Developments in the fabrication and performance of high-quality HgCdTe detectors grown on 4-in. Si substrates

We are continuing to develop our growth and processing capabilities for HgCdTe grown on 4-in. Si substrates by molecular beam epitaxy (MBE). Both short-wave and mid-wave infrared (SWIR and MWIR) double-layer hetero-junctions (DLHJs) have been fabricated. In order to improve the producibility of the material, we have implemented an in-situ growth composition-control system. We have explored dry etching the HgCdTe/Si wafers and seen promising results. No induced damage was observed in these samples. Detector results show that the HgCdTe/Si devices are state-of-the-art, following the diffusion-limited trend line established by other HgCdTe technologies. Focal-plane array (FPA) testing has been performed in order to assess the material over large areas. The FPA configurations range from 128×128 to 1,024×1,024, with unit cells as small as 20 µm. The MWIR responsivity and NEDT values are comparable to those of existing InSb FPAs. Pixel operabilities well in excess of 99% have been measured. We have also explored the role of growth macrodefects on diode performance and related their impact to FPA operability. The SWIR HgCdTe/Si shows similar results to the MWIR material. Short-wave IR FPA, median dark-current values of less than 0.1 e−/sec have been achieved.