An Analysis of the Strayton Engine, a Brayton and Stirling Cycle Recuperating Engine

This paper explores the novel Strayton engine concept. This engine combines the cycles of a Brayton engine with that of a Stirling engine to create a highly efficient recuperating gas turbine engine. In the explored case, both Brayton cycle and Stirling cycle engines are used to generate electrical power. Additionally, the Stirling engine is used to draw heat out of the Brayton turbine (acting to cool the turbine blades), while also pumping heat into Brayton cycle just before combustion occurs (acting as the mechanism for recuperation). The purpose of this paper is to detail the system level modeling techniques used to generate the simulation, perform a cycle analysis of the combined cycle engine, identify key technologies and challenges associated with the concept, and compare potential performance gains with existing gas turbine engines and internal combustion engines. Topics such as controls, blade cooling effects, engine weight, and heat transfer using heat pipe are also explored. Results from this work show potential architectures that could provide the required heat transfer rates, potential control strategies, and performance benefits, including efficiency gains between 10% and 3% on engines ranging from 200HP to 670HP with the combined cycle engine.

[1]  Alessandro Golkar,et al.  Stirling Engine Systems Tradespace Exploration Framework , 2015 .

[2]  G. Benvenuto,et al.  The use of Stirling engines in combined cycle power plants , 1989, Proceedings of the 24th Intersociety Energy Conversion Engineering Conference.

[3]  James L. Felder,et al.  Overview of NASA Electrified Aircraft Propulsion Research for Large Subsonic Transports , 2017 .

[4]  Jeffryes W. Chapman.  Multipoint Design and Optimization of a Turboshaft Engine for a Tiltwing Turboelectric Vertical Takeoff Landing Air Taxi , 2019 .

[5]  Rouhollah Ahmadi,et al.  Energetical, exergetical and economical optimization analysis of combined power generation system of gas turbine and Stirling engine , 2018 .

[6]  Christopher A. Snyder.  Personal Rotorcraft Design and Performance with Electric Hybridization , 2017 .

[7]  A. Bejan.  Convection Heat Transfer: Bejan/Convection Heat Transfer 4e , 2013 .

[8]  Kevin J. Melcher,et al.  A Reduced Model for Prediction of Thermal and Rotational Effects on Turbine Tip Clearance , 2003 .

[9]  G. Swift,et al.  A cascade thermoacoustic engine. , 2003, The Journal of the Acoustical Society of America.

[10]  Wayne Johnson,et al.  Concept Vehicles for VTOL Air Taxi Operations , 2018 .

[11]  Wayne Johnson,et al.  VTOL Urban Air Mobility Concept Vehicles for Technology Development , 2018, 2018 Aviation Technology, Integration, and Operations Conference.

[12]  A. Bejan.  Convection Heat Transfer , 1984 .

[13]  Sean Wakayama,et al.  A Study in Reducing the Cost of Vertical Flight with Electric Propulsion , 2017 .

[14]  Alibakhsh Kasaeian,et al.  Multi-objective optimization of Stirling engine using non-ideal adiabatic method , 2014 .

[15]  Scott M. Jones.  An Introduction to Thermodynamic Performance Analysis of Aircraft Gas Turbine Engine Cycles Using the Numerical Propulsion System Simulation Code , 2013 .

[16]  Noam Lior,et al.  Analysis and comparison of solar-heat driven Stirling, Brayton and Rankine cycles for space power generation , 2017 .

[17]  W. A. Fleming,et al.  The History of North American Small Gas Turbine Aircraft Engines , 1999 .

[18]  A. G. Newton.  Aircraft Engine Design. J. D. Mattingly.et al.. American Institute of Aeronautics and Astronautics Inc, New York. 1987. 582 pp. Illustrated. $40.00 (AIAA Members), $49.50 (Non-AIAA Members). , 1987 .