Performance of a PV module integrated with standalone building in hot arid areas as enhanced by surface cooling and cleaning

Abstract This study investigated experimentally the performance due to automatic cooling and surface cleaning of Photovoltaic (PV) module installed on the roof of a building in hot arid area as compared with that of a module without cooling and cleaning. The module cooling is controlled automatically according to the rear side temperature via rejection of none-converted solar-energy to the ambient to keep the PV module surface temperature always close to the ambient temperature. In addition, this system controls the cleaning period of the module front surface. The results showed a decrease of about 45.5% and 39% in module temperature at front and rear faces, respectively. Consequently, the cooled and surface cleaned module has an efficiency of 11.7% against 9% for the module without cooling and cleaning. Moreover, the maximum output power produced by cooled and cleaned module is 89.4 W against 68.4 W for non-cooled and non-cleaned module.

[1]  Fang Tang,et al.  Performance evaluations and applications of photovoltaic–thermal collectors and systems , 2014 .

[2]  Azadeh Kordzadeh,et al.  The effects of nominal power of array and system head on the operation of photovoltaic water pumping set with array surface covered by a film of water , 2010 .

[3]  Dennis L. Loveday,et al.  Cooling potential of ventilated PV façade and solar air heaters combined with a desiccant cooling machine , 2006 .

[4]  Morteza Abdolzadeh,et al.  Improving the effectiveness of a photovoltaic water pumping system by spraying water over the front of photovoltaic cells , 2009 .

[5]  Mohammad Nurul Alam Hawlader,et al.  An active cooling system for photovoltaic modules , 2012 .

[6]  Karima E. Amori,et al.  Analysis of thermal and electrical performance of a hybrid (PV/T) air based solar collector for Iraq , 2012 .

[7]  Jihuan Xu,et al.  Design, fabrication and experimental study of a solar photovoltaic/loop-heat-pipe based heat pump system , 2013 .

[8]  Masoud Rahimi,et al.  Application of two-phase flow for cooling of hybrid microchannel PV cells: A comparative study , 2013 .

[9]  T. Senthilkumar,et al.  Passive cooling of standalone flat PV module with cotton wick structures , 2013 .

[10]  M. Chandrasekar,et al.  A review on the thermal regulation techniques for non integrated flat PV modules mounted on building top , 2015 .

[11]  Kamaruzzaman Sopian,et al.  Design development and performance evaluation of photovoltaic/thermal (PV/T) air base solar collector , 2013 .

[12]  Stephan Paredes,et al.  Exergoeconomic analysis of high concentration photovoltaic thermal co-generation system for space cooling , 2014 .

[13]  S. Krauter.  Increased electrical yield via water flow over the front of photovoltaic panels , 2004 .

[14]  Kamaruzzaman Sopian,et al.  Recent advances in flat plate photovoltaic/thermal (PV/T) solar collectors , 2011 .

[15]  Christos N. Markides,et al.  A UK-based assessment of hybrid PV and solar-thermal systems for domestic heating and power: System performance , 2014 .

[16]  J. Garant,et al.  Design and performance of a novel building integrated PV/thermal system for energy efficiency of buildings , 2013 .

[17]  Zhang Tao,et al.  Annual analysis of heat pipe PV/T systems for domestic hot water and electricity production , 2012 .

[18]  Abdul Hai Alami,et al.  Effects of evaporative cooling on efficiency of photovoltaic modules , 2014 .

[19]  Cecilia Rossi,et al.  Experimental and numerical results from hybrid retrofitted photovoltaic panels , 2013 .

[20]  Ahmed Hamza H. Ali,et al.  Effect of dust deposition on performance of thin film photovoltaic module in harsh humid climate , 2013, 2013 International Conference on Renewable Energy Research and Applications (ICRERA).

[21]  Hua Chun Zeng,et al.  Self-cleaning and antireflective packaging glass for solar modules , 2011 .

[22]  Luca A. Tagliafico,et al.  Dynamic thermal models and CFD analysis for flat-plate thermal solar collectors - A review , 2014 .

[23]  K. Touafek,et al.  Theoretical and experimental study of sheet and tubes hybrid PVT collector , 2014 .

[24]  Y. Tripanagnostopoulos,et al.  Performance improvement of PV/T solar collectors with natural air flow operation , 2008 .

[25]  Shafiqur Rehman,et al.  Performance evaluation of a PV (photovoltaic) module by back surface water cooling for hot climatic conditions , 2013 .