High-resolution and high-conductive electrode fabrication on a low thermal resistance flexible substrate

Processes based on the liquid-state pattern transfer, like inkjet printing, have critical limitations including low resolution and low electrical conductivity when fabricating electrodes on low thermal resistance flexible substrates such as polyethylene terephthalate (PET). Those are due to the nonlinear transfer mechanism and the limit of the sintering temperature. Although the laser direct curing (LDC) of metallic inks is an alternative process to improve the resolution, it is also associated with the disadvantages of causing thermal damage to the polymer substrate. This paper suggests the laser induced pattern adhesion transfer method to fabricate electrodes of both high electrical conductivity and high resolution on a PET substrate. First, solid patterns are cost-effectively created by the LDC of the organometallic silver ink on a glass that is optically and thermally stable. The solid patterns sintered on the glass are transferred to the PET substrate by the photo-thermally generated adhesion force of the substrate. Therefore, we achieved electrodes with a minimum line width of 10 ?m and a specific resistance of 3.6 ??cm on the PET substrate. The patterns also showed high mechanical reliability.

[1]  P. Buffat,et al.  Size effect on the melting temperature of gold particles , 1976 .

[2]  J. Ehrhardt,et al.  An overview on metal/PET adhesion , 1993 .

[3]  Chunlei Du,et al.  Analysis and design of fiber-coupled high-power laser diode array , 2003, SPIE Optics + Photonics.

[4]  C. Grigoropoulos,et al.  Microstructuring by printing and laser curing of nanoparticle solutions , 2003 .

[5]  X. Zu,et al.  Optical properties of metallic nanoparticles in Ni-ion-implanted α-Al2O3 single crystals , 2004 .

[6]  C. Grigoropoulos,et al.  An experimental investigation of microresistor laser printing with gold nanoparticle-laden inks , 2005 .

[7]  Hsien-Hsueh Lee,et al.  Inkjet printing of nanosized silver colloids , 2005, Nanotechnology.

[8]  Satish Kumar,et al.  Flow visualization of the liquid emptying process in scaled-up gravure grooves and cells , 2006 .

[9]  Manuel Laso,et al.  Numerical simulation of 3D viscoelastic flows with free surfaces , 2006, J. Comput. Phys..

[10]  Patrick J. Smith,et al.  Direct ink-jet printing and low temperature conversion of conductive silver patterns , 2006 .

[11]  C. Grigoropoulos,et al.  Air stable high resolution organic transistors by selective laser sintering of ink-jet printed metal nanoparticles , 2007 .

[12]  Hyoungsub Kim,et al.  Photoresist‐Free Lithographic Patterning of Solution‐Processed Nanostructured Metal Thin Films , 2008 .

[13]  U. Schubert,et al.  Inkjet-printed silver tracks : low temperature curing and thermal stability investigation , 2008 .

[14]  C. Ha,et al.  Polymers for flexible displays: From material selection to device applications , 2008 .

[15]  Alejandro de la Fuente Vornbrock.  Roll Printed Electronics: Development and Scaling of Gravure Printing Techniques , 2009 .

[16]  U. Schubert,et al.  One-step inkjet printing of conductive silver tracks on polymer substrates , 2009, Nanotechnology.

[17]  Sangtae Kim,et al.  Parallelized laser-direct patterning of nanocrystalline metal thin films by use of a pulsed laser-induced thermo-elastic force , 2009, Nanotechnology.

[18]  A. Watanabe,et al.  Fabrication of conductive silver micropatterns on an organic―inorganic hybrid film by laser direct writing , 2009 .

[19]  A. Watanabe,et al.  Direct writing of conductive silver micropatterns on flexible polyimide film by laser-induced pyrolysis of silver nanoparticle-dispersed film , 2010 .

[20]  Sang-Woon Lee,et al.  Analysis on the ink transfer mechanism in R2R application , 2010 .

[21]  S. Ko,et al.  Microelectrode fabrication by laser direct curing of tiny nanoparticle self-generated from organometallic ink. , 2011, Optics express.