Characterization of the Highly Nonlinear and Anisotropic Vascular Tissues from Experimental Inflation Data: A Validation Study Toward the Use of Clinical Data for In-Vivo Modeling and Analysis

We study whether an inverse modeling approach is applicable for characterizing vascular tissue subjected to various levels of internal pressure and axial stretch that approximate in-vivo conditions. To compensate for the limitation of axial-displacement/pressure/diameter data typical of clinical data, which does not provide information about axial force, we propose to constrain the ratio of axial to circumferential elastic moduli to a typical range. Vessel wall constitutive behavior is modeled with a transversely isotropic hyperelastic equation that accounts for dispersed collagen fibers. A single-layer and a bi-layer approximation to vessel ultrastructure are examined, as is the possibility of obtaining the fiber orientation as part of the optimization. Characterization is validated against independent pipette-aspiration biaxial data on the same samples. It was found that the single-layer model based on homogeneous wall assumption could not reproduce the validation data. In contrast, the constrained bi-layer model was in excellent agreement with both types of experimental data. Due to covariance, estimations of fiber angle were slightly outside of the normal range, which can be resolved by predefining the angles to normal values. Our approach is relatively invariant to a constant or a variable axial response. We believe that it is suitable for in-vivo characterization.

[1]  P. Van Loon Length-force and volume-pressure relationships of arteries. , 1977, Biorheology.

[2]  Douglas C. Montgomery,et al.  Response Surface Methodology: Process and Product Optimization Using Designed Experiments , 1995 .

[3]  I. Vesely,et al.  Computational Modeling of Vascular Clamping: A Step Toward Simulating Surgery , 2005, 2005 IEEE Engineering in Medicine and Biology 27th Annual Conference.

[4]  L. V. von Segesser,et al.  Systolic axial artery length reduction: an overlooked phenomenon in vivo. , 2001, American journal of physiology. Heart and circulatory physiology.

[5]  D A Vorp,et al.  A device for the application of cyclic twist and extension on perfused vascular segments. , 1996, The American journal of physiology.

[6]  K. Takayama,et al.  Computational replicas: anatomic reconstructions of cerebral vessels as volume numerical grids at three-dimensional angiography. , 2004, AJNR. American journal of neuroradiology.

[7]  G. L’italien,et al.  Biaxial elastic properties of rat arteries in vivo: influence of vascular wall cells on anisotropy. , 1994, The American journal of physiology.

[8]  K. Takamizawa,et al.  Strain energy density function and uniform strain hypothesis for arterial mechanics. , 1987, Journal of biomechanics.

[9]  Y Lanir,et al.  Two-dimensional mechanical properties of rabbit skin. I. Experimental system. , 1974, Journal of biomechanics.

[10]  P. Dobrin,et al.  Biaxial anisotropy of dog carotid artery: estimation of circumferential elastic modulus. , 1986, Journal of biomechanics.

[11]  Carsten J. Beller,et al.  Role of Aortic Root Motion in the Pathogenesis of Aortic Dissection , 2004, Circulation.

[12]  Nielen Stander,et al.  On the robustness of a simple domain reduction scheme for simulation‐based optimization , 2002 .

[13]  Ivan Vesely,et al.  Invariant formulation for dispersed transverse isotropy in aortic heart valves , 2005, Biomechanics and modeling in mechanobiology.

[14]  M. Hamada,et al.  Evaluation of Aortic Distensibility in Patients with Essential Hypertension by Using Cine Magnetic Resonance Imaging , 1994, Angiology.

[15]  R. Ogden,et al.  Biomechanics of Soft Tissue in Cardiovascular Systems , 2003 .

[16]  G A Holzapfel,et al.  Determination of constitutive equations for human arteries from clinical data. , 2003, Journal of biomechanics.

[17]  Siegfried Hagl,et al.  Increased aortic wall stress in aortic insufficiency: clinical data and computer model. , 2005, European journal of cardio-thoracic surgery : official journal of the European Association for Cardio-thoracic Surgery.

[18]  S. Hagl,et al.  Are there surgical implications to aortic root motion? , 2005, The Journal of heart valve disease.

[19]  Y C Fung,et al.  The degree of nonlinearity and anisotropy of blood vessel elasticity. , 1997, Proceedings of the National Academy of Sciences of the United States of America.

[20]  Thomas J. R. Hughes,et al.  In vivo validation of a one-dimensional finite-element method for predicting blood flow in cardiovascular bypass grafts , 2003, IEEE Transactions on Biomedical Engineering.

[21]  P Boesiger,et al.  Heart motion adapted cine phase‐contrast flow measurements through the aortic valve , 1999, Magnetic resonance in medicine.

[22]  Giancarlo Pennati,et al.  Pressure Drops in a Distensible Model of End-to-side Anastomosis in Systemic-to-pulmonary Shunts , 2002, Computer methods in biomechanics and biomedical engineering.

[23]  K. Bathe,et al.  A finite element formulation for nonlinear incompressible elastic and inelastic analysis , 1987 .

[24]  Ghassan S Kassab,et al.  Biaxial incremental homeostatic elastic moduli of coronary artery: two-layer model. , 2004, American journal of physiology. Heart and circulatory physiology.

[25]  Gerhard A Holzapfel,et al.  A three-dimensional finite element model for arterial clamping. , 2001, Journal of biomechanical engineering.

[26]  H. W. Weizsäcker,et al.  Isotropy and anisotropy of the arterial wall. , 1988, Journal of biomechanics.

[27]  D. Ku,et al.  Steady flow and wall compression in stenotic arteries: a three-dimensional thick-wall model with fluid-wall interactions. , 2001, Journal of biomechanical engineering.

[28]  Hui Zhu,et al.  Relationship Between the Dynamic Geometry and Wall Thickness of a Human Coronary Artery , 2003, Arteriosclerosis, thrombosis, and vascular biology.

[29]  M. Sacks,et al.  A method to quantify the fiber kinematics of planar tissues under biaxial stretch. , 1997, Journal of biomechanics.

[30]  F. Silver Biological Materials: Structure, Mechanical Properties and Modeling of Soft Tissues , 1987 .

[31]  Charles A. Taylor,et al.  Three-Dimensional Analysis of Renal Artery Bending Motion during Respiration , 2005, Journal of endovascular therapy : an official journal of the International Society of Endovascular Specialists.

[32]  W. von Maltzahn,et al.  Experimental measurements of elastic properties of media and adventitia of bovine carotid arteries. , 1984, Journal of biomechanics.

[33]  A. K. Johnson,et al.  Neural input modulates osmotically stimulated release of vasopressin into the supraoptic nucleus. , 1996, The American journal of physiology.

[34]  Raphael T. Haftka,et al.  Response surface approximations for structural optimization , 1996 .

[35]  M. Sacks Biaxial Mechanical Evaluation of Planar Biological Materials , 2000 .

[36]  J D Humphrey,et al.  Mechanics of the arterial wall: review and directions. , 1995, Critical reviews in biomedical engineering.

[37]  M. H. Friedman,et al.  Dynamics of human coronary arterial motion and its potential role in coronary atherogenesis. , 2000, Journal of biomechanical engineering.

[38]  R. Cook,et al.  Concepts and Applications of Finite Element Analysis , 1974 .

[39]  M. Thubrikar,et al.  Finite element modeling of the thoracic aorta: including aortic root motion to evaluate the risk of aortic dissection , 2008, Journal of medical engineering & technology.

[40]  G. Raffai,et al.  Axial stretching of extremity artery induces reversible hyperpolarization of smooth muscle cell membrane in vivo. , 2001, Acta physiologica Hungarica.

[41]  G. Hodge,et al.  The Basic 'Elements' , 2009 .

[42]  R. Vito,et al.  Sustained Axial Loading Lengthens Arteries in Organ Culture , 2005, Annals of Biomedical Engineering.

[43]  Gerhard A. Holzapfel,et al.  A Layer-Specific Three-Dimensional Model for the Simulation of Balloon Angioplasty using Magnetic Resonance Imaging and Mechanical Testing , 2002, Annals of Biomedical Engineering.

[44]  Michael S Sacks,et al.  Incorporation of experimentally-derived fiber orientation into a structural constitutive model for planar collagenous tissues. , 2003, Journal of biomechanical engineering.

[45]  E. Bradley,et al.  Length-force and volume-pressure relationships of arteries. , 1977 .

[46]  B. Helwig,et al.  Central Tempol alters basal sympathetic nerve discharge and attenuates sympathetic excitation to central ANG II. , 2004, American journal of physiology. Heart and circulatory physiology.

[47]  S. P. Nolan Defining valve performance: importance and difficulties in testing heart valve replacement devices. , 1992, Journal of medical engineering & technology.

[48]  Nielen Stander,et al.  Inverse Parameter Fitting of Biological Tissues: A Response Surface Approach , 2005, Annals of Biomedical Engineering.

[49]  J. D. Humphrey,et al.  Computer-aided vascular experimentation: A new electromechanical test system , 2006, Annals of Biomedical Engineering.

[50]  M. Buonocore,et al.  4D magnetic resonance velocity mapping of blood flow patterns in the aorta in young vs. elderly normal subjects , 1999, Journal of magnetic resonance imaging : JMRI.

[51]  Toshiro Ohashi,et al.  Pipette aspiration technique for the measurement of nonlinear and anisotropic mechanical properties of blood vessel walls under biaxial stretch. , 2005, Journal of biomechanics.

[52]  G. Holzapfel Determination of material models for arterial walls from uniaxial extension tests and histological structure. , 2006, Journal of theoretical biology.

[53]  L. Kollár,et al.  Mechanics of Composite Structures , 2003 .

[54]  S Marakas,et al.  Pressure-diameter relation of the human aorta. A new method of determination by the application of a special ultrasonic dimension catheter. , 1995, Circulation.

[55]  Y Lanir,et al.  Two-dimensional mechanical properties of rabbit skin. II. Experimental results. , 1974, Journal of Biomechanics.

[56]  Wei Sun,et al.  Multiaxial mechanical behavior of biological materials. , 2003, Annual review of biomedical engineering.

[57]  H. W. Weizsäcker,et al.  Analysis of the passive mechanical properties of rat carotid arteries. , 1983, Journal of biomechanics.

[58]  Gerhard Holzapfel,et al.  A procedure to simulate coronary artery bypass graft surgery , 2007, Medical & Biological Engineering & Computing.

[59]  J. Mercer Movement of the aortic annulus. , 1969, The British journal of radiology.

[60]  Nico Westerhof,et al.  Effect of cyclic axial stretch of rat arteries on endothelial cytoskeletal morphology and vascular reactivity. , 2003, Journal of biomechanics.

[61]  O. Smedby,et al.  Gadolinium-enhanced magnetic resonance angiography, digital subtraction angiography and duplex of the iliac arteries compared with intra-arterial pressure gradient measurements. , 2000, European journal of vascular and endovascular surgery : the official journal of the European Society for Vascular Surgery.

[62]  Nielen Stander,et al.  Material identification in structural optimization using response surfaces , 2005 .

[63]  K. Hayashi Mechanical Properties of Soft Tissues and Arterial Walls , 2003 .