A new flexible high-resolution vision sensor for tool condition monitoring

Abstract From a critical review of defect morphology and image analysis techniques from the literature it seems that a method to recognise any kind of defect and the algorithms to measure all wear types are not available. This article is divided into two main parts: (i) a possible exhaustive classification of defects in cutting inserts and (ii) the design of an automated sensor to recognise defects and to measure wear. The morphology characterisation has led to the definition of a limited number of classes and recognition criteria that occur for different types of cutting materials and working conditions for milling and turning operations. They represent the main requirements of recognition and measurement algorithms. The global logic flow for decision making is also provided. The sensor configuration is outlined with the necessary views and lighting devices. The identification of the worn out areas is performed by software segmentation to detect the texture differences between damaged and undamaged zones and has been tested on different types of carbide inserts. A resolution enhancement method is also proposed.

[1]  Santanu Das,et al.  3D tool wear measurement and visualisation using stereo imaging , 1997 .

[2]  V. C. Venkatesh,et al.  A Discussion on Tool Life Criteria and Total Failure Causes , 1980 .

[3]  F Giusti,et al.  On-Line Sensing of Flank and Crater Wear of Cutting Tools , 1987 .

[4]  M. A. El Baradie,et al.  A fuzzy logic model for machining data selection , 1997 .

[5]  W. König,et al.  New Approaches to Characterizing the Performance of Coated Cutting Tools , 1992 .

[6]  Ichiro Inasaki,et al.  Tool Condition Monitoring (TCM) — The Status of Research and Industrial Application , 1995 .

[7]  Colin Bradley,et al.  A machine vision system for tool wear assessment , 1997 .

[8]  S. Hanasaki,et al.  Tool Wear of Coated Tools when Machining a High Nickel Alloy , 1990 .

[9]  A. Ber,et al.  New Approach of Cutting Tool Materials — CERMET (Titanium Carbonitride-Based Material) for Machining Steels , 1990 .

[10]  C. Borsellino,et al.  Minor Cutting Edge Wear in Finish Turning Operations , 1999 .

[11]  Kjeld Bruno Pedersen,et al.  Wear measurement of cutting tools by computer vision , 1990 .

[12]  A. Yamamoto,et al.  Measurement of the geometric features of a cutting tool edge with the aid of a digital image processing technique , 1989 .

[13]  Yong H. Lee,et al.  Analysis of light strip images on cutting tools to extract 3D wear information , 1994, Optics & Photonics.

[14]  H. Chandrasekaran,et al.  Chip Flow and Notch Wear Mechanisms during the Machining of High Austenitic Stainless Steels , 1994 .

[15]  N. H. Cook,et al.  Tool Wear and Tool Life , 1973 .

[16]  Hans Kurt Tönshoff,et al.  Wear Characteristics of Cermet Cutting Tools , 1994 .

[17]  Behnam Bahr,et al.  Automated tool monitoring system using vision system for a robotic cell , 1993 .

[18]  T. D. Doiron,et al.  Computer vision based station for tool setting and tool form measurement , 1989 .

[19]  Toshio Sata,et al.  Study on Tool Failure of Carbide Tools in Interrupted Turning , 1980 .

[20]  Ju-Hyun Jeon,et al.  Optical flank wear monitoring of cutting tools by image processing , 1988 .

[21]  G. E. D'Errico,et al.  A study of cermets' wear behaviour , 1997 .

[22]  A. Galip Ulsoy,et al.  On-Line Flank Wear Estimation Using an Adaptive Observer and Computer Vision, Part 1: Theory , 1993 .

[23]  C. Borsellino,et al.  A new on-line roughness control in finish turning operation , 1996 .

[24]  G. D'Errico,et al.  Tool Image Processing With Applications To Unmanned Metal-Cutting. A Computer Vision System For Wear Sensing And Failure Detection. , 1987, Other Conferences.

[25]  I. S. Jawahir,et al.  An investigation of the effects of chip flow on tool-wear in machining with complex grooved tools , 1995 .

[26]  R. Teti.  A review of tool condition monitoring literature data base , 1995 .

[27]  F Giusti,et al.  A Flexible Tool Wear Sensor for NC Lathes , 1984 .

[28]  Nobushige Sawai,et al.  AUTOMATED MEASUREMENT OF TOOL WEAR USING AN IMAGE PROCESSING SYSTEM , 1995 .

[29]  Giovanni Tantussi,et al.  VISION SYSTEM CALIBRATION AND SUB-PIXEL MEASUREMENT OF MECHANICAL PARTS , 1999 .

[30]  W. König,et al.  Wear mechanisms of ultrahard, non-metallic cutting materials , 1993 .

[31]  Kazuaki Iwata,et al.  Estimation of Cutting Tool Life by Processing Tool Image Data with Neural Network , 1993 .

[32]  G. Rutelli,et al.  Development of Wear Sensor for Tool Management System , 1988 .

[33]  P. X. Li,et al.  A New Parametric Approach for the Assessment of Comprehensive Tool Wear in Coated Grooved Tools , 1995 .