31]  William E. Frazier,et al.  Qualifying of metallic materials and structures for aerospace applications , 2001 .

[32]  M. L. Griffith,et al.  Understanding the Microstructure and Properties of Components Fabricated by Laser Engineered Net Shaping (LENS) , 2000 .

[33]  R. Graves,et al.  The thermal conductivity of AISI 304L stainless steel , 1991 .

[34]  Clive R. Clayton,et al.  Materials science and engineering: An introduction: by W. D. Callister Jr.; published by Wiley, Chichester, West Sussex, 1985; 602 pp.; price, £40.40 , 1987 .