A prognostic method for fault detection in wind turbine drivetrains

Abstract In this paper, a prognostic method is presented for fault detection in gears and bearings in wind turbine drivetrains. This method is based on angular velocity measurements from the gearbox input shaft and the output to the generator, using two additional angular velocity sensors on the intermediate shafts inside the gearbox. An angular velocity error function is defined and compared in the faulty and fault-free conditions in frequency domain. Faults can be detected from the change in the energy level of the frequency spectrum of an error function. The method is demonstrated by detecting bearing faults in three locations: the high-speed shaft stage, the planetary stage and the intermediate-speed shaft stage. Simulations of the faulty and fault-free cases are performed on a gearbox model implemented in multibody dynamic simulation software. The global loads on the gearbox are obtained from a dynamometer test bench and applied to the numerical gearbox model. The method is exemplified using a 750 kW wind turbine gearbox. The case study results show that defects in the high- and intermediate-speed bearings can be detected using this method. It is shown that this procedure is relatively simple, yet accurate enough for early fault detection in wind turbine gearboxes.

[1]  D. W. Dudley,et al.  Dudley's Gear Handbook , 1991 .

[2]  Torgeir Moan,et al.  Multi‐body modelling and analysis of a planet carrier in a wind turbine gearbox , 2013 .

[3]  Torgeir Moan,et al.  Long-term analysis of gear loads in fixed offshore wind turbines considering ultimate operational loadings , 2013 .

[4]  J. D. Smith,et al.  Gear Noise and Vibration , 1999 .

[5]  Zhengjia He,et al.  A new noise-controlled second-order enhanced stochastic resonance method with its application in wind turbine drivetrain fault diagnosis , 2013 .

[6]  Torgeir Moan,et al.  Time domain-based gear contact fatigue analysis of a wind turbine drivetrain under dynamic conditions , 2013 .

[7]  Sung-Hoon Ahn,et al.  Condition monitoring and fault detection of wind turbines and related algorithms: A review , 2009 .

[8]  R. Parker,et al.  Dynamic Response of a Planetary Gear System Using a Finite Element/Contact Mechanics Model , 2000 .

[9]  M. Elforjani,et al.  Natural mechanical degradation measurements in slow speed bearings , 2009 .

[10]  F. Oyague,et al.  NREL Gearbox Reliability Collaborative Analysis Round Robin: Preprint , 2009 .

[11]  Wenxian Yang,et al.  Cost-Effective Condition Monitoring for Wind Turbines , 2010, IEEE Transactions on Industrial Electronics.

[12]  Nguyễn Huy Mỹ.  International Federation of Automatic Control (IFAC) , 2015 .

[13]  T. A. Harris,et al.  Essential Concepts of Bearing Technology , 2006 .

[14]  W. LaCava,et al.  Gearbox Reliability Collaborative Project Report: Findings from Phase 1 and Phase 2 Testing , 2011 .

[15]  Mayorkinos Papaelias,et al.  Condition monitoring of wind turbines: Techniques and methods , 2012 .

[16]  Torgeir Moan,et al.  Fatigue Reliability-based Inspection and Maintenance Planning of Gearbox Components in Wind Turbine Drivetrains , 2014 .

[17]  F. Litvin,et al.  Gear geometry and applied theory , 1994 .

[18]  L. Pintelon,et al.  Maintenance: An Evolutionary Perspective , 2008 .

[19]  Peter Fogh Odgaard,et al.  Fault tolerant control of wind turbines: a benchmark model , 2009 .

[20]  S. Sheng,et al.  Gearbox Reliability Collaborative Analysis Round Robin: Preprint , 2009 .

[21]  Torgeir Moan,et al.  Effects of floating sun gear in a wind turbine's planetary gearbox with geometrical imperfections , 2015 .

[22]  Torgeir Moan,et al.  Long‐term contact fatigue analysis of a planetary bearing in a land‐based wind turbine drivetrain , 2015 .

[23]  Sachin Sharma,et al.  Condition Monitoring of Wind Turbines: A Review , 2013 .

[24]  Torgeir Moan,et al.  Modelling and analysis of floating spar-type wind turbine drivetrain , 2014 .

[25]  Peter Fogh Odgaard,et al.  Frequency Based Fault Detection in Wind Turbines , 2014 .

[26]  Torgeir Moan,et al.  On long-term fatigue damage and reliability analysis of gears under wind loads in offshore wind turbine drivetrains , 2014 .

[27]  Ahmet Kahraman,et al.  A deformable body dynamic analysis of planetary gears with thin rims , 2003 .

[28]  Zhipeng Feng,et al.  Fault diagnosis for wind turbine planetary gearboxes via demodulation analysis based on ensemble empirical mode decomposition and energy separation , 2012 .

[29]  Mohd. Zaki Nuawi,et al.  Facile wear failure monitoring of commercial bearing alloys using I-kaz method , 2013 .

[30]  Brian C. Boguski.  An Experimental Investigation of the System-Level Behavior of Planetary Gear Sets , 2010 .

[31]  Bertrand Raison,et al.  Models for bearing damage detection in induction motors using stator current monitoring , 2008, 2004 IEEE International Symposium on Industrial Electronics.

[32]  Robert B. Randall,et al.  Detection and diagnosis of incipient bearing failure in helicopter gearboxes , 2004 .

[33]  Wenyi Liu,et al.  A new wind turbine fault diagnosis method based on the local mean decomposition , 2012 .

[34]  Cheng-Kang Lee,et al.  Manufacturing process for a cylindrical crown gear drive with a controllable fourth order polynomial function of transmission error , 2009 .

[35]  Ahmet Kahraman,et al.  Dynamic tooth loads of planetary gear sets having tooth profile wear , 2004 .