A hybrid modulation method for lifetime extension of power semiconductors in wind power converters

Pulse width modulation (PWM) techniques can be classified into continuous pulse width modulation (CPWM) and discontinuous pulse width modulation (DPWM) types. The switching loss of power devices in DPWM converters is lower than that in CPWM converters. Lower loss could reduce the junction temperature fluctuation in converters of wind turbine generator system (WTGS) and may result in longer power devices lifetime. However, employing DPWM scheme under all WTGS operation conditions will lead to power quality concern. To solve this problem, a new hybrid modulation scheme which combines the CPWM and DPWM methods for WTGS converters is presented in this paper. In the presented hybrid modulation method, two modulation schemes are switched back and forth according to the wind speed in the wind farm site. The performance of the presented modulation scheme is verified and compared with that of other PWM schemes through a case study of 1.2 MW WTGS in long-term mission profiles. The results show that the lifetime of power devices with the presented hybrid approach is longer than that with the CPWM, and is shorter than that with the DPWMs. Moreover, the power quality of the power converters with the hybrid modulation scheme can be guaranteed in all operation conditions, which may not be achieved with DPWMs.

[1]  Jorg Roth-Stielow,et al.  Chances and limits of a thermal control for a three-phase voltage source inverter in traction applications using permanent magnet synchronous or induction machines , 2011, Proceedings of the 2011 14th European Conference on Power Electronics and Applications.

[2]  Robert D. Lorenz,et al.  Active thermal control of power electronics modules , 2003 .

[3]  D.A. Murdock,et al.  Active thermal control of power electronic modules , 2003, IEEE Transactions on Industry Applications.

[4]  S. Ghandhi.  Semiconductor power devices , 1977 .

[5]  Xiong Du,et al.  Junction temperature management of IGBT module in power electronic converters , 2014, Microelectron. Reliab..

[6]  A. Morozumi,et al.  Reliability of power cycling for IGBT power semiconductor modules , 2001, Conference Record of the 2001 IEEE Industry Applications Conference. 36th IAS Annual Meeting (Cat. No.01CH37248).

[7]  Istvan Erlich,et al.  Improving the Reactive Power Capability of the DFIG-Based Wind Turbine During Operation Around the Synchronous Speed , 2013, IEEE Transactions on Energy Conversion.

[8]  Lixiang Wei,et al.  Analysis of IGBT power cycling capabilities used in Doubly Fed Induction Generator wind power system , 2010, 2010 IEEE Energy Conversion Congress and Exposition.

[9]  Josef Lutz,et al.  Semiconductor Power Devices , 2011 .

[10]  Josef Lutz,et al.  Model for Power Cycling lifetime of IGBT Modules - various factors influencing lifetime , 2008 .

[11]  Ke Ma.  Thermal " Loading " and " Lifetime " Estimation " for " Power " Device " Considering " Mission " Profiles " in " Wind " Power " Converter " , 2014 .

[12]  Frede Blaabjerg,et al.  Modulation Methods for Neutral-Point-Clamped Wind Power Converter Achieving Loss and Thermal Redistribution Under Low-Voltage Ride-Through , 2014, IEEE Transactions on Industrial Electronics.

[13]  A. Mertens,et al.  Steady state lifetime estimation of the power semiconductors in the rotor side converter of a 2 MW DFIG wind turbine via power cycling capability analysis , 2011, Proceedings of the 2011 14th European Conference on Power Electronics and Applications.

[14]  Dawei Xiang,et al.  An Industry-Based Survey of Reliability in Power Electronic Converters , 2011, IEEE Transactions on Industry Applications.

[15]  J. Lutz,et al.  Semiconductor Power Devices: Physics, Characteristics, Reliability , 2011 .

[16]  Tore Undeland,et al.  A simplified algorithm for predicting power cycling lifetime in Direct Drive wind power systems , 2012, International Multi-Conference on Systems, Sygnals & Devices.

[17]  Gaoxian Li,et al.  Numerical IGBT junction temperature calculation method for lifetime estimation of power semiconductors in the wind power converters , 2014, 2014 International Power Electronics and Application Conference and Exposition.

[18]  Dushan Boroyevich,et al.  Reliability-Oriented Design of Three-Phase Power Converters for Aircraft Applications , 2012, IEEE Transactions on Aerospace and Electronic Systems.