The combustion efficiency and the gaseous emission of a 100 kWe MGT, designed for working with natural gas but fuelled with blends containing up to 10% of hydrogen is investigated. A critical comparison between experimental data and results of the CFD analysis of the combustor is discussed. The k-epsilon RANS turbulence model and the Finite Rate – Eddy Dissipation combustion model were used in the numerical computations. The chemical kinetic mechanisms embedded were the 2-step Westbrook and Dryer for methane oxidation, 1-step Westbrook and Dryer for hydrogen oxidation and the Zeldovich mechanism for NO formation. The experimental data and numerical computations are in agreement within the experimental accuracy for NO emissions. Regarding CO, there is a significant deviation between experimental and computational data due to the scarce predictive capability of the simple two steps kinetic mechanism was adopted. From a practical point of view, the possibility of using fuels with a similar Wobbe index was confirmed. In particular the addiction of 10 % of hydrogen to pure methane doesn’t affect the behavior of the micro gas turbine either in terms of NO or CO emissions.
[1]
A. Lefebvre,et al.
GAS TURBINE COMBUSTION—Alternative Fuels and Emissions
,
2010
.
[2]
Michele Pinelli,et al.
Analysis of a Micro Gas Turbine Fed by Natural Gas and Synthesis Gas: MGT Test Bench and Combustor CFD Analysis
,
2012
.
[3]
Luigi Pietro Maria Colombo,et al.
Experimentation on a cogenerative system based on a microturbine
,
2006
.
[4]
Svend Bram,et al.
Combustion of syngas in a pressurized microturbine-like combustor: Experimental results
,
2010
.
[5]
Manfred Aigner,et al.
Experimental Characterization of a Micro Gas Turbine Test Rig
,
2010
.
[6]
Fabrizio Reale,et al.
Cycle optimization and combustion analysis in a low-NOx micro-gas turbine
,
2007
.
[7]
Giovanni Lozza,et al.
Using Hydrogen as Gas Turbine Fuel
,
2003
.