Effects of Substratum Topography on Bacterial Adhesion.

The effect of substratum topography on bacterial surface colonization was studied using a chemically homogeneous silicon coupon. "Grooves" 10 µm deep and 10, 20, 30, and 40 µm wide were etched on the coupon perpendicular to the direction of flow. Flow (Re = 5.5) of a bacterial suspension (10(8) cells/ml) was directed through a parallel plate flow chamber inverted on a confocal microscope. Images were collected in real time to obtain rate and endpoint colonization data for each of three strains of bacteria: Pseudomonas aeruginosa and motile and nonmotile Pseudomonas fluorescens. A higher velocity experiment (Re = 16.6) and an abiotic control using hydrophilic, negatively charged microspheres were also performed. Using a colloidal deposition expression, the initial rates of attachment were compared. P. aeruginosa attached at a higher rate than P. fluorescens mot+ which attached at a higher rate than P. fluorescens mot-. For all bacteria the rate was independent of groove size and was greatest on the downstream edges of the grooves. Only the motile organisms were found in the bottoms of the grooves. A higher fluid velocity resulted in an increase in the initial rate of attachment. In contrast, there was no adhesion of the beads. Attachment of the bacteria appears to be predominated by transport from the bulk phase to the substratum. Copyright 1998 Academic Press.

[1]  L. Melo,et al.  Biofilms--science and technology , 1992 .

[2]  Norman Epstein,et al.  Fine particle deposition in smooth parallel-plate channels , 1979 .

[3]  Robert Franz Mueller,et al.  Bacterial transport and colonization in low nutrient environments , 1996 .

[4]  E. Bourget,et al.  Influence of substratum heterogeneity and settled barnacle density on the settlement of cypris larvae , 1988 .

[5]  J. Holah,et al.  The influence of substratum properties on the attachment of bacterial cells , 1995 .

[6]  E. Idziak,et al.  Role of flagella in adhesion of Pseudomonas fluorescens to tendon slices , 1991, Applied and environmental microbiology.

[7]  A. Camper,et al.  Effects of Motility and Adsorption Rate Coefficient on Transport of Bacteria through Saturated Porous Media , 1993, Applied and environmental microbiology.

[8]  Karsten Pedersen,et al.  Biofilm development on stainless steel and PVC surfaces in drinking water , 1990 .

[9]  Richard E. Ewing,et al.  Two‐dimensional modeling of microscale transport and biotransformation in porous media , 1994 .

[10]  W. R. Smythe Static and Dynamic Electricity , 1989 .

[11]  T. Huff,et al.  The effect of microstructure on microbiologically influenced corrosion , 1993 .

[12]  Evaluation of a coupled mass transport-biofilm process model using dissolved oxygen microsensors , 1995 .

[13]  Paul Rouxhet,et al.  STRUCTURAL AND PHYSICOCHEMICAL SURFACE-PROPERTIES OF SERRATIA-MARCESCENS STRAINS , 1992 .

[14]  H. Busscher,et al.  The influence of ionic strength and pH on diffusion of micro-organisms with different structural surface features , 1994 .

[15]  H. Busscher,et al.  Simultaneous monitoring of the adsorption and desorption of colloidal particles during deposition in a parallel plate flow chamber , 1992 .

[16]  Mel Rosenberg,et al.  Microbial cell surface hydrophobicity , 1990 .

[17]  H. C. van der Mei,et al.  Physico-chemical and structural properties of the surfaces of Peptostreptococcus micros and Streptococcus mitis as compared to those of mutans streptococci, Streptococcus sanguis and Streptococcus salivarius. , 1992, Journal of general microbiology.

[18]  W. G. Characklis,et al.  Characterization of initial events in bacterial surface colonization by two Pseudomonas species using image analysis , 1992, Biotechnology and bioengineering.

[19]  M. Quirynen,et al.  Physico-chemical properties of oral streptococcal cell surfaces and their relation with adhesion to solid substrata in vitro and in vivo , 1989 .

[20]  H. Busscher,et al.  THE INFLUENCE OF COLLECTOR AND BACTERIAL-CELL SURFACE-PROPERTIES ON THE DEPOSITION OF ORAL STREPTOCOCCI IN A PARALLEL PLATE FLOW CELL , 1990 .

[21]  J. Remon,et al.  Kinetics of Pseudomonas aeruginosa adhesion to 304 and 316-L stainless steel: role of cell surface hydrophobicity , 1990, Applied and environmental microbiology.

[22]  H. Busscher,et al.  DEPOSITION OF POLYSTYRENE PARTICLES IN A PARALLEL PLATE FLOW CELL .1. THE INFLUENCE OF COLLECTOR SURFACE-PROPERTIES ON THE EXPERIMENTAL DEPOSITION RATE , 1990 .

[23]  H. C. van der Mei,et al.  Heterogeneity of Surfaces of Subgingival Bacteria as Detected by Zeta Potential Measurements , 1992, Journal of dental research.

[24]  Robert A. Bloodgood,et al.  Hydrophobicity, Adhesion, and Surface-Exposed Proteins of Gliding Bacteria , 1991, Applied and environmental microbiology.

[25]  H. Busscher,et al.  EXPERIMENTAL APPROACHES FOR STUDYING ADHESION OF MICROORGANISMS TO SOLID SUBSTRATA - APPLICATIONS AND MASS-TRANSPORT , 1989 .

[26]  J. Sjollema,et al.  REAL-TIME ENUMERATION OF ADHERING MICROORGANISMS IN A PARALLEL PLATE FLOW CELL USING AUTOMATED IMAGE-ANALYSIS , 1989 .