Modeling flow stress constitutive behavior of SA508-3 steel for nuclear reactor pressure vessels

Based on the measured stress–strain curves under different temperatures and strain rates, a series of flow stress constitutive equations for SA508-3 steel were firstly established through the classical theories on work hardening and softening. The comparison between the experimental and modeling results has confirmed that the established constitutive equations can correctly describe the mechanical responses and microstructural evolutions of the steel under various hot deformation conditions. We further represented a successful industrial application of this model to simulate a forging process for a large conical shell used in a nuclear steam generator, which evidences its practical and promising perspective of our model with an aim of widely promoting the hot plasticity processing for heavy nuclear components of fission reactors.

[1]  K. P. Rao,et al.  Hot Deformation Studies On A Low-Carbon Steel: Part 2 - An Algorithm For The Flow Stress Determination Under Varying Process Conditions , 1996 .

[2]  K. P. Rao,et al.  Hot Deformation Studies On A Low-Carbon Steel: Part 1 - Flow Curves And The Constitutive Relationship , 1996 .

[3]  D. Wee,et al.  Analysis of the master curve approach on the fracture toughness properties of SA508 Gr.4N Ni–Mo–Cr low alloy steels for reactor pressure vessels , 2010 .

[4]  C. M. Sellars.  The kinetics of softening processes during hot working of austenite , 1985 .

[5]  Thak Sang Byun,et al.  Local mechanical properties of Alloy 82/182 dissimilar weld joint between SA508 Gr.1a and F316 SS at RT and 320 °C , 2009 .

[6]  Youngseog Lee,et al.  Modeling of AGS and recrystallized fraction of microalloyed medium carbon steel during hot deformation , 2003 .

[7]  Hyung-Kyu Kim,et al.  Changes in magnetic properties of neutron irradiated RPV steel , 1998 .

[8]  Oscar Balancin,et al.  Prediction of steel flow stresses under hot working conditions , 2005 .

[9]  R. Honeycombe.  Steels, Microstructure and Properties , 1982 .

[10]  J. Yoon,et al.  Characterization of high strength and high toughness Ni―Mo―Cr low alloy steels for nuclear application , 2010 .

[11]  C. Sellars,et al.  On the mechanism of hot deformation , 1966 .

[12]  Yuri Estrin,et al.  A unified phenomenological description of work hardening and creep based on one-parameter models , 1984 .

[13]  Bong Sang Lee,et al.  J-R fracture properties of SA508-1a ferritic steels and SA312-TP347 austenitic steels for pressurized water reactor’s (PWR) primary coolant piping , 2000 .

[14]  Hyung-Kyu Kim,et al.  Evaluation of thermal recovery of neutron-irradiated SA508-3 steel using magnetic property measurements , 1997 .

[15]  Seok-Jae Lee,et al.  Prediction of austenite grain growth during austenitization of low alloy steels , 2008 .

[16]  Xinqiang Wu,et al.  Effects of strain rate and temperature on tensile behavior of hydrogen-charged SA508 Cl.3 pressure vessel steel , 2003 .

[17]  T. Byun,et al.  Measurement of through-the-thickness variations of mechanical properties in SA508 Gr.3 pressure vessel steels using ball indentation test technique , 1997 .

[18]  Y. Bergström,et al.  A dislocation model for the stress-strain behaviour of polycrystalline α-Fe with special emphasis on the variation of the densities of mobile and immobile dislocations , 1970 .

[19]  H. J. McQueen,et al.  Constitutive analysis in hot working , 2002 .

[20]  S. Serajzadeh,et al.  An investigation on the effect of carbon and silicon on flow behavior of steel , 2002 .