Interface cation migration kinetics induced oxygen release heterogeneity in layered lithium cathodes
暂无分享,去创建一个
Xiaobin Liao | G. Tendeloo | Yan Zhao | Yanxi Li | Zhi-Yi Hu | Lei Zhang | Kangning Zhao | Congli Sun | Sai Mu | Chaofan Li | Yu Li
[1] Yijin Liu,et al. Mutual modulation between surface chemistry and bulk microstructure within secondary particles of nickel-rich layered oxides , 2020, Nature Communications.
[2] Zhong Lin Wang,et al. Quantitative nanoscale tracking of oxygen vacancy diffusion inside single ceria grains by in situ transmission electron microscopy , 2020 .
[3] C. Jung,et al. Degradation of High‐Nickel‐Layered Oxide Cathodes from Surface to Bulk: A Comprehensive Structural, Chemical, and Electrical Analysis , 2020, Advanced Energy Materials.
[4] Xiaobin Liao,et al. High Voltage Cycling Induced Thermal Vulnerability in LiCoO2 Cathode: Cation Loss and Oxygen Release Driven by Oxygen Vacancy Migration. , 2020, ACS nano.
[5] Evan M. Erickson,et al. High-nickel layered oxide cathodes for lithium-based automotive batteries , 2020 .
[6] J. Tarascon,et al. Probing the thermal effects of voltage hysteresis in anionic redox-based lithium-rich cathodes using isothermal calorimetry , 2019, Nature Energy.
[7] Jianming Zheng,et al. Interconnected Vertically Stacked 2D-MoS2 for Ultrastable Cycling of Rechargeable Li-Ion Battery. , 2019, ACS applied materials & interfaces.
[8] Zonghai Chen,et al. Building ultraconformal protective layers on both secondary and primary particles of layered lithium transition metal oxide cathodes , 2019, Nature Energy.
[9] Jun Lu,et al. Oxygen Release Degradation in Li‐Ion Battery Cathode Materials: Mechanisms and Mitigating Approaches , 2019, Advanced Energy Materials.
[10] K. Amine,et al. Injection of oxygen vacancies in the bulk lattice of layered cathodes , 2019, Nature Nanotechnology.
[11] C. Wolverton,et al. Dynamic imaging of crystalline defects in lithium-manganese oxide electrodes during electrochemical activation to high voltage , 2019, Nature Communications.
[12] Fernando A. Soto,et al. Anti‐Oxygen Leaking LiCoO2 , 2019, Advanced Functional Materials.
[13] Bingkun Guo,et al. Improved Electrochemical Performances of LiCoO2 at Elevated Voltage and Temperature with an In Situ Formed Spinel Coating Layer. , 2018, ACS applied materials & interfaces.
[14] Xuanxuan Bi,et al. Evolution of redox couples in Li- and Mn-rich cathode materials and mitigation of voltage fade by reducing oxygen release , 2018, Nature Energy.
[15] Ji‐Guang Zhang,et al. Stable cycling of high-voltage lithium metal batteries in ether electrolytes , 2018, Nature Energy.
[16] Ji‐Guang Zhang,et al. Tailoring grain boundary structures and chemistry of Ni-rich layered cathodes for enhanced cycle stability of lithium-ion batteries , 2018, Nature Energy.
[17] Ji‐Guang Zhang,et al. Coupling of electrochemically triggered thermal and mechanical effects to aggravate failure in a layered cathode , 2018, Nature Communications.
[18] Yimin A. Wu,et al. Approaching the capacity limit of lithium cobalt oxide in lithium ion batteries via lanthanum and aluminium doping , 2018, Nature Energy.
[19] Feng Lin,et al. Oxygen Release Induced Chemomechanical Breakdown of Layered Cathode Materials. , 2018, Nano letters.
[20] L. Gu,et al. Unusual Spinel-to-Layered Transformation in LiMn2O4 Cathode Explained by Electrochemical and Thermal Stability Investigation. , 2017, ACS applied materials & interfaces.
[21] Eric A Stach,et al. Intergranular Cracking as a Major Cause of Long-Term Capacity Fading of Layered Cathodes. , 2017, Nano letters.
[22] Seung Min Kim,et al. Investigation of Thermal Stability of P2-NaxCoO2 Cathode Materials for Sodium Ion Batteries Using Real-Time Electron Microscopy. , 2017, ACS applied materials & interfaces.
[23] Fernando A. Soto,et al. Facet-Dependent Thermal Instability in LiCoO2. , 2017, Nano letters.
[24] Jianming Zheng,et al. Intragranular cracking as a critical barrier for high-voltage usage of layer-structured cathode for lithium-ion batteries , 2017, Nature Communications.
[25] M. Whittingham,et al. Tuning the Activity of Oxygen in LiNi0.8Co0.15Al0.05O2 Battery Electrodes. , 2016, ACS applied materials & interfaces.
[26] Y. Meng,et al. Performance and design considerations for lithium excess layered oxide positive electrode materials for lithium ion batteries , 2016 .
[27] I. Takeuchi,et al. Microscopy Study of Structural Evolution in Epitaxial LiCoO2 Positive Electrode Films during Electrochemical Cycling. , 2016, ACS applied materials & interfaces.
[28] Xinyi Dai,et al. Extending the High-Voltage Capacity of LiCoO2 Cathode by Direct Coating of the Composite Electrode with Li2CO3 via Magnetron Sputtering , 2016 .
[29] Daniel P. Abraham,et al. Stress Evolution in Lithium-ion Composite Electrodes during Electrochemical Cycling and Resulting Internal Pressures on the Cell Casing , 2015, 1511.02445.
[30] Seung Min Kim,et al. Using real-time electron microscopy to explore the effects of transition-metal composition on the local thermal stability in charged LixNiyMnzCo1-y-zO2 cathode materials , 2015 .
[31] Kyung Yoon Chung,et al. Investigating local degradation and thermal stability of charged nickel-based cathode materials through real-time electron microscopy. , 2014, ACS applied materials & interfaces.
[32] Andreas Jossen,et al. Impact of active material surface area on thermal stability of LiCoO2 cathode , 2014 .
[33] Zonghai Chen,et al. Development of microstrain in aged lithium transition metal oxides. , 2014, Nano letters.
[34] Amartya Mukhopadhyay,et al. Deformation and stress in electrode materials for Li-ion batteries , 2014 .
[35] A. Mauger,et al. Synthesis, structural, magnetic and electrochemical properties of LiNi1/3Mn1/3Co1/3O2 prepared by a sol–gel method using table sugar as chelating agent , 2013 .
[36] Daniel P. Abraham,et al. Observation of Microstructural Evolution in Li Battery Cathode Oxide Particles by In Situ Electron Microscopy , 2013 .
[37] Kai Yan,et al. Designed CVD growth of graphene via process engineering. , 2013, Accounts of chemical research.
[38] Jianming Zheng,et al. Formation of the spinel phase in the layered composite cathode used in Li-ion batteries. , 2012, ACS nano.
[39] K. Amine,et al. Conflicting roles of nickel in controlling cathode performance in lithium ion batteries. , 2012, Nano letters.
[40] Lijun Wu,et al. Structural Origin of Overcharge-Induced Thermal Instability of Ni-Containing Layered-Cathodes for High-Energy-Density Lithium Batteries , 2011 .
[41] Miaofang Chi,et al. Identifying surface structural changes in layered Li-excess nickel manganese oxides in high voltage lithium ion batteries: A joint experimental and theoretical study , 2011 .
[42] M. Varela,et al. Direct measurement of the low-temperature spin-state transition in LaCoO3. , 2007, Physical review letters.
[43] Gerbrand Ceder,et al. A First-Principles Approach to Studying the Thermal Stability of Oxide Cathode Materials , 2007 .
[44] M. Whittingham,et al. Lithium batteries and cathode materials. , 2004, Chemical reviews.
[45] Akira Ohtomo,et al. Atomic-scale imaging of nanoengineered oxygen vacancy profiles in SrTiO3 , 2004, Nature.
[46] Young-Il Jang,et al. TEM Study of Electrochemical Cycling‐Induced Damage and Disorder in LiCoO2 Cathodes for Rechargeable Lithium Batteries , 1999 .
[47]
John B. Goodenough,et al.
LixCoO2 (0
[48] Hakim Iddir,et al. Effect of electrolyte composition on rock salt surface degradation in NMC cathodes during high-voltage potentiostatic holds , 2019, Nano Energy.
[49] P. Novák,et al. Structural Changes and Microstrain Generated on LiNi0.80Co0.15Al0.05O2 during Cycling: Effects on the Electrochemical Performance , 2015 .