Miniaturized via-less ultra-wideband bandpass filter based on CRLH-TL unit cell

In this paper, a new via-less ultra-wideband (UWB) bandpass filter design based on a composite right/left-handed transmission line (CRLH-TL) unit cell is presented. Microstrip capacitive patch is used to provide virtual ground and replace the via in the conventional CRLH TL. Via fabrication complexity can be avoided for large-scale and cost-effective production by using microstrip patch. By cascading the interdigital coupled line with a low-pass filter (LPF) based on symmetrical split ring resonator (SSRR) defected ground structure (DGS), an UWB frequency response is achieved. SSRR DGS was used to obtain wider upper-stopband and sharp roll-off rate. The filter has compact size (15.6 × 13 mm2) and exhibits a rejection level greater than 20 dB at both upper and lower stopband. The filter has an insertion loss of 0.9 dB, a return loss better than 14 dB, and a fractional bandwidth of more than 100% at center frequency of 6.8 GHz.

[1]  Rui Li,et al.  Compact UWB Bandpass Filter Using , 2007 .

[2]  Linsheng Wu,et al.  An Ultra-Wideband Balanced Bandpass Filter Based on Defected Ground Structures , 2012 .

[3]  Fu-Chieh Hsu,et al.  Microstrip bandpass filters for Ultra-Wideband (UWB) wireless communications , 2005, IEEE MTT-S International Microwave Symposium Digest, 2005..

[4]  Xiao-Qun Chen,et al.  DGS-Based Resonators Form Lowpass Filters , 2009 .

[5]  M. Kasal,et al.  Design of Microstrip Lowpass Filter Using Defected Ground Structure , 2007, 2007 17th International Conference Radioelektronika.

[6]  M. S. Razalli,et al.  “Via-Less” UWB Filter Using Patched Microstrip Stubs , 2009 .

[8]  Sungtek Kahng,et al.  Design of the UWB bandPass filter based on the 1 cell of microstrip CRLH-TL , 2008, 2008 International Conference on Microwave and Millimeter Wave Technology.