Automotive Evaporator and Condenser Modeling

[1]  A. Bergles,et al.  Evaporation and condensation of refrigerant-oil mixtures in a smooth tube and a micro-fin tube , 1988 .

[2]  S. P. Sukhatme,et al.  Film Condensation of R-11 Vapor on Single Horizontal Enhanced Condenser Tubes , 1990 .

[3]  A. Bontemps,et al.  Condensation of a vapour with incondensables: An improved gas phase film model accounting for the effect of mass transfer on film thickness , 1990 .

[4]  H. Honda,et al.  A prediction method for heat transfer during film condensation on horizontal low integral-fin tubes , 1987 .

[5]  M. Shah.  A general correlation for heat transfer during film condensation inside pipes , 1979 .

[6]  W. Focke.  Asymmetrically corrugated plate heat exchanger plates , 1985 .

[7]  V. V. Klimenko,et al.  A generalized correlation for two-phase forced flow heat transfer , 1988 .

[8]  E. N. Sieder,et al.  Heat Transfer and Pressure Drop of Liquids in Tubes , 1936 .

[9]  H. K. Varma,et al.  Prediction of Flow Patterns During Condensation of Binary Mixtures in a Horizontal Tube , 1985 .

[10]  A. R. Wieting,et al.  Empirical correlations for heat transfer and flow friction characteristics of rectangular offset-fin plate-fin heat exchangers , 1975 .

[11]  G. R. Hall,et al.  Correlation of forced convection boiling heat transfer data , 1982 .

[12]  Andrés Melgar,et al.  Correlations for heat transfer and flow friction characteristics of compact plate-type heat exchangers , 1992 .

[13]  S. M. Zubair,et al.  Second-law-based thermoeconomic optimization of two-phase heat exchangers , 1987 .

[14]  Refrigerating.  ASHRAE handbook and product directory /published by the American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc , 1977 .

[15]  Ralph L. Webb,et al.  An Analytical Model to Predict Condensate Retention on Horizontal Integral-Fin Tubes , 1985 .

[16]  T. M. Rudy,et al.  Prediction of the Condensation Coefficient on Horizontal Integral-Fin Tubes , 1985 .