A yellow-emitting iridium complex for use in phosphorescent multiple-emissive-layer white organic light-emitting diodes with high color quality and efficiency

Abstract A cyclometalated iridium(III) complex containing 2-(9,9-diethylfluoren-2-yl)pyridine [Ir(Flpy)3] was prepared and used in the fabrication of both yellow and white organic light-emitting diodes (OLEDs). A hole-blocking material has been used as a hole barrier layer in-between different emission layers, helping the formation of the hole limitation region. With the proper position of a hole barrier layer and the construction of a four-emission-layer structure involving the use of [Ir(Flpy)3], the resulting WOLED shows sound device performance as well as very stable color even at high luminances. Such WOLEDs have been demonstrated to reveal superior white light color stability/efficiency trade-off optimization. The Commission Internationale de L’Eclairage (CIE) coordinate differences Δx and Δy are confined to ±0.015 when the luminance increases from 13 to 14806 cd/m2. The color rendering index (CRI) of the device is also very good, which varies only from 86 to 87 by changing from the normal direction to 80° off-normal at 12 V. The peak electrophosphorescence efficiency can reach as high as 24.6 cd/A at 168 cd/m2and it can still be kept at 17.2 cd/A at 10834 cd/m2. Such outstanding performance renders this all-phosphor WOLED very attractive as a white light source for illumination applications, which typically demand high efficiency, high CRI, and stable color in high brightness work conditions.

[1]  Stephen R. Forrest,et al.  Controlling Exciton Diffusion in Multilayer White Phosphorescent Organic Light Emitting Devices , 2002 .

[2]  Stephen R. Forrest,et al.  Management of singlet and triplet excitons for efficient white organic light-emitting devices , 2006, Nature.

[3]  H. Kwok,et al.  A novel class of phosphorescent gold(III) alkynyl-based organic light-emitting devices with tunable colour. , 2005, Chemical communications.

[4]  A. Monkman,et al.  Tris-cyclometalated iridium(III) complexes of carbazole(fluorenyl)pyridine ligands: synthesis, redox and photophysical properties, and electrophosphorescent light-emitting diodes. , 2007, Chemistry.

[5]  Guillermo C Bazan,et al.  Amorphous iridium complexes for electrophosphorescent light emitting devices. , 2002, Chemical communications.

[6]  J. Salbeck,et al.  Organic Materials for Photonic Devices , 2003 .

[7]  D. Nickerson.  Technical Note: 1963 CIE Interim Method of Measuring and Specifying Color Rendering of Light Sources , 1964 .

[8]  Brian D'Andrade,et al.  Organic light-emitting device luminaire for illumination applications , 2006 .

[9]  Yang Yang,et al.  White organic light-emitting diodes prepared by a fused organic solid solution method , 2005 .

[10]  C. McCamy,et al.  Correlated color temperature as an explicit function of chromaticity coordinates , 1992 .

[11]  Stephen R. Forrest,et al.  Effects of exciton and charge confinement on the performance of white organic p−i−n electrophosphorescent emissive excimer devices , 2003 .

[12]  S. Sensfuss,et al.  Thienopyrazine-Based Low-Bandgap Poly(heteroaryleneethynylene)s for Photovoltaic Devices , 2006 .

[13]  S. T. Lee,et al.  High-efficiency white organic light-emitting devices using a blue iridium complex to sensitize a red fluorescent dye , 2006 .

[14]  Gang Cheng,et al.  White organic light-emitting devices with a phosphorescent multiple emissive layer , 2006 .

[15]  P. Douglas,et al.  Coordination complexes exhibiting room-temperature phosphorescence: Evaluation of their suitability as triplet emitters in organic light emitting diodes , 2006 .

[16]  Gang Cheng,et al.  Improved efficiency for white organic light-emitting devices based on phosphor sensitized fluorescence , 2006 .

[17]  Stephen R. Forrest,et al.  White Light Emission Using Triplet Excimers in Electrophosphorescent Organic Light‐Emitting Devices , 2002 .

[18]  P. Djurovich,et al.  A new synthetic route to the preparation of a series of strong photoreducing agents: fac-tris-ortho-metalated complexes of iridium(III) with substituted 2-phenylpyridines , 1991 .

[19]  Stephen R. Forrest,et al.  White Stacked Electrophosphorescent Organic Light‐Emitting Devices Employing MoO3 as a Charge‐Generation Layer , 2006 .

[20]  Katsutoshi Nagai,et al.  Multilayer White Light-Emitting Organic Electroluminescent Device , 1995, Science.

[21]  A. Monkman,et al.  Oligo(fluorenyl)pyridine ligands and their tris-cyclometalated iridium(III) complexes: synthesis, photophysical properties and electrophosphorescent devices , 2005 .

[22]  Stephen R. Forrest,et al.  White Organic Light‐Emitting Devices for Solid‐State Lighting , 2004 .

[23]  J. Shiang,et al.  4.1: Invited Paper: Large Area White OLEDs , 2005 .

[24]  Modeeparampil N. Kamalasanan,et al.  White organic LEDs and their recent advancements , 2006 .

[25]  Jian Li,et al.  Efficient, deep-blue organic electrophosphorescence by guest charge trapping , 2003 .

[26]  Stephen R. Forrest,et al.  Phosphorescent materials for application to organic light emitting devices , 1999 .

[27]  Hartmut Yersin,et al.  Triplet emitters for OLED applications. Mechanisms of exciton trapping and control of emission properties , 2004 .

[28]  Xiabin Jing,et al.  White electroluminescence from polyfluorene chemically doped with 1,8-napthalimide moieties , 2004 .

[29]  Hans-Werner Schmidt,et al.  Synthesis and Properties of Novel Derivatives of 1,3,5‐Tris(diarylamino)benzenes for Electroluminescent Devices , 1998 .

[30]  Bei Chu,et al.  White-electrophosphorescent devices based on copper complexes using 2-(4-biphenylyl)-5-(4-tert-butyl-phenyl)-1,3,4-oxadiazole as chromaticity-tuning layer , 2006 .

[31]  Stephen R. Forrest,et al.  Achieving full-color organic light-emitting devices for lightweight, flat-panel displays , 1997 .

[32]  D Murphy,et al.  Highly phosphorescent bis-cyclometalated iridium complexes: synthesis, photophysical characterization, and use in organic light emitting diodes. , 2001, Journal of the American Chemical Society.

[33]  John K. Stille,et al.  The Palladium‐Catalyzed Cross‐Coupling Reactions of Organotin Reagents with Organic Electrophiles [New Synthetic Methods (58)] , 1986 .

[34]  I. Samuel,et al.  The Development of Light‐Emitting Dendrimers for Displays , 2007 .

[35]  Ching Wan Tang,et al.  Recent developments in molecular organic electroluminescent materials , 1997 .

[36]  W. Wong,et al.  Exploring a series of monoethynylfluorenes as alkynylating reagents for mercuric ion: Synthesis, spectroscopy, photophysics and potential use in mercury speciation , 2007 .

[37]  Yun Chi,et al.  Phosphorescent dyes for organic light-emitting diodes. , 2007, Chemistry.

[38]  Hoi Sing Kwok,et al.  High-Efficiency White Organic Light-Emitting Devices Based on a Highly Amorphous Iridium(III) Orange Phosphor , 2006 .

[39]  Hoi Sing Kwok,et al.  Amorphous Diphenylaminofluorene‐Functionalized Iridium Complexes for High‐Efficiency Electrophosphorescent Light‐Emitting Diodes , 2006 .

[40]  S. Forrest,et al.  High-efficiency top-emissive white-light-emitting organic electrophosphorescent devices , 2005 .

[41]  Stephen R. Forrest,et al.  Efficient Organic Electrophosphorescent White‐Light‐Emitting Device with a Triple Doped Emissive Layer , 2004 .

[42]  Richard J. Watts,et al.  Excited-state properties of a triply ortho-metalated iridium(III) complex , 1985 .

[43]  S. Jung,et al.  Effect of Substitution of Methyl Groups on the Luminescence Performance of IrIII Complexes: Preparation, Structures, Electrochemistry, Photophysical Properties and Their Applications in Organic Light‐Emitting Diodes (OLEDs) , 2004 .

[44]  Yong Qiu,et al.  Blue phosphorescent dye as sensitizer and emitter for white organic light-emitting diodes , 2004 .

[45]  Peipei Sun,et al.  New Iridium Complexes as Highly Efficient Orange–Red Emitters in Organic Light‐Emitting Diodes , 2003 .

[46]  A. Köhler,et al.  Synthesis, characterisation and optical spectroscopy of diynes and poly-ynes containing derivatised fluorenes in the backbone , 2003 .

[47]  Alan J. Heeger,et al.  Light emission from semiconducting polymers: Light-emitting diodes, light-emitting electrochemical cells, lasers and white light for the future , 1998 .

[48]  Xiabin Jing,et al.  White Electroluminescence from a Single‐Polymer System with Simultaneous Two‐Color Emission: Polyfluorene as the Blue Host and a 2,1,3‐Benzothiadiazole Derivative as the Orange Dopant , 2006 .

[49]  Sergey Lamansky,et al.  Synthesis and characterization of facial and meridional tris-cyclometalated iridium(III) complexes. , 2003, Journal of the American Chemical Society.

[50]  S. R. Forrest,et al.  High-efficiency fluorescent organic light-emitting devices using a phosphorescent sensitizer , 2000, Nature.

[51]  Gregor Schwartz,et al.  Highly efficient white organic light emitting diodes comprising an interlayer to separate fluorescent and phosphorescent regions , 2006 .

[52]  Ulrich S. Schubert,et al.  New Trends in the Use of Transition Metal–Ligand Complexes for Applications in Electroluminescent Devices , 2005 .

[53]  Z. Xie,et al.  White polymeric light-emitting diodes with high color rendering index , 2006 .

[54]  Jenn‐Fang Chen,et al.  Highly efficient white organic electroluminescent devices based on tandem architecture , 2005 .

[55]  F. S. Wang,et al.  Highly Efficient Pure‐White‐Light‐Emitting Diodes from a Single Polymer: Polyfluorene with Naphthalimide Moieties , 2006 .