Multi-channel peristaltic pump for microfluidic applications featuring monolithic PDMS inlay.

The design, fabrication and characterization of a miniaturized, mechanically-actuated 12-channel peristaltic pump for microfluidic applications and built from simple, low-cost materials and fabrication methods is presented. Two pump configurations are tested, including one which reduces pulsating flow. Both use a monolithic PDMS pumping inlay featuring three-dimensional geometries favourable to pumping applications and 12 wholly integrated circular channels. Flow rates in the sub-microL min(-1) to microL min(-1) range were obtained. Channel-to-channel flow rate variability was comparable to a commercial pumping system at lower flow rates. The small footprint, 40 mm by 80 mm, of the micropump renders it portable, and allows its use on microscope stages adjacent to microfluidic devices, thus reducing system dead volumes. The micropump's design allows potential use in remote and resource-limited locations.

[1]  Martin Dufva,et al.  Interconnection blocks: a method for providing reusable, rapid, multiple, aligned and planar microfluidic interconnections , 2009 .

[2]  Shuichi Takayama,et al.  Handheld recirculation system and customized media for microfluidic cell culture. , 2006, Lab on a chip.

[3]  D. Beebe,et al.  Physics and applications of microfluidics in biology. , 2002, Annual review of biomedical engineering.

[4]  Shuichi Takayama,et al.  Small volume low mechanical stress cytometry using computer-controlled Braille display microfluidics. , 2007, Lab on a chip.

[5]  Nam-Trung Nguyen,et al.  MEMS-Micropumps: A Review , 2002 .

[6]  Catherine Situma,et al.  Merging microfluidics with microarray-based bioassays. , 2006, Biomolecular engineering.

[7]  Bruce K. Gale,et al.  Determining the optimal PDMS–PDMS bonding technique for microfluidic devices , 2008 .

[8]  P. Yager,et al.  Point-of-care diagnostics for global health. , 2008, Annual review of biomedical engineering.

[9]  Roller-type squeezing pump with picoliter handling capability , 2003 .

[10]  G. Whitesides.  The origins and the future of microfluidics , 2006, Nature.

[11]  Michael Stangegaard,et al.  A biocompatible micro cell culture chamber (microCCC) for the culturing and on-line monitoring of eukaryote cells. , 2006, Lab on a chip.

[12]  Vincent T. Remcho,et al.  PDMS and tubing-based peristaltic micropumps with direct actuation , 2009 .

[13]  Juan G. Santiago,et al.  A review of micropumps , 2004 .

[14]  Shuichi Takayama,et al.  Computerized microfluidic cell culture using elastomeric channels and Braille displays. , 2004, Proceedings of the National Academy of Sciences of the United States of America.

[15]  S. Quake,et al.  Monolithic microfabricated valves and pumps by multilayer soft lithography. , 2000, Science.

[16]  Levent Yobas,et al.  A disposable planar peristaltic pump for lab-on-a-chip. , 2008, Lab on a chip.

[17]  Suresh V. Garimella,et al.  Recent advances in microscale pumping technologies: a review and evaluation , 2008 .

[18]  Ian Papautsky,et al.  Re-usable quick-release interconnect for characterization of microfluidic systems , 2006 .

[19]  D. Snakenborg,et al.  Multi-stringency wash of partially hybridized 60-mer probes reveals that the stringency along the probe decreases with distance from the microarray surface , 2008, Nucleic acids research.