The Provision of Toughness in One and Two Phase Polymers

Abstract

[1]  S. Newman,et al.  Optical studies of crazed plastic surfaces , 1957 .

[2]  H. Tattersall,et al.  The work of fracture and its measurement in metals, ceramics and other materials , 1966 .

[3]  M. Narkis,et al.  A deformational mechanism in particulate‐filled glassy polymers , 1973 .

[4]  A. Cross,et al.  The effect of thermal pretreatment on the mechanical properties of polycarbonate , 1975 .

[5]  R. Kambour,et al.  Electron microscopy of crazes in polystyrene and rubber modified polystyrene: use of iodine-sulphur eutectic as a craze reinforcing impregnant , 1971 .

[6]  R. Kambour.  Structure and properties of crazes in polycarbonate and other glassy polymers , 1964 .

[7]  C. Bucknall,et al.  Stress-whitening in high-impact polystyrenes , 1965 .

[8]  R. N. Haward,et al.  Effect of an elastomeric phase on the properties of rigid thermoplastics , 1970 .

[9]  H. L. Williams,et al.  Molecular motions in bisphenol a polycarbonates as measured by pulsed NMR techniques. I. Homopolymers and copolymers , 1974 .

[10]  D. Hull,et al.  The morphology of crazes in polystyrene , 1971 .

[11]  L. C. Cessna.  Dilatometric studies of polymers undergoing high and low rate tensile deformation , 1974 .

[12]  C. Bucknall,et al.  Rubber-toughening of plastics , 1972 .

[13]  J. G. Williams,et al.  The determination of the fracture parameters for polymers in impact , 1975 .

[14]  P. Vincent.  Impact strength and mechanical losses in thermoplastics , 1974 .

[15]  R. N. Haward,et al.  The fracture surfaces of polystyrenes having different molecular weights , 1969 .

[16]  N. J. Mills.  Dugdale yielded zones in cracked sheets of glassy polymers , 1974 .

[17]  R. F. Boyer.  Dependence of mechanical properties on molecular motion in polymers , 1968 .

[18]  P. Vincent.  The necking and cold-drawing of rigid plastics , 1960 .

[19]  R. E. Robertson,et al.  The Physics of Glassy Polymers , 1973 .

[20]  M. Huggins.  The Physical Properties of Polymers. , 1959 .

[21]  C. Bucknall,et al.  Fracture behavior of rubber‐modified thermoplastics after aging , 1968 .

[22]  D. R. J. Owen,et al.  The yielding of a two-dimensional void assembly in an organic glass , 1973 .

[23]  H. Brown.  A critical examination of the impact test for glassy polymers , 1973 .

[24]  J. Mann,et al.  Reinforced thermoplastics , 1964, Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences.

[25]  P. Bowden.  A criterion for inhomogeneous plastic deformation , 1970 .

[26]  P. W. Preston.  THE IMPACT MODULUS OF GLASS1 , 1931 .

[27]  J. G. Williams,et al.  Fracture toughness and absorbed energy measurements in impact tests on brittle materials , 1973 .

[28]  G. Thackray,et al.  The use of a mathematical model to describe isothermal stress-strain curves in glassy thermoplastics , 1968, Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences.

[29]  G. Yeh,et al.  Origin of Impact Strength in Polycarbonate: II. Effect of Thermal Treatments , 1974 .

[30]  G. Allen,et al.  The impact strength of polycarbonate , 1973 .

[31]  XCIV. The behaviour of glass under impact and static loading , 1945 .

[32]  R. Kambour,et al.  A review of crazing and fracture in thermoplastics , 1973 .

[33]  E. Hazell,et al.  The effect of thermal pretreatment on the strength of polycarbonate , 1967 .