Reactive-template fabrication of porous SnO2 nanotubes and their remarkable gas-sensing performance.

A facile reactive-template strategy has been developed to fabricate porous SnO2 nanotubes using MnO2 nanorods as the sacrificial template. The formation of nanotubes is based on the redox reaction mechanism, which requires no post-treatment of the MnO2 templates. The morphological and structural characteristics of the samples have been systematically characterized by X-ray powder diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), thermal-gravimetric (TG), and N2 adsorption-desorption techniques. A gas-sensor device was constructed using as-prepared SnO2 nanotubes and was tested for its ability to detect ethanol and some other compounds. Because of the porous structure and relative large specific surface area, the SnO2 nanotube sensor manifests remarkably improved sensing performance, including fast response recovery, high sensitivity, and excellent repeatability, suggesting the promising application of the SnO2 nanotube materials.

[1]  L. Archer,et al.  Hollow Micro‐/Nanostructures: Synthesis and Applications , 2008 .

[2]  N. Bârsan,et al.  Metal oxide-based gas sensor research: How to? , 2007 .

[3]  Seong‐Hyeon Hong,et al.  SnO2 nanotubes fabricated using electrospinning and atomic layer deposition and their gas sensing performance , 2010, Nanotechnology.

[4]  Kai Zhu,et al.  Enhanced charge-collection efficiencies and light scattering in dye-sensitized solar cells using oriented TiO2 nanotubes arrays. , 2007, Nano letters.

[5]  Zhaoxiong Xie,et al.  High-sensitivity humidity sensor based on a single SnO(2) nanowire. , 2007, Journal of the American Chemical Society.

[6]  B. Liu,et al.  Salt-Assisted Deposition of SnO2 on α-MoO3 Nanorods and Fabrication of Polycrystalline SnO2 Nanotubes , 2004 .

[7]  Haidong Yu,et al.  A general low-temperature route for large-scale fabrication of highly oriented ZnO nanorod/nanotube arrays. , 2005, Journal of the American Chemical Society.

[8]  Jun Zhang,et al.  Facile synthesis of highly ethanol-sensitive SnO2 nanoparticles , 2009 .

[9]  Chen-Sheng Yeh,et al.  Hydrothermal Synthesis of SnO2 Nanoparticles and Their Gas-Sensing of Alcohol , 2007 .

[10]  Michael Tiemann,et al.  Porous metal oxides as gas sensors. , 2007, Chemistry.

[11]  Zhiyu Wang,et al.  Metal Oxide Hollow Nanostructures for Lithium‐ion Batteries , 2012, Advances in Materials.

[12]  Jun Chen,et al.  α‐Fe2O3 Nanotubes in Gas Sensor and Lithium‐Ion Battery Applications , 2005 .

[13]  Yan Li,et al.  Fabrication of ZnO nanorods and nanotubes in aqueous solutions , 2005 .

[14]  Qing Chen,et al.  Preparation and structure analysis of titanium oxide nanotubes , 2001 .

[15]  Kengo Shimanoe,et al.  Nanotubular SnO2 Templated by Cellulose Fibers: Synthesis and Gas Sensing , 2005 .

[16]  Xun Wang,et al.  Rare-Earth-compound nanowires, nanotubes, and fullerene-like nanoparticles: synthesis, characterization, and properties. , 2003, Chemistry.

[17]  Jun Zhang,et al.  3D hierarchically porous ZnO structures and their functionalization by Au nanoparticles for gas sensors , 2011 .

[18]  C. Lévy‐Clément,et al.  Conversion of ZnO Nanowires into Nanotubes with Tailored Dimensions , 2008 .

[19]  Chunjuan Tang,et al.  Controllable Preferential-Etching Synthesis and Photocatalytic Activity of Porous ZnO Nanotubes , 2008 .

[20]  Yong Wang,et al.  Highly Reversible Lithium Storage in Porous SnO2 Nanotubes with Coaxially Grown Carbon Nanotube Overlayers , 2006 .

[21]  Noboru Yamazoe,et al.  Humidity sensors: Principles and applications , 1986 .

[22]  Jian Jiang,et al.  Three-dimensional tubular arrays of MnO2–NiO nanoflakes with high areal pseudocapacitance , 2012 .

[23]  Jian Jiang,et al.  Iron Oxide-Based Nanotube Arrays Derived from Sacrificial Template-Accelerated Hydrolysis: Large-Area Design and Reversible Lithium Storage , 2010 .

[24]  Xianghong Liu,et al.  Reactive template synthesis of polypyrrole nanotubes for fabricating metal/conducting polymer nanocomposites. , 2013, Macromolecular rapid communications.

[25]  Sten-Eric Lindquist,et al.  Three-dimensional array of highly oriented crystalline ZnO microtubes , 2001 .

[26]  J. H. Lee,et al.  Gas sensors using hierarchical and hollow oxide nanostructures: Overview , 2009 .

[27]  Huijuan Zhang,et al.  Morphology-controlled synthesis of SnO(2) nanotubes by using 1D silica mesostructures as sacrificial templates and their applications in lithium-ion batteries. , 2010, Small.

[28]  Yong Wang,et al.  Polycrystalline SnO2 Nanotubes Prepared via Infiltration Casting of Nanocrystallites and Their Electrochemical Application , 2005 .

[29]  S. Mathur,et al.  Synthesis, Characterization, and Gas Sensing Properties of Porous Nickel Oxide Nanotubes , 2011 .

[30]  Jun Zhang,et al.  Hierarchically Porous ZnO Architectures for Gas Sensor Application , 2009 .

[31]  Yong Jia,et al.  Preparation of Porous Tin Oxide Nanotubes Using Carbon Nanotubes as Templates and Their Gas-Sensing Properties , 2009 .

[32]  Jing Liang,et al.  Template-Directed Materials for Rechargeable Lithium-Ion Batteries† , 2008 .

[33]  Norio Miura,et al.  Relationship between ethanol gas sensitivity and surface catalytic property of tin oxide sensors modified with acidic or basic oxides , 2000 .