Stress corrosion cracking susceptibility and surface characterization of nanocrystalline Cu–Cr alloys in dilute ammonia solution

[1]  Yanjing Su,et al.  High-throughput technique for stress corrosion cracking susceptibility measurements based on film-induced stress , 2022, Vacuum.

[2]  Yonghao Zhao,et al.  Enhancing strength and electrical conductivity of Cu–Cr composite wire by two-stage rotary swaging and aging treatments , 2022, Composites Part B: Engineering.

[3]  Yanjing Su,et al.  High-throughput preparation and electrochemical screening of nanocrystalline Fe-Cr-Ni material libraries with homogeneous element distribution , 2021, Corrosion Science.

[4]  Bin Yang,et al.  First-principles study of phase transformations in Cu–Cr alloys , 2021 .

[5]  P. Souček,et al.  Effect of substrate bias voltage on the composition, microstructure and mechanical properties of W-B-C coatings , 2020 .

[6]  Z. Cui,et al.  Understanding the macroscopical flexibility/fragility of nanoporous Ag: Depending on network connectivity and micro-defects , 2020 .

[7]  H. Springer,et al.  Synthesis, microstructure, and hardness of rapidly solidified Cu-Cr alloys , 2019, Journal of Alloys and Compounds.

[8]  P. Shrotriya,et al.  Stress-generating electrochemical reactions during the initial growth of anodic titanium dioxide nanotube layers , 2019, Electrochimica Acta.

[9]  W. Tong,et al.  Investigation on the microstructure and properties of Cu-Cr alloy prepared by in-situ synthesis method , 2018 .

[10]  Ö. Ö. Çapraz,et al.  Stress Induced by Electrolyte Anion Incorporation in Porous Anodic Aluminum Oxide , 2017 .

[11]  S. Selberherr,et al.  Growth rates of dry thermal oxidation of 4H-silicon carbide , 2016 .

[12]  W. Ke,et al.  Corrosion product film formed on the 90/10 copper–nickel tube in natural seawater: Composition/structure and formation mechanism , 2015 .

[13]  Xiaojie Li,et al.  Primary and Secondary Dealloying of Au(Pt)-Ag: Structural and Compositional Evolutions, and Volume Shrinkage , 2014 .

[14]  H. T. Tran,et al.  Passive film-induced stress and mechanical properties of α-Ti in methanol solution , 2014 .

[15]  W. Chu,et al.  Molecular dynamics simulation of porous layer-induced stress in Fe single crystal , 2010 .

[16]  R. Balasubramaniam,et al.  Development of novel brasses to resist dezincification , 2007 .

[17]  W. Chu,et al.  In situ TEM study of stress corrosion cracking of austenitic stainless steel , 2003 .

[18]  M. J. Pryor,et al.  The mechanism of stress corrosion cracking of Cu-base alloys , 1990 .

[19]  R. C. Newman,et al.  The Relationship Between Dealloying and Transgranular Stress-Corrosion Cracking of Cu-Zn and Cu-Al Alloys , 1987 .

[20]  T. Takemoto,et al.  The effect of pH, copper content and ammonia concentration on the stress corrosion cracking susceptibility of an aged Cu−4%Ti alloy , 1978 .

[21]  E. Mattsson.  Stress corrosion in brass considered against the background of potential/pH diagrams , 1961 .