Transport Phenomena in Picoliter Size Solder Droplet Dispension

This paper presents a study of the fluid dynamics and heat transfer phenomena occurring during the impingement of a picoliter size liquid solder droplet upon a multilayer, composite substrate. The theoretical model, based on the Lagrangian formulation, is solved numerically with the finite element method. A deforming mesh is utilized to accurately simulate the large deformations, as well as the domain nonuniformities characteristic of the spreading process. The occurrences of droplet recoiling and mass accumulation around the deposit periphery are features of the numerical simulations and yield a nonmonotonic dependence of the maximum radius on time. The results also document the transient temperature fields developing in both the solder droplet and the substrate during the impingement process. Convection effects on the temperature field development in a deforming droplet are found to be important for the entire history of spreading. The work is directly applicable to the miniature solder droplet dispension technology for the mounting of microscopic electronic components on various substrates under development at MicroFab Inc. The results of the numerical simulations are used to explain the shape of solidified microscopic solder bumps.

[1]  D. A. Field Laplacian smoothing and Delaunay triangulations , 1988 .

[2]  Mutsuto Kawahara,et al.  A finite element method for high Reynolds number viscous fluid flow using two step explicit scheme , 1983 .

[3]  H. Jones,et al.  REVIEW ARTICLE: Cooling, freezing and substrate impact of droplets formed by rotary atomization , 1971 .

[4]  C. S Frederiksen,et al.  Finite-element method for time-dependent incompressible free surface flow , 1981 .

[5]  Michael J. Miksis,et al.  The effect of the contact line on droplet spreading , 1991, Journal of Fluid Mechanics.

[6]  Gerardo Trapaga,et al.  Mathematical modeling of the isothermal impingement of liquid droplets in spraying processes , 1991 .

[7]  O. Hassager,et al.  An algorithm for the use of the Lagrangian specification in Newtonian fluid mechanics and applications to free-surface flow , 1985, Journal of Fluid Mechanics.

[8]  Francis H. Harlow,et al.  The Splash of a Liquid Drop , 1967 .

[9]  E. Matthys,et al.  Modelling of heat transfer and solidification during splat cooling : effect of splat thickness and splat/substrate thermal contact , 1991 .

[10]  Dimos Poulikakos,et al.  Modeling of the deformation of a liquid droplet impinging upon a flat surface , 1993 .

[11]  O. C. Zienkiewicz,et al.  Adaptive remeshing for compressible flow computations , 1987 .

[12]  J. Madejski,et al.  Solidification of droplets on a cold surface , 1976 .

[13]  C. W. Hirt,et al.  Adding limited compressibility to incompressible hydrocodes , 1980 .

[14]  R. Collins Bandwidth reduction by automatic renumbering , 1973 .

[15]  L. Scriven,et al.  Hydrodynamic Model of Steady Movement of a Solid / Liquid / Fluid Contact Line , 1971 .

[16]  Dimos Poulikakos,et al.  Wetting effects on the spreading of a liquid droplet colliding with a flat surface: Experiment and modeling , 1995 .

[17]  F. Harlow,et al.  Numerical Calculation of Time‐Dependent Viscous Incompressible Flow of Fluid with Free Surface , 1965 .

[18]  J. Madejski,et al.  Droplets on impact with a solid surface , 1983 .

[19]  L. Scriven,et al.  Separating how near a static contact line: Slip at a wall and shape of a free surface , 1980 .

[20]  E. B. Dussan,et al.  LIQUIDS ON SOLID SURFACES: STATIC AND DYNAMIC CONTACT LINES , 1979 .