Microstructure of alumina compact body made by slip casting

[1]  K. Uematsu,et al.  Morphological Changes in Process-Related Large Pores of Granular Compacted and Sintered Alumina , 2004 .

[2]  H. Kamiya,et al.  Contribution of particle structure to the viscosity of SiO2 particle-filled epoxy resin composite systems , 2001 .

[3]  K. Uematsu,et al.  Processing defects and their relevance to strength in alumina ceramics made by slip casting , 2000 .

[4]  M. Naito,et al.  Particle Aggregated Structure in Silica Particle Filled Epoxy Resin Composite System , 2000 .

[5]  M. Sando,et al.  Book reviewAdvances in Process Measurements for the Ceramics IndustryA. JILLAVENKATESA and G. Y. ONODA (Eds), The American Ceramics Society (1999) ISBN 1-57498-086-6. US$ 90.00 (397 pp.) , 2000 .

[6]  E. Usui,et al.  The effect of silane agent on tensile and bending properties of silica‐filled epoxy after water absorption by boiling , 1999 .

[7]  K. Uematsu,et al.  Formation mechanisms of processing defects and their relevance to the strength in alumina ceramics made by powder compaction process , 1999 .

[8]  Minoru Takahashi,et al.  The Adsorption Behavior of Dispersant Molecules and Rheological Properties of Highly Concentrated Alumina Slurries. , 1998 .

[9]  J. Ferreira.  Role of the clogging effect in the slip casting process , 1998 .

[10]  E. Usui,et al.  The effect of silane agent on tensile and bending properties of silica filled epoxy after water absorption by boiling , 1997 .

[11]  H. Kamiya,et al.  Optimization of suspension characteristics for shaping processes , 1997 .

[12]  J. Rödel,et al.  Reliability of alumina ceramics. 2: Effect of processing , 1997 .

[13]  K. Uematsu.  Immersion microscopy for detailed characterization of defects in ceramic powders and green bodies , 1996 .

[14]  T. Gupta,et al.  Principles of the development of a silica dielectric for microelectronics packaging , 1996 .

[15]  K. Söderholm,et al.  Work of adhesion influence on the rheological properties of silica filled polymer composites , 1995 .

[16]  T. Coyle,et al.  Effects of Organotitanate Additions on the Dispersion of Aluminum Nitride in Nonpolar Solvents , 1995 .

[17]  J. Brady.  The rheological behavior of concentrated colloidal dispersions , 1993 .

[18]  B. Ryu,et al.  Rheological Characteristics of Aqueous Alumina Slurry for Tape Casting , 1993 .

[19]  M. Inoue,et al.  Effect of processing conditions on the characteristics of pores in hot isostatically pressed alumina , 1993, Journal of Materials Science.

[20]  K. Uematsu,et al.  Direct Study of the Behavior of Flaw‐Forming Defect in Sintering , 1992 .

[21]  K. Kitajima,et al.  Burn-out of Binder and Sintering Behavior of Powder Compacts of Bimodally Distributed Alumina Powders with Stearic Acid and Polyethleneglycol , 1991 .

[22]  M. Janney,et al.  Gelcasting of Alumina , 1991 .

[23]  F. Lange,et al.  Powder Processing Science and Technology for Increased Reliability , 1989 .

[24]  R. Morrell,et al.  Textures in high-alumina engineering ceramics , 1986 .

[25]  Anthony G. Evans,et al.  Structural Reliability:A Processing‐Dependent Phenomenon , 1982 .

[26]  Nobuhiko Watanabe.  Studies on Slip Casting Control III , 1972 .