Integrated Solid Oxide Fuel Cell Systems for Electrical Power Generation—A Review

[1]  Dennis Y.C. Leung,et al.  A review of biomass-derived fuel processors for fuel cell systems , 2009 .

[2]  Lars Sjunnesson,et al.  Combined solid oxide fuel cell and gas turbine systems for efficient power and heat generation , 2000 .

[3]  S. D. Kim,et al.  Hydrogen production from two-step steam methane reforming in a fluidized bed reactor , 2009 .

[4]  Richard Fellows.  A novel configuration for direct internal reforming stacks , 1998 .

[5]  G. E. Voecks,et al.  Autothermal reforming of aliphatic and aromatic hydrocarbon liquids , 1983 .

[6]  Robert C. Brown,et al.  Enhanced hydrogen production from indirectly heated, gasified biomass, and removal of carbon gas emissions using a novel biological gas reformer , 2004 .

[7]  G. S. Samuelsen,et al.  Power and temperature control of fluctuating biomass gas fueled solid oxide fuel cell and micro gas turbine hybrid system , 2006 .

[8]  Alberto Traverso,et al.  Influence of the anodic recirculation transient behaviour on the SOFC hybrid system performance , 2005 .

[9]  W. Kiatkittipong,et al.  Performance of Membrane-Assisted Solid Oxide Fuel Cell System Fuelled by Bioethanol , 2011 .

[10]  Russell F Dunn,et al.  Using process integration technology for CLEANER production , 2001 .

[11]  Robert F. Savinell,et al.  Kinetics of methanol-steam reformation in an internal reforming fuel cell , 2002 .

[12]  H. H. Erdem,et al.  An analysis of SOFC/GT CHP system based on exergetic performance criteria , 2008 .

[13]  Emmanuel Kakaras,et al.  High temperature solid oxide fuel cell integrated with novel allothermal biomass gasification: Part I: Modelling and feasibility study , 2006 .

[14]  Nigel P. Brandon,et al.  Optimal integration strategies for a syngas fuelled SOFC and gas turbine hybrid , 2011 .

[15]  Ibrahim Dincer,et al.  Exergoeconomic analysis of a hybrid system based on steam biomass gasification products for hydrogen , 2011 .

[16]  François Maréchal,et al.  Optimization of a fuel cell system using process integration techniques , 2003 .

[17]  Calin-Cristian Cormos,et al.  Hydrogen production from fossil fuels with carbon capture and storage based on chemical looping systems , 2011 .

[18]  N. Woudstra,et al.  Alternative system designs of biomass gasification SOFC/GT hybrid systems , 2011 .

[19]  Ienwhei Chen,et al.  Resistivity to sulfur poisoning of nickel-alumina catalysts , 1988 .

[20]  Detlef Stolten,et al.  Small-scale testing of a precious metal catalyst in the autothermal reforming of various hydrocarbon feeds , 2002 .

[21]  Tong Seop Kim,et al.  Comparison between pressurized design and ambient pressure design of hybrid solid oxide fuel cell–gas turbine systems , 2006 .

[22]  S. Tosti,et al.  Long-term tests of Pd-Ag thin wall permeator tube , 2006 .

[23]  S. Kjelstrup,et al.  Minimum entropy production rate in plug flow reactors: An optimal control problem solved for SO2 oxidation , 2004 .

[25]  Yoshitaka Inui,et al.  High performance SOFC/GT combined power generation system with CO2 recovery by oxygen combustion method , 2005 .

[26]  Frank A. Coutelieris,et al.  Exergy analysis of a solid oxide fuel cell power plant fed by either ethanol or methane , 2004 .

[27]  John P. Kopasz,et al.  Fuel processing for fuel cell systems in transportation and portable power applications , 2002 .

[28]  Sangho Yoon,et al.  Suppression of ethylene-induced carbon deposition in diesel autothermal reforming , 2009 .

[29]  John R. Flower,et al.  Synthesis of heat exchanger networks: I. Systematic generation of energy optimal networks , 1978 .

[30]  Alberto Traverso,et al.  Turbomachinery for the air management and energy recovery in fuel cell gas turbine hybrid systems , 2008 .

[31]  Meilin Liu,et al.  Rational SOFC material design: new advances and tools , 2011 .

[32]  N. Woudstra,et al.  Thermodynamic evaluation of small-scale systems with biomass gasifiers, solid oxide fuel cells with Ni/GDC anodes and gas turbines , 2009 .

[33]  Enrico Drioli,et al.  Process intensification and fuel cells using a Multi-Source Multi-Product approach , 2012 .

[34]  Aristide F. Massardo,et al.  Recuperator dynamic performance: Experimental investigation with a microgas turbine test rig , 2011 .

[35]  Fabian Mueller,et al.  On the intrinsic transient capability and limitations of solid oxide fuel cell systems , 2009 .

[36]  Roberto Bove,et al.  Analysis of a solid oxide fuel cell system for combined heat and power applications under non-nominal conditions , 2007 .

[37]  François Maréchal,et al.  Better solutions for process sustainability through better insight in process energy integration , 2001 .

[38]  Dylan Mason,et al.  A light hydrocarbon fuel processor producing high-purity hydrogen , 2003 .

[39]  Fausto Gallucci,et al.  A simulation study of the steam reforming of methane in a dense tubular membrane reactor , 2004 .

[40]  Alexandros Arsalis,et al.  Thermoeconomic modeling and parametric study of hybrid SOFC–gas turbine–steam turbine power plants ranging from 1.5 to 10 MWe , 2008 .

[41]  Alberto Traverso,et al.  Liquid fuel utilization in SOFC hybrid systems , 2009 .

[42]  K. Ahmed,et al.  Demonstration of LPG-fueled solid oxide fuel cell systems , 2002 .

[43]  Azra Selimovic,et al.  Networked solid oxide fuel cell stacks combined with a gas turbine cycle , 2002 .

[44]  Fabian Mueller,et al.  Synergistic integration of a gas turbine and solid oxide fuel cell for improved transient capability , 2008 .

[45]  D. Brett,et al.  Intermediate temperature solid oxide fuel cells. , 2008, Chemical Society reviews.

[46]  Nigel P. Brandon,et al.  Modelling system efficiencies and costs of two biomass-fuelled SOFC systems , 2004 .

[47]  Brant A. Peppley,et al.  Integrated fuel processors for fuel cell application : A review , 2007 .

[48]  Xiangyang Zhou,et al.  Mathematical analysis of planar solid oxide fuel cells , 2008 .

[49]  Yiping Dai,et al.  Thermodynamic analysis of a new combined cooling, heat and power system driven by solid oxide fuel cell based on ammonia–water mixture , 2011 .

[50]  S. Chan,et al.  Energy and exergy analysis of simple solid-oxide fuel-cell power systems , 2002 .

[51]  Wei Chen,et al.  Analysis of total energy system based on solid oxide fuel cell for combined cooling and power applications , 2010 .

[52]  E. Dinjus,et al.  Methanol Reforming in Supercritical Water , 2003 .

[53]  George E. Marnellos,et al.  From biomass to electricity through integrated gasification/SOFC system-optimization and energy balance , 2007 .

[54]  G. Huber,et al.  Raney Ni-Sn Catalyst for H2 Production from Biomass-Derived Hydrocarbons , 2003, Science.

[55]  H. Ho,et al.  Multi-level modeling of SOFC–gas turbine hybrid system , 2003 .

[56]  Chunwen Sun,et al.  Cathode materials for solid oxide fuel cells: a review , 2010 .

[57]  A. Abad,et al.  Mapping of the range of operational conditions for Cu-, Fe-, and Ni-based oxygen carriers in chemical-looping combustion , 2007 .

[58]  Yixin Lu,et al.  A solid oxide fuel cell system for buildings , 2007 .

[59]  Nigel P. Brandon,et al.  SOFC technology development at Rolls-Royce , 2000 .

[60]  Claude Mirodatos,et al.  A combined thermodynamic/experimental study for the optimisation of hydrogen production by catalytic reforming of isooctane , 2005 .

[61]  Bodo Linnhoff,et al.  Heat and power networks in process design. Part I: Criteria for placement of heat engines and heat pumps in process networks , 1983 .

[62]  Miriam Kemm,et al.  Steady state and transient thermal stress analysis in planar solid oxide fuel cells , 2005 .

[64]  N. Shah,et al.  Hydrogen Production by Catalytic Decomposition of Methane , 2001 .

[65]  Ali Akbar Alemrajabi,et al.  Exergy based performance analysis of a solid oxide fuel cell and steam injected gas turbine hybrid power system , 2009 .

[66]  Ing.Steffen Wieland,et al.  Membrane reactors for hydrogen production , 2002 .

[67]  Bjarne A. Foss,et al.  Modeling and control of a SOFC-GT-based autonomous power system , 2007 .

[68]  C. Cormos,et al.  Innovative Concepts for Hydrogen Production Processes Based on Coal Gasification with CO2 Capture , 2008 .

[69]  Huajiang Huang,et al.  A review of separation technologies in current and future biorefineries , 2008 .

[70]  K. Pant,et al.  Hydrogen Production from Glucose Using Ru/Al2O3 Catalyst in Supercritical Water , 2007 .

[71]  Alberto Traverso,et al.  Thermoeconomic analysis of pressurized hybrid SOFC systems with CO2 separation , 2008 .

[72]  Shinji Kimijima,et al.  Performance analysis of the SOFC–MGT hybrid system with gasified biomass fuel , 2007 .

[73]  Kristian M. Lien,et al.  Equipartition of Forces: A New Principle for Process Design and Optimization , 1996 .

[74]  Daniele Cocco,et al.  Externally reformed solid oxide fuel cell–micro-gas turbine (SOFC–MGT) hybrid systems fueled by methanol and di-methyl-ether (DME) , 2009 .

[75]  Peter Pfeifer,et al.  Catalytic conversion of propane to hydrogen in microstructured reactors , 2004 .

[76]  E. Drioli,et al.  HIGH TEMPERATURE MEMBRANE REACTORS AND INTEGRATED MEMBRANE OPERATIONS , 2002 .

[77]  Juan Adánez,et al.  Optimization of hydrogen production by Chemical-Looping auto-thermal Reforming working with Ni-based , 2011 .

[78]  P. F. van den Oosterkamp,et al.  Critical issues in heat transfer for fuel cell systems , 2006 .

[79]  S. Kjelstrup,et al.  Efficient Conversion of Thermal Energy into Hydrogen: Comparing Two Methods to Reduce Exergy Losses in a Sulfuric Acid Decomposition Reactor , 2009 .

[80]  Kristian M. Lien,et al.  Analysis of Entropy Production Rates for Design of Distillation Columns , 1995 .

[81]  P. Douglas,et al.  Thermodynamic assessment of solid oxide fuel cell system integrated with bioethanol purification unit , 2007 .

[82]  Hydrogen enrichment of fuels using a novel miniaturised chemical looping steam reformer , 2012 .

[83]  M. Krumpelt,et al.  Activity and Structure of Perovskites as Diesel Reforming Catalysts for Solid Oxide Fuel Cell , 2005 .

[84]  Aristide F. Massardo,et al.  Design and part-load performance of a hybrid system based on a solid oxide fuel cell reactor and a micro gas turbine , 2001 .

[85]  Kei Yamashita,et al.  Energyplexes for the 21st century: Coal gasification for co-producing hydrogen, electricity and liquid fuels , 2005 .

[86]  Ruzhu Wang,et al.  COMBINED COOLING, HEATING AND POWER: A REVIEW , 2006 .

[87]  Theodore R. Krause,et al.  Effect of temperature, steam-to-carbon ratio, and alkali metal additives on improving the sulfur tolerance of a Rh/La–Al2O3 catalyst reforming gasoline for fuel cell applications , 2008 .

[88]  Jack Brouwer,et al.  Control design of an atmospheric solid oxide fuel cell/gas turbine hybrid system: Variable versus fixed speed gas turbine operation , 2006 .

[89]  Tae Seok Lee,et al.  Design and optimization of a combined fuel reforming and solid oxide fuel cell system with anode off-gas recycling , 2011 .

[90]  Tong Seop Kim,et al.  Design performance analysis of pressurized solid oxide fuel cell/gas turbine hybrid systems considering temperature constraints , 2006 .

[91]  K. Sundmacher,et al.  A Mass Integration Concept for High Temperature Fuel Cell Plants , 2011 .

[92]  Saad Mekhilef,et al.  Comparative study of different fuel cell technologies , 2012 .

[93]  Kyriakos D. Panopoulos,et al.  Integrated CHP with autothermal biomass gasification and SOFC–MGT , 2008 .

[94]  Xiongwen Zhang,et al.  A review of integration strategies for solid oxide fuel cells , 2010 .

[95]  Angelika Heinzel,et al.  Hydrogen generation from biogenic and fossil fuels by autothermal reforming , 2000 .

[96]  Mohsen Assadi,et al.  Optimisation of an SOFC/GT system with CO2-capture , 2004 .

[97]  J. H. Horlock.  Combined Power Plants—Past, Present, and Future , 1995 .

[98]  R. Reimert,et al.  Noble metal catalysts supported on gadolinium doped ceria used for natural gas reforming in fuel cell applications , 2007 .

[99]  Shin'ya Obara,et al.  Power generation efficiency of an SOFC–PEFC combined system with time shift utilization of SOFC exhaust heat , 2010 .

[100]  Phillip N. Hutton,et al.  Carbon deposition in an SOFC fueled by tar-laden biomass gas: a thermodynamic analysis , 2005 .

[101]  Amornchai Arpornwichanop,et al.  Integration of solid oxide fuel cell and palladium membrane reactor: Technical and economic analysis , 2009 .

[102]  Jitian Han,et al.  Investigation on performance of an integrated solid oxide fuel cell and absorption chiller tri-gener , 2011 .

[103]  Bodo Linnhoff,et al.  Heat and power networks in process design. Part II: Design procedure for equipment selection and process matching , 1983 .

[104]  W. Kiatkittipong,et al.  Performance improvement of bioethanol-fuelled solid oxide fuel cell system by using pervaporation , 2011 .