A study on wettability and formation of intermetallic phase between Co–Cr–Mo alloy and Sn-Solder used as a potential under bump metallization for flip-chip packages

[1]  Han Huang,et al.  Low-temperature wetting mechanisms of polycrystalline chemical vapour deposition (CVD) diamond by Sn-Ti solder alloys , 2019, Materials & Design.

[2]  Xiaogan Li,et al.  Effect of polycrystalline Cu microstructures on IMC growth behavior at Sn/Cu soldering interface , 2019, Journal of Materials Science: Materials in Electronics.

[3]  Yulong Li,et al.  Theoretical and experimental investigations on mechanical properties of Co1−Ni Sn2 intermetallic compounds , 2019, Results in Physics.

[4]  K. Kanlayasiri,et al.  Effects of Ag contents in Sn–xAg lead-free solders on microstructure, corrosion behavior and interfacial reaction with Cu substrate , 2019, Transactions of Nonferrous Metals Society of China.

[5]  Chao-hong Wang,et al.  Minor P Doping to Effectively Suppress IMC Growth in Solder Joints with Electroplated Co(P) Metallization , 2019, Journal of Electronic Materials.

[6]  Yulong Li,et al.  Mechanical properties of CoSn2 and α-CoSn3 intermetallic compounds: first-principles calculations and nano-indentation measurements , 2019, Applied Physics A.

[7]  A. Haseeb,et al.  Formation and characterization of intermetallic compounds in electroplated cobalt–tin multilayers , 2018, Journal of Materials Science: Materials in Electronics.

[8]  Yunping Li,et al.  Strain-controlled iso-thermal fatigue behavior of Co–29Cr–6Mo used for tooling materials in Al die casting , 2017 .

[9]  C. Gourlay,et al.  Nucleation, grain orientations, and microstructure of Sn-3Ag-0.5Cu soldered on cobalt substrates , 2017 .

[10]  J. Joubert,et al.  Thermodynamic modelling of the Cr-Nb-Sn system , 2017 .

[11]  M. Ollivier,et al.  Nucleation of tin on the Cu6Sn5 layer in electronic interconnections , 2017 .

[12]  C. Du,et al.  Effect of bonding time on the microstructure and mechanical properties of Co/Sn/Cu joint , 2017, Journal of Materials Science: Materials in Electronics.

[13]  R. Koleňák,et al.  Wettability of Selected Lead-Free Solders for Higher Application Temperatures , 2016 .

[14]  Yunping Li,et al.  Influences of alloyed Si on the corrosion resistance of Co–Cr–Mo alloy to molten Al by iso-thermal oxidation in air , 2015 .

[15]  Yunping Li,et al.  Effects of alloyed Si on the oxidation behaviour of Co–29Cr–6Mo alloy for solid-oxide fuel cell interconnects , 2015 .

[16]  Eric Beyne,et al.  Formation, processing and characterization of Co-Sn intermetallic compounds for potential integration in 3D interconnects , 2015 .

[17]  Chao-hong Wang,et al.  Peltier effect on CoSn3 growth in Sn/Co/Sn couples with different substrate lengths , 2015 .

[18]  Soon-Jae Lee,et al.  Effect of Soldering Temperature on Wetting and Optical Density of Dip Coated Sn and Sn-3.5Ag Solders , 2015 .

[19]  S. Said,et al.  Wetting Characteristics of Al-containing Sn-1Ag-0.5Cu Solder Alloy on Cu Substrate using Wetting Balance and Spread area Methods , 2015 .

[20]  S. Mudry,et al.  Structural studies of liquid Co–Sn alloys , 2014, Journal of alloys and compounds.

[21]  Yunping Li,et al.  Thermo-mechanical fatigue test of a wrought Co-based alloy as potential tooling material for die casting , 2014 .

[22]  A. Chiba,et al.  Influence of carbon addition on mechanical properties and microstructures of Ni-free Co-Cr-W alloys subjected to thermomechanical processing. , 2014, Journal of the mechanical behavior of biomedical materials.

[23]  O. Minho,et al.  Kinetics of Solid-State Reactive Diffusion between Au and Al , 2014 .

[24]  Yunping Li,et al.  Effects of Al, Ti, and Zr doping on oxide film formation in Co–29Cr–6Mo alloy used as mould material for Al die-casting , 2014 .

[25]  Yunping Li,et al.  Corrosion behaviour of CoCrMo alloys in 2 wt% sulphuric acid solution , 2014 .

[26]  Yunping Li,et al.  Effect of nitriding treatment on corrosion behaviour of Co–Cr–Mo alloy in liquid Al , 2014 .

[27]  O. Minho,et al.  Kinetics of Solid-State Reactive Diffusion between Co and Sn , 2014 .

[28]  Yunping Li,et al.  Interfacial reaction between Co–Cr–Mo alloy and liquid Al , 2013 .

[29]  Yunping Li,et al.  Experimental and theoretical research on interfacial reaction of solid Co with liquid Al , 2013 .

[30]  Chao-hong Wang,et al.  Temperature effects on liquid-state Sn/Co interfacial reactions , 2013 .

[31]  Yunping Li,et al.  Interfacial reactions of solid Co and solid Fe with liquid Al , 2012 .

[32]  Suyalatu,et al.  Effects of chromium and nitrogen content on the microstructures and mechanical properties of as-cast Co-Cr-Mo alloys for dental applications. , 2012, Acta biomaterialia.

[33]  B. Predel.  Co - Sn (Cobalt - Tin) , 2012 .

[34]  Yunping Li,et al.  Interfacial reactions between molten Al and a Co–Cr–Mo alloy with and without oxidation treatment , 2011 .

[35]  Chao-hong Wang,et al.  Growth kinetics of the solid-state interfacial reactions in the Sn–Cu/Co and Sn/Co–Cu couples , 2011 .

[36]  Giles Humpston,et al.  Cobalt: a universal barrier metal for solderable under bump metallisations , 2010 .

[37]  I. Kaban,et al.  Experimental study of density, surface tension, and contact angle of Sn–Sb-based alloys for high temperature soldering , 2010 .

[38]  Zhang-fu Yuan,et al.  Wettability of molten Sn–Bi–Cu solder on Cu substrate , 2009 .

[39]  K. A. Meleshevich,et al.  Interfacial interaction of solid cobalt with liquid Pb-free Sn–Bi–In–Zn–Sb soldering alloys , 2009 .

[40]  G. Borzone,et al.  Wetting behaviour of lead-free Sn-based alloys on Cu and Ni substrates , 2008 .

[41]  H. Nishikawa,et al.  Characterization of Co–Sn intermetallic compounds in Sn–3.0Ag–0.5Cu–0.5Co lead-free solder alloy , 2008 .

[42]  Wenjun Zhu,et al.  Formation of intermetallic compound (IMC) between Sn and Co substrate , 2008 .

[43]  Chih-chi Chen,et al.  Sn/Ni–Co solid/solid interfacial reactions , 2008 .

[44]  M. Metikoš-huković,et al.  Passivation and corrosion behaviours of cobalt and cobalt–chromium–molybdenum alloy , 2007 .

[45]  J. Gachon,et al.  Calorimetric and phase diagram studies of the Co–Sn system , 2007 .

[46]  Zhanpeng Jin,et al.  The interfacial reaction between Sn–Ag alloys and Co substrate , 2007 .

[47]  R. Fournelle,et al.  Intermetallic growth kinetics for Sn-Ag, Sn-Cu, and Sn-Ag-Cu lead-free solders on Cu, Ni, and Fe-42Ni substrates , 2006 .

[48]  P. Choi,et al.  The Behavior of CoSn and CoIn2 Intermetallic Compounds upon Mechanical Milling , 2005 .

[49]  L. Magagnin,et al.  Electroless Co–P for diffusion barrier in Pb-free soldering , 2005 .

[50]  E. Beyne,et al.  Comparison of a Cu UBM versus a Co UBM for Sn Flip-Chip Bumps , 2005, Proceedings Electronic Components and Technology, 2005. ECTC '05..

[51]  K. P. Gupta.  The Co-Cr-Mo (Cobalt-Chromium-Molybdenum) System , 2005 .

[52]  E. Beyne,et al.  Nanohardness study of CoSn/sub 2/ intermetallic layers formed between CO UBM and Sn flip-chip solder joints , 2004, Proceedings of 6th Electronics Packaging Technology Conference (EPTC 2004) (IEEE Cat. No.04EX971).

[53]  Johan Liu,et al.  Thermodynamic assessment of the Sn-Co lead-free solder system , 2004 .

[54]  K. Ishida,et al.  A thermodynamic assessment of the Co–Sn system , 2004 .

[55]  Richard P. Vinci,et al.  Nanoindentation measurements on Cu–Sn and Ag–Sn intermetallics formed in Pb-free solder joints , 2003 .

[56]  R. A. Fournelle,et al.  Copper substrate dissolution in eutectic Sn-Ag solder and its effect on microstructure , 2000 .

[57]  H. Okamoto.  Co−Sn (Cobalt-Tin) , 1993 .

[58]  K. Ishida,et al.  The Co-Sn (Cobalt-Tin) System , 1991 .

[59]  M. Venkatraman,et al.  The Cr−Sn (Chromium-Tin) system , 1988 .

[60]  L. Brewer,et al.  The Mo-SN (Molybdenum-Tin) system , 1980 .