Test Method for Contactless On-Wafer MEMS Characterization and Production Monitoring

Microelectromechanical systems (MEMS) are widely utilized in various devices ranging from consumer electronics and medical devices to modern industrial equipment. Their fabrication with the help of semiconductor technology leads to very low cost devices. However, the fabrication test systems need to be extended to cover the mechanical domain of MEMS devices. Therefore, this paper presents a new concept that is able to evaluate the stiffness of silicon membranes in MEMS microphones. Due to the use of electromagnetic waves in the millimeter-wave spectrum, an optical line of sight is not necessary. The test setup can be parallelized to improve the throughput, and it can gain important feedback information to tune operating parameters of the production process.

[1]  Robert Weigel,et al.  A large deflection model of silicon membranes for testing intrinsic stress of MEMS microphones by measuring pull-In voltage , 2013, Microtechnologies for the New Millennium.

[2]  Robert Weigel,et al.  A novel, W-band microwave based contactless test method for mechanical sensitivity analysis of MEMS , 2013, 2013 IEEE MTT-S International Microwave Symposium Digest (MTT).

[3]  Robert Weigel,et al.  100 GHz reflectometer for sensitivity analysis of MEMS sensors comprising an intermediate frequency Six-port receiver , 2015, 2015 IEEE Topical Conference on Wireless Sensors and Sensor Networks (WiSNet).

[4]  L. Rocha,et al.  Analysis and analytical modeling of static pull-In with application to MEMS-based voltage reference and process monitoring , 2004, Journal of Microelectromechanical Systems.

[5]  R. Weigel,et al.  Evaluation of a microwave based contact-free testing method for mechanical sensitivity analysis of MEMS for inline integration of on-wafer measurements , 2013, 2013 European Microwave Conference.

[6]  Malgorzata Kujawinska,et al.  An interferometric test station for massive parallel inspection of MEMS and MOEMS , 2009 .

[7]  Sazzadur Chowdhury,et al.  A Highly accurate method to calculate capacitance of MEMS sensors with circular membranes , 2009, 2009 IEEE International Conference on Electro/Information Technology.

[8]  Yu-Chen Lin,et al.  Respiration Detection Chip With Integrated Temperature-Insensitive MEMS Sensors and CMOS Signal Processing Circuits , 2015, IEEE Transactions on Biomedical Circuits and Systems.

[9]  Olga Boric-Lubecke,et al.  Quadrature Imbalance Compensation With Ellipse-Fitting Methods for Microwave Radar Physiological Sensing , 2014, IEEE Transactions on Microwave Theory and Techniques.

[11]  M. Ahmadi,et al.  Pull-in voltage study of electrostatically actuated fixed-fixed beams using a VLSI on-chip interconnect capacitance model , 2006, Journal of Microelectromechanical Systems.

[12]  Ryutaro Maeda,et al.  Transient measurement of surface deflection for beams and membranes in micromechanical devices , 1998, Other Conferences.

[13]  Robert Neal Dean,et al.  Applications of Microelectromechanical Systems in Industrial Processes and Services , 2009, IEEE Transactions on Industrial Electronics.

[14]  Thilo Sauter,et al.  Robust Precision Position Detection With an Optical MEMS Hybrid Device , 2012, IEEE Transactions on Industrial Electronics.

[15]  Wolfgang Osten,et al.  Optical Inspection of Microsystems , 2006 .

[16]  Xiaomeng Gao,et al.  Data-Based Quadrature Imbalance Compensation for a CW Doppler Radar System , 2013, IEEE Transactions on Microwave Theory and Techniques.

[17]  T. Browne,et al.  Production metrology for MEMS characterization , 2003, Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS 2003..

[18]  E. Martincic,et al.  Optimization and Microfabrication of High Performance Silicon-Based MEMS Microspeaker , 2013, IEEE Sensors Journal.

[19]  L. A. Rocha,et al.  High-Resolution MEMS Inclinometer Based on Pull-In Voltage , 2015, Journal of Microelectromechanical Systems.

[20]  M. Deeds,et al.  Mechanical Response of Silicon MEMS Diaphragms to Applied Pressure , 2014, Journal of Microelectromechanical Systems.

[21]  Christophe Gorecki,et al.  Multifunctional interferometric platform for on-chip testing of the micromechanical properties of MEMS/MOEMS , 2003, SPIE MOEMS-MEMS.

[22]  D. M. Freeman,et al.  Nanometer resolution of three-dimensional motions using video interference microscopy , 1999, Technical Digest. IEEE International MEMS 99 Conference. Twelfth IEEE International Conference on Micro Electro Mechanical Systems (Cat. No.99CH36291).

[23]  J. Dugundji,et al.  Large Deflections of Clamped Circular Plates Under Initial Tension and Transitions to Membrane Behavior , 1998 .

[24]  Malgorzata Kujawinska,et al.  Optical, mechanical, and electro-optical design of an interferometric test station for massive parallel inspection of MEMS and MOEMS , 2009, Optical Metrology.

[25]  Robert Weigel,et al.  A new approach on MEMS sensor batch testing using an analogue parallel test methodology for massive reduction of test time , 2013, 2013 IEEE SENSORS.

[26]  Byung-Hun Kim,et al.  Acoustical-Thermal Noise in a Capacitive MEMS Microphone , 2015, IEEE Sensors Journal.