Accurate and simple assembly process of shape memory alloy tubular micro manipulator with a bias mechanism

This paper describes the fabrication and assembly of a tubular micro manipulator consisting of a TiNiCu shape memory alloy (SMA) actuator with a coaxial tubular bias mechanism of a TiNi super elasticity alloy. The TiNiCu actuator has meandering shaped springs connected to joint rings (O.D.: [email protected], I.D.: [email protected]) in which a bias mechanism is inserted. To simplify the assembly process, the joint rings have an extendable structure to facilitate insertion of the tubular bias mechanism (O.D.: [email protected]) into the former. Subsequently, the joint rings are locally heated to shrink and clamp the bias spring. The extension and shrinking process facilitated the highly accurate assembly of the tubular SMA manipulator with the bias spring. The assembled manipulator was also strong enough to resist fracture during the bending operation following actuation of the SMA meandering springs.

[1]  Yoichi Haga,et al.  Batch fabricated flat meandering shape memory alloy actuator for active catheter , 2001 .

[2]  Kazuhiro Kosuge,et al.  Micro active catheter system with multi degrees of freedom , 1994, Proceedings of the 1994 IEEE International Conference on Robotics and Automation.

[3]  Masayoshi Esashi,et al.  Bending, torsional and extending active catheter assembled using electroplating , 2000, Proceedings IEEE Thirteenth Annual International Conference on Micro Electro Mechanical Systems (Cat. No.00CH36308).

[4]  Takayuki Shibata,et al.  Fabrication of cylindrical micro actuator by etching of TiNiCu shape memory alloy tube , 2011 .

[5]  Masayoshi Esashi,et al.  Non-planer Photo-fabrication of an Actuator-Unit from a Shape Memory Alloy Pipe , 2003 .

[6]  G. Lim,et al.  Future of active catheters , 1996 .

[7]  Y. Ueda,et al.  Development of a microfine active bending catheter equipped with MIF tactile sensors , 1999, Technical Digest. IEEE International MEMS 99 Conference. Twelfth IEEE International Conference on Micro Electro Mechanical Systems (Cat. No.99CH36291).

[8]  Koji Ikuta,et al.  Safety active catheter with multi-segments driven by innovative hydro-pressure micro actuators , 2003, The Sixteenth Annual International Conference on Micro Electro Mechanical Systems, 2003. MEMS-03 Kyoto. IEEE.