In-situ quantification of solid oxide fuel cell electrode microstructure by electrochemical impedance spectroscopy

Abstract Three-dimensional (3D) microstructure of solid oxide fuel cell electrodes plays critical roles in determining fuel cell performance. The state-of-the-art quantification technique such as X-ray computed tomography enables direct calculation of geometric factors by 3D microstructure reconstruction. Taking advantages of in-situ, fast-responding and low cost, electrochemical impedance spectroscopy represented by distribution of relaxation time (DRT) is a novel technique to estimate geometric properties of fuel cell electrodes. In this study, we employed the anode supported cells with the cell configuration of Ni-YSZ || YSZ || LSM-YSZ as an example and compared the tortuosity factor of pores of the anode substrate layer by X-ray computed tomography and DRT analysis. Good agreement was found, validating the feasibility of in-situ microstructural quantification by using the DRT technique.

[1]  M. Ni,et al.  On the tortuosity factor of solid phase in solid oxide fuel cell electrodes , 2015 .

[2]  Mark E. Orazem,et al.  On the Application of the Kramers‐Kronig Relations to Evaluate the Consistency of Electrochemical Impedance Data , 1991 .

[3]  Ellen Ivers-Tiffée,et al.  Evaluation and Modeling of the Cell Resistance in Anode-Supported Solid Oxide Fuel Cells , 2008 .

[4]  M. Ni,et al.  Simulation of sintering kinetics and microstructure evolution of composite solid oxide fuel cells electrodes , 2012 .

[5]  Jon M. Hiller,et al.  Three-dimensional reconstruction of a solid-oxide fuel-cell anode , 2006, Nature materials.

[6]  Norbert H. Menzler,et al.  Degradation of anode supported cell (ASC) performance by Cr-poisoning , 2011 .

[7]  E. Ivers-Tiffée,et al.  Detailed Electrochemical Study on Nanoscaled La0.6Sr0.4CoO3-δ SOFC Thin-Film Cathodes in Dry, Humid and CO2-Containing Atmospheres , 2013 .

[8]  Raymond M. Fuoss,et al.  Electrical Properties of Solids. VIII. Dipole Moments in Polyvinyl Chloride-Diphenyl Systems* , 1941 .

[9]  Ping Liu,et al.  Promotion of water-mediated carbon removal by nanostructured barium oxide/nickel interfaces in solid oxide fuel cells , 2011, Nature communications.

[10]  Dong Ding,et al.  Efficient Electro‐Catalysts for Enhancing Surface Activity and Stability of SOFC Cathodes , 2013 .

[11]  Meng Ni,et al.  Modeling of SOFC running on partially pre-reformed gas mixture , 2012 .

[12]  Siwei Wang,et al.  Low temperature solid oxide fuel cells with hierarchically porous cathode nano-network , 2014 .

[13]  William M. Harris,et al.  Nondestructive volumetric 3-D chemical mapping of nickel-sulfur compounds at the nanoscale. , 2012, Nanoscale.

[14]  L. Pisani Multi-component gas mixture diffusion through porous media: A 1D analytical solution , 2008 .

[15]  Jeffrey W. Fergus,et al.  Solid Oxide Fuel Cells : Materials Properties and Performance , 2016 .

[16]  N. Otsu A threshold selection method from gray level histograms , 1979 .

[17]  Zongping Shao,et al.  Advanced synthesis of materials for intermediate-temperature solid oxide fuel cells , 2012 .

[18]  San Ping Jiang,et al.  Nanoscale and nano-structured electrodes of solid oxide fuel cells by infiltration: Advances and challenges , 2012 .

[19]  Jon G. Pharoah,et al.  Computation of TPB length, surface area and pore size from numerical reconstruction of composite solid oxide fuel cell electrodes , 2009 .

[20]  F. Chen,et al.  High performance low temperature solid oxide fuel cells with novel electrode architecture , 2012 .

[21]  Meilin Liu,et al.  Enhancing SOFC cathode performance by surface modification through infiltration , 2014 .

[22]  Tingshuai Li,et al.  Novel functionally graded acicular electrode for solid oxide cells fabricated by the freeze-tape-casting process , 2012 .

[23]  H. Schichlein,et al.  Deconvolution of electrochemical impedance spectra for the identification of electrode reaction mechanisms in solid oxide fuel cells , 2002 .

[24]  William M. Harris,et al.  Characterization of 3D interconnected microstructural network in mixed ionic and electronic conducting ceramic composites. , 2014, Nanoscale.

[25]  Su-Moon Park,et al.  Unified Model for Transient Faradaic Impedance Spectroscopy: Theory and Prediction , 2012 .

[26]  Lei Zhang,et al.  Quantitative analysis of micro structural and conductivity evolution of Ni-YSZ anodes during thermal , 2011 .

[27]  E. Ivers-Tiffée,et al.  Impedance Study of Alternative ( La , Sr ) FeO3 − δ and ( La , Sr ) ( Co , Fe ) O3 − δ MIEC Cathode Compositions , 2010 .

[28]  F. Chen,et al.  Hierarchically oriented macroporous anode-supported solid oxide fuel cell with thin ceria electrolyte film. , 2014, ACS applied materials & interfaces.