Dynamic isotropy in 6-DOF kinematically constrained platforms by three elastic nodal joints

[1]  Thomson and Tait's Natural Philosophy , 1879, Science.

[2]  J. Maxwell.  The Scientific Papers of James Clerk Maxwell , 2009 .

[3]  D. Stewart.  A Platform with Six Degrees of Freedom , 1965 .

[4]  Alexander H. Slocum,et al.  Kinematic couplings for precision fixturing — Part 2: Experimental determination of repeatability and stiffness , 1988 .

[5]  A. Slocum.  Kinematic couplings for precision fixturing—Part I: Formulation of design parameters , 1988 .

[6]  Chris Evans,et al.  Precision engineering : an evolutionary view , 1989 .

[7]  Alexander H. Slocum,et al.  Design of three-groove kinematic couplings , 1992 .

[8]  Pcjn Nick Rosielle,et al.  Design of a kinematic coupling for precision applications , 1997 .

[9]  Layton C. Hale.  Friction-based design of kinematic couplings , 1998 .

[10]  Mmpa Marc Vermeulen,et al.  Design for precision : current status and trends , 1998 .

[11]  Bhaskar Dasgupta,et al.  The Stewart platform manipulator: a review , 2000 .

[12]  Layton C. Hale,et al.  Optimal design techniques for kinematic couplings , 2001 .

[13]  Anastasios John Hart.  Design and analysis of kinematic couplings for modular machine and instrument structures , 2002 .

[14]  Martin L. Culpepper,et al.  Design of quasi-kinematic couplings , 2004 .

[15]  Mathieu Barraja,et al.  Tolerancing kinematic couplings , 2005 .

[16]  Martin L. Culpepper,et al.  Design of integrated eccentric mechanisms and exact constraint fixtures for micron-level repeatability and accuracy , 2005 .

[17]  I-Ming Chen,et al.  Stiffness modeling of flexure parallel mechanism , 2005 .

[18]  Jian S. Dai,et al.  Compliance Analysis of a Three-Legged Rigidly-Connected Platform Device , 2006 .

[19]  Zhenqi Zhu,et al.  Error Modeling and Accuracy of Parallel Industrial Robots , 2006 .

[20]  John C. Ziegert,et al.  Air bearing kinematic couplings , 2007 .

[21]  Dannis Michel Brouwer,et al.  6-DoFs MEMS-based precision manipulators , 2008 .

[22]  A. Ghosal,et al.  An algebraic formulation of static isotropy and design of statically isotropic 6–6 Stewart platform manipulators , 2009 .

[23]  M. Mahboubkhah,et al.  A comprehensive study on the free vibration of machine tools’ hexapod table , 2009 .

[24]  Dan Zhang,et al.  Parallel Robotic Machine Tools , 2009 .

[25]  P. Bely.  The Design and Construction of Large Optical Telescopes , 2010 .

[26]  I. Fassi,et al.  The “point of isotropy” and other properties of serial and parallel manipulators , 2010 .

[27]  Jing-feng He,et al.  Characteristics analysis of joint space inverse mass matrix for the optimal design of a 6-DOF parallel manipulator , 2010 .

[28]  Alexander H. Slocum,et al.  Kinematic couplings: A review of design principles and applications , 2010 .

[29]  Jonathan B. Hopkins,et al.  Synthesis of multi-degree of freedom, parallel flexure system concepts via freedom and constraint topology (FACT). Part II: Practice , 2010 .

[30]  S. D'Orsi,et al.  Active optics control of VST telescope secondary mirror. , 2010, Applied optics.

[31]  Ed Hileman,et al.  LSST telescope primary/tertiary mirror hardpoints , 2010, Astronomical Telescopes + Instrumentation.

[32]  James Clerk Maxwell,et al.  The Scientific Papers of James Clerk Maxwell: Frontmatter , 2011 .

[33]  Jing-feng He,et al.  Dynamic isotropic design of a class of Gough–Stewart parallel manipulators lying on a circular hyperboloid of one sheet , 2011 .

[34]  Jonathan B. Hopkins,et al.  Synthesis of precision serial flexure systems using freedom and constraint topologies (FACT) , 2011 .

[35]  Wei Wang,et al.  Dynamic isotropic design for modified Gough–Stewart platforms lying on a pair of circular hyperboloids , 2011 .

[36]  Torben Andersen,et al.  Integrated Modeling of Telescopes , 2011 .

[37]  Yongsheng Zhao,et al.  Spatially isotropic configuration of Stewart platform-based force sensor , 2011 .

[38]  Guangren Duan,et al.  Optimal design of a class of generalized symmetric Gough-Stewart parallel manipulators with dynamic isotropy and singularity-free workspace , 2012, Robotica.

[39]  Jing-feng He,et al.  Study on dynamic isotropy of a class of symmetric spatial parallel mechanisms with actuation redundancy , 2012 .

[40]  David S. Ashby,et al.  Recent performance improvements for the Large Binocular Telescope primary mirror system , 2012, Other Conferences.

[41]  Layton Carter Hale,et al.  Principles and Techniques for Designing Precision Machines , 2013 .

[42]  John E. McInroy,et al.  Designing dynamics and control of isotropic Gough-Stewart micromanipulators , 2013, 2013 IEEE International Conference on Robotics and Automation.

[43]  Behrouz Afzali-Far,et al.  Parametric damped vibrations of Gough–Stewart platforms for symmetric configurations , 2014 .

[44]  Behrouz Afzali-Far,et al.  A Joint-Space Parametric Formulation for the Vibrations of Symmetric Gough-Stewart Platforms , 2014, ICSEng.

[45]  Grzegorz Chmaj,et al.  Progress in Systems Engineering - Proceedings of the Twenty-Third International Conference on Systems Engineering, ICSEng 2014, Las Vegas, NV, USA, August 19-21, 2014 , 2014, ICSEng.

[46]  Behrouz Afzali-Far,et al.  Influence of strut inertia on the vibrations in initially symmetric Gough-Stewart Platforms-an analytical study , 2015 .

[47]  Per Lidström,et al.  A Class of Generalized Gough-Stewart Platforms Used for Effectively Obtaining Dynamic Isotropy – An Analytical Study , 2015 .

[48]  Metin Sitti,et al.  Integrating mechanism synthesis and topological optimization technique for stiffness-oriented design of a three degrees-of-freedom flexure-based parallel mechanism , 2015 .

[49]  B Afzali-Far,et al.  Coordinate representations for rigid parts in multibody dynamics , 2016 .