Abstract This paper describes the fast charge ability, or “fast rechargeability”, of nominal 85 Ah Ni–MH modules under various fast charge conditions, including constant current (CC); typically 1-3C, and constant power (CP) regimes. Our tests revealed that there is no apparent difference between CC and CP fast charge regimes with respect to charge efficiency and time. Following the USABC Electric Vehicle Battery Test Procedures Manual (Revision 2, 1996), we demonstrated that we were able to return 40% state of charge (SOC) from 60% depth of discharge (DOD) to 20% DOD within 15 min. Most importantly, we found that the internal pressure of the cell is the most critical parameter in the control of the fast charge process and the safe operation of the modules.
[1]
Sung Chul Kim,et al.
Fast-charging of a lead–acid cell: effect of rest period and depolarization pulse
,
2000
.
[2]
T. G. Chang,et al.
Rapid partial charging of lead/acid batteries
,
1997
.
[3]
D. Pavlov,et al.
Influence of fast charge on the life cycle of positive lead–acid battery plates
,
2000
.
[4]
M. Fernández,et al.
Charging strategies for valve-regulated lead/acid batteries in electric-vehicle applications
,
1997
.
[5]
E. M. Valeriote,et al.
Effects of fast charging on hybrid lead/acid battery temperature
,
1994
.
[6]
P. T. Moseley.
Lead/acid battery myths
,
1996
.