Lead analysis by anti-chelate fluorescence polarization immunoassay.

Lead concentrations were determined by a fluorescence polarization immunoassay (FPIA) method that uses polyclonal antibodies raised against the lead(II) chelate of ethylenediamine-N,N,N',N'-tetraacetic acid (EDTA). The technique is based on competition for a fixed concentration of antibody binding sites between Pb-EDTA, formed by treating the sample with excess EDTA, and a fixed concentration of a fluorescent analogue of the Pb-EDTA complex. The objective was to correlate results obtained by FPIA with those produced by conventional atomic spectroscopy analysis of soils, solid waste leachates (produced by the Toxicity Characteristic Leachate Procedure; TCLP), airborne dust, and drinking water. Linear regression analysis of FPIA results for 138 soil samples containing 0-3094 ppm Pb(II) by flame atomic absorption spectroscopy and 40 TCLP extracts containing 0-668 ppm Pb(II) by inductively coupled plasma atomic emission spectroscopy produced correlation coefficients (r2) of 0.96 and 0.93, respectively. Pilot studies of mineral acid extracts of airborne dust trapped on fiberglass filters and of two sources of drinking water demonstrated the feasibility of also measuring lead in these matrixes by FPIA. The limit of detection under conditions that minimized sample dilution was approximately 1 ppb, and cross reactivity with 15 nontarget metals was below 0.5% in all cases. The methods are simple to perform and are amenable to field testing and mobile laboratory use, allowing timely and cost-effective characterization of suspected sources of lead contamination.