FEM Numerical and Experimental Study on Dimensional Accuracy of Tubes Extruded from 6082 and 7021 Aluminium Alloys

The extrusion of hollow profiles from hard-deformable AlZnMg alloys by using porthole dies encounters great technological difficulties in practice. High extrusion force accompanies the technological process, which is caused by high deformation resistance and high friction resistance in extrusion conditions. As a result of high thermo-mechanical loads affecting the die, a significant loss of dimensional accuracy of extruded profiles can be observed. The different projects of porthole dies for the extrusion of Ø50 × 2 mm tubes from the 7021 alloy were numerically calculated and then tested in industrial conditions by using a press of 25 MN capacity equipped with a container with a diameter of 7 inches (for 7021 alloy and 6082 alloy for comparison). New extrusion die 3 with modified bridge and mandrel geometry and a special radial–convex entry to the die opening was proposed. FEM was applied to analyse the metal flow during extrusion, geometrical stability of extruded tubes and the die deflection. The photogrammetric measuring method was used to evaluate dimensional accuracy of tubes extruded in different conditions and geometrical deviations in porthole dies elements, especially the bridges and the mandrels. Research revealed a high dimensional accuracy of tubes extruded from the 6082 alloy and from the 7021 alloy by using original extrusion die 3, while much higher dimensional deviations were noted for tubes extruded from the 7021 alloy by using extrusion dies 1 and 2, particularly in relation to the circularity, centricity and wall thickness.

[1]  J. Grzyb,et al.  Homogenization of 7075 and 7049 Aluminium Alloys Intended for Extrusion Welding , 2021, Metals.

[2]  Jianguo Lin,et al.  Effects of die land length and geometry on curvature and effective strain of profiles produced by a novel sideways extrusion process , 2020 .

[3]  V. Tong,et al.  A Design Approach of Porthole Die for Flow Balance in Extrusion of Complex Solid Aluminum Heatsink Profile with Large Variable Wall Thickness , 2020, Metals.

[4]  J. Yi,et al.  FE analysis of extrusion defect and optimization of metal flow in porthole die for complex hollow aluminium profile , 2018, Transactions of Nonferrous Metals Society of China.

[5]  Guan Wang,et al.  Simulation Analysis of Porthole Die Extrusion Process and Die Structure Modifications for an Aluminum Profile with High Length–Width Ratio and Small Cavity , 2018, Materials.

[6]  G. Vincze,et al.  Assessment of Metal Flow Balance in Multi-Output Porthole Hot Extrusion of AA6060 Thin-Walled Profile , 2018, Metals.

[7]  Peng Li,et al.  Virtual tryout and optimization of the extrusion die for an aluminum profile with complex cross-sections , 2015 .

[8]  Guoqun Zhao,et al.  Analysis and porthole die design for a multi-hole extrusion process of a hollow, thin-walled aluminum profile , 2014 .

[9]  Ramona Hölker,et al.  Extrusion Benchmark 2013 - Experimental Analysis of Mandrel Deflection, Local Temperature and Pressure in Extrusion Dies , 2013 .

[10]  S. Stebunov,et al.  Simulation of Material Flow Coupled with Die Analysis in Complex Shape Extrusion , 2013 .

[11]  Peng Liu,et al.  Die structure optimization for a large, multi-cavity aluminum profile using numerical simulation and experiments , 2012 .

[12]  Guoqun Zhao,et al.  Design of a Multihole Porthole Die for Aluminum Tube Extrusion , 2012 .

[13]  Guoqun Zhao,et al.  Numerical Simulation of Extrusion Process and Die Structure Optimization for a Complex Aluminum Multicavity Wallboard of High-Speed Train , 2011 .

[14]  A. Tekkaya,et al.  Extrusion Benchmark 2009 Experimental Analysis of Deflection in Extrusion Dies , 2009 .

[15]  Jie Zhou,et al.  Extrusion of 7075 aluminium alloy through double-pocket dies to manufacture a complex profile , 2009 .

[16]  Chung-Gil Kang,et al.  Effects of chamber shapes of porthole die on elastic deformation and extrusion process in condenser tube extrusion , 2005 .

[17]  Hyung-Ho Jo,et al.  Determination of welding pressure in the non-steady-state porthole die extrusion of improved Al7003 hollow section tubes , 2003 .

[18]  S. Lou,et al.  Die structure optimization for hollow aluminum profile , 2018 .

[19]  B. Reggiani,et al.  Numerical Assessment of the Influence of Process and Geometric Parameters on Extrusion Welds and Die Deformation after Multiple-cycles☆ , 2015 .

[20]  Q. Hsu,et al.  Non-symmetric Hollow Extrusion of High Strength 7075 Aluminum Alloy , 2014 .