Stability Analysis in Determining Safety Drilling Fluid Pressure Windows in Ice Drilling Boreholes

Borehole stability analysis has been well studied in oil and gas exploration when drilling through rock formations. However, a related analysis of ice borehole stability has never been conducted. This paper proposes an innovative method for estimating the drilling fluid pressure window for safe and sustainable ice drilling, which has never been put forward before. First, stress concentration on a vertical ice borehole wall was calculated, based on the common elastic theory. Then, three failure criteria, the Mogi–Coulomb, teardrop, and Derradji-Aouat criteria, were used to predict the stability of the ice borehole for an unbroken borehole wall. At the same time, fracture mechanics were used to analyze the stable critical pressure for a fissured wall. Combining with examples, our discussion shows how factors like temperature, strain rate, ice fracture toughness, ice friction coefficient, and fracture/crack length affect the stability of the borehole wall. The results indicate that the three failure criteria have similar critical pressures for unbroken borehole stability and that a fissured borehole could significantly decrease the safety drilling fluid pressure window and reduce the stability of the borehole. The proposed method enriches the theory of borehole stability and allows drillers to adjust the drilling fluid density validly in ice drilling engineering, for potential energy exploration in polar regions.

[1]  Zoback,et al.  Strength anisotropy in crystalline rock: Implications for assessment of in situ stresses from wellbore breakouts , 2020, Rock Mechanics Contributions and Challenges: Proceedings of the 31st U.S. Symposium.

[2]  Pavel Talalay,et al.  Hydraulic fracturing in ice boreholes: Theory and tests , 2019, Polar Science.

[3]  Chaoshui Xu,et al.  Study on effect of in-situ stress ratio and discontinuities orientation on borehole stability in heavily fractured rocks using discrete element method , 2016 .

[4]  Tianshou Ma,et al.  A wellbore stability analysis model with chemical-mechanical coupling for shale gas reservoirs , 2015 .

[5]  N. Melkoumian,et al.  Shear failure analysis of a shallow depth unsupported borehole drilled through poorly cemented granular rock , 2014 .

[6]  Yan Jin,et al.  Wellbore stability model for shale gas reservoir considering the coupling of multi-weakness planes and porous flow , 2014 .

[7]  Vamegh Rasouli,et al.  Practical application of failure criteria in determining safe mud weight windows in drilling operations , 2014 .

[8]  Pavel Talalay,et al.  Drilling fluid technology in ice sheets: Hydrostatic pressure and borehole closure considerations , 2014 .

[9]  Harvey E. Goodman,et al.  A wellbore stability model for formations with anisotropic rock strengths , 2012 .

[10]  Peter Englezos,et al.  Physics of ice friction , 2010 .

[11]  Paul Duval,et al.  Creep and Fracture of Ice: Acknowledgements , 2009 .

[12]  Robert W. Zimmerman,et al.  Stability analysis of vertical boreholes using the Mogi–Coulomb failure criterion , 2006 .

[13]  Carl E. Renshaw,et al.  On the role of frictional sliding in the compressive fracture of ice and granite: Terminal vs. post-terminal failure , 2006 .

[14]  Robert W. Zimmerman,et al.  Relation between the Mogi and the Coulomb failure criteria , 2005 .

[15]  C. Tan,et al.  A study on wellbore stability in fractured rock masses with impact of mud infiltration , 2003 .

[16]  Ahmed Derradji-Aouat,et al.  Multi-surface failure criterion for saline ice in the brittle regime , 2003 .

[17]  Bezalel C. Haimson,et al.  True triaxial strength of the KTB amphibolite under borehole wall conditions and its use to estimate the maximum horizontal in situ stress , 2002 .

[18]  Mark D. Zoback,et al.  A statistical evaluation of intact rock failure criteria constrained by polyaxial test data for five different rocks , 2002 .

[19]  Shoji,et al.  Deep ice core drilling to 2503 m depth at Dome Fuji, Antarctica , 2002 .

[20]  Evert Hoek,et al.  Practical estimates of rock mass strength , 1997 .

[21]  A. M. Nawwar,et al.  Triaxial Testing of Freshwater Ice at Low Confining Pressures , 1991 .

[22]  Bernt S. Aadnøy,et al.  Stability of adjacent boreholes , 1991 .

[23]  Stephen H. Kirby,et al.  Friction of ice , 1988 .

[24]  S. D. Hallam,et al.  The failure of brittle solids containing small cracks under compressive stress states , 1986 .

[25]  Paul F. Gnirk,et al.  The Mechanical Behavior of Uncased Wellbores Situated in Elastic/Plastic Media Under Hydrostatic Stress , 1972 .

[26]  John A. Franklin,et al.  Triaxial strength of rock materials , 1971 .

[27]  Kiyoo Mogi,et al.  Fracture and flow of rocks under high triaxial compression , 1971 .

[28]  H. C. Heard,et al.  EFFECTS OF THE INTERMEDIATE PRINCIPAL STRESS ON THE FAILURE OF LIMESTONE, DOLOMITE, AND GLASS AT DIFFERENT TEMPERATURES AND STRAIN RATES , 1967 .

[29]  D. W. Hobbs,et al.  The Strength and the Stress-Strain Characteristics of Coal in Triaxial Compression , 1964, The Journal of Geology.

[30]  Anne Nagel,et al.  Principles Of Glacier Mechanics , 2016 .

[31]  E. Schulson,et al.  On friction and surface cracking during sliding of ice on ice , 2003, Journal of Glaciology.

[32]  S. Willson,et al.  Development of an Orthotropic 3D Elastoplastic Material Model for Shale , 2002 .

[33]  P. H. Gammon,et al.  Triaxial experiments on iceberg and glacier ice , 1995, Journal of Glaciology.

[34]  M. Rist,et al.  Ice triaxial deformation and fracture , 1994, Journal of Glaciology.

[35]  M. A. Addis,et al.  Wellbore Stability: The Effect of Strength Criteria on Mud Weight Recommendations , 1990 .

[36]  Niels S. Gundestrup,et al.  Resurvey of Bore Hole at Dye 3, South Greenland , 1988, Journal of Glaciology.

[37]  G. Fuh,et al.  Use of Borehole Stability Analysis for Successful Drilling of High-Angle Hole , 1988 .

[38]  R. F. Mitchell,et al.  Borehole Stresses: Plasticity and the Drilled Hole Effect , 1987 .

[39]  H M Westergaard,et al.  PLASTIC STATE OF STRESS AROUND A DEEP WELL , 1940 .