Current status and challenges for automotive battery production technologies

[1]  Wolfgang Haselrieder,et al.  Characterization of the calendering process for compaction of electrodes for lithium-ion batteries , 2017 .

[2]  X. Su,et al.  Recent advancement of SiOx based anodes for lithium-ion batteries , 2017 .

[3]  P. Scharfer,et al.  Impact of drying conditions and wet film properties on adhesion and film solidification of lithium-ion battery anodes , 2017 .

[4]  Partha P. Mukherjee,et al.  Enabling aqueous processing for crack-free thick electrodes , 2017 .

[5]  T. Chen,et al.  Solvent-free dry powder coating process for low-cost manufacturing of LiNi1/3Mn1/3Co1/3O2 cathodes in lithium-ion batteries , 2017 .

[6]  Yongzhu Fu,et al.  Geometric and Electrochemical Characteristics of LiNi1/3Mn1/3Co1/3O2 Electrode with Different Calendering Conditions , 2017 .

[7]  Zhijia Du,et al.  Fast formation cycling for lithium ion batteries , 2017 .

[8]  P. Scharfer,et al.  Development of a three-stage drying profile based on characteristic drying stages for lithium-ion battery anodes , 2017 .

[9]  A. Kwade,et al.  Structural and Electrochemical Properties of Calendered Lithium Manganese Oxide Cathodes , 2016 .

[10]  A. Schilling,et al.  Analyzing Bending Stresses on Lithium‐Ion Battery Cathodes induced by the Assembly Process , 2016 .

[11]  G. Reinhart,et al.  In situ visualization of the electrolyte solvent filling process by neutron radiography , 2016 .

[12]  Paul A. Nelson,et al.  Study of a dry room in a battery manufacturing plant using a process model , 2016 .

[13]  Wolfgang Haselrieder,et al.  Intensive powder mixing for dry dispersing of carbon black and its relevance for lithium-ion battery cathodes , 2016 .

[14]  Arno Kwade,et al.  The interaction of consecutive process steps in the manufacturing of lithium-ion battery electrodes with regard to structural and electrochemical properties , 2016 .

[15]  Arno Kwade,et al.  Smart Electrode Processing for Battery Cost Reduction , 2016 .

[16]  Hao Wen,et al.  Evaluation of Si-Based Cells and the Importance of Scale-up , 2016 .

[17]  D. Dees,et al.  Energy impact of cathode drying and solvent recovery during lithium-ion battery manufacturing , 2016 .

[18]  Hubert A. Gasteiger,et al.  The Manufacturing of Electrodes: Key Process for the Future Success of Lithium-Ion Batteries , 2016 .

[19]  Ajay Kapoor,et al.  Review of mechanical design and strategic placement technique of a robust battery pack for electric vehicles , 2016 .

[20]  W. Bauer,et al.  Investigation of film solidification and binder migration during drying of Li-Ion battery anodes , 2016 .

[21]  P. Scharfer,et al.  Slot die coating of lithium-ion battery electrodes: investigations on edge effect issues for stripe and pattern coatings , 2016, Journal of Coatings Technology and Research.

[22]  Haihui Wang,et al.  Enhancement on the wettability of lithium battery separator toward nonaqueous electrolytes , 2016 .

[23]  Doron Aurbach,et al.  Promise and reality of post-lithium-ion batteries with high energy densities , 2016 .

[24]  H. Pan,et al.  Solvent-Free Manufacturing of Electrodes for Lithium-ion Batteries , 2016, Scientific Reports.

[25]  T. Basak,et al.  A review on the susceptor assisted microwave processing of materials , 2016 .

[26]  C. Tiu,et al.  Improvement of lithium-ion battery performance using a two-layered cathode by simultaneous slot-die coating , 2016 .

[27]  Lip Huat Saw,et al.  Integration issues of lithium-ion battery into electric vehicles battery pack , 2016 .

[28]  R. Peelamedu,et al.  Performance Study of Li-ion Battery Electrodes Dried Using Inline Microwave Hybrid System , 2015 .

[29]  Alexander H. Slocum,et al.  Component-cost and performance based comparison of flow and static batteries , 2015 .

[30]  Gunther Reinhart,et al.  Electrolyte Filling of Large-Scale Lithium-Ion Batteries: Challenges for Production Technology and Possible Approaches , 2015 .

[31]  Wolfgang Haselrieder,et al.  Discontinuous and Continuous Processing of Low-Solvent Battery Slurries for Lithium Nickel Cobalt Manganese Oxide Electrodes , 2015, Journal of Electronic Materials.

[32]  H. Nirschl,et al.  Influence of dry mixing and distribution of conductive additives in cathodes for lithium ion batteries , 2015 .

[33]  H. Nirschl,et al.  Challenges in Lithium‐Ion‐Battery Slurry Preparation and Potential of Modifying Electrode Structures by Different Mixing Processes , 2015 .

[34]  Wolfgang Haselrieder,et al.  Measuring the coating adhesion strength of electrodes for lithium-ion batteries , 2015 .

[35]  Kevin G. Gallagher,et al.  Cost savings for manufacturing lithium batteries in a flexible plant , 2015 .

[36]  A. Mohamed,et al.  Superhydrophobic and Corrosion Behavior of Electrospun PVDF-ZnO Coating , 2015 .

[37]  Wolfgang Haselrieder,et al.  Influence of Convective Drying Parameters on Electrode Performance and Physical Electrode Properties , 2015 .

[38]  Y. Nagata,et al.  Effect of Electrode Mixing Conditions on the Performance of Lithium-Ion Batteries Analyzed by Fast Fourier Transform Electrochemical Impedance Spectroscopy , 2015 .

[39]  Claus Daniel,et al.  Prospects for reducing the processing cost of lithium ion batteries , 2015 .

[40]  S. Martinet,et al.  Cost modeling of lithium‐ion battery cells for automotive applications , 2015 .

[41]  V. Battaglia,et al.  Mesoscale elucidation of the influence of mixing sequence in electrode processing. , 2014, Langmuir : the ACS journal of surfaces and colloids.

[42]  Margret Wohlfahrt-Mehrens,et al.  Influence of formulation method and related processes on structural, electrical and electrochemical properties of LMS/NCA-blend electrodes , 2014 .

[43]  R. Juang,et al.  Low-pressure ethane/nitrogen gas mixture plasma surface modification effect on the wetting and electrochemical performance of polymeric separator for lithium-ion batteries , 2014 .

[44]  B. Bitsch,et al.  A novel slurry concept for the fabrication of lithium-ion battery electrodes with beneficial properties , 2014 .

[45]  H. Sirringhaus,et al.  All‐Inkjet‐Printed, All‐Air‐Processed Solar Cells , 2014 .

[46]  C. Tiu,et al.  An Effective Mixing for Lithium Ion Battery Slurries , 2014 .

[47]  Wilhelm Pfleging,et al.  A new approach for rapid electrolyte wetting in tape cast electrodes for lithium-ion batteries , 2014 .

[48]  P. Mukherjee,et al.  Microstructure Evolution in Lithium-Ion Battery Electrode Processing , 2014 .

[49]  B. Polzin,et al.  From coin cells to 400 mAh pouch cells: Enhancing performance of high-capacity lithium-ion cells via modifications in electrode constitution and fabrication , 2014 .

[50]  Martin Ebner,et al.  Tortuosity Anisotropy in Lithium‐Ion Battery Electrodes , 2014 .

[51]  F. Huang.  CHAPTER 1: WHAT IS BIOMASS , 2014 .

[52]  Yoon-Soo Park,et al.  Effect of polymeric binder type on the thermal stability and tolerance to roll-pressing of spherical natural graphite anodes for Li-ion batteries , 2014 .

[53]  J. Youn,et al.  Evaluation of slurry characteristics for rechargeable lithium-ion batteries , 2013 .

[54]  Wolfgang Haselrieder,et al.  Impact of the Calendering Process on the Interfacial Structure and the Related Electrochemical Performance of Secondary Lithium-Ion Batteries , 2013 .

[55]  M. Winter,et al.  Electrochemical Intercalation of Bis(Trifluoromethanesulfonyl) Imide Anion into Various Graphites for Dual-Ion Cells , 2013 .

[56]  Margret Wohlfahrt-Mehrens,et al.  Influence of electrode preparation on the electrochemical performance of LiNi0.8Co0.15Al0.05O2 composite electrodes for lithium-ion batteries , 2012 .

[57]  Xiangyun Song,et al.  Calendering effects on the physical and electrochemical properties of Li[Ni1/3Mn1/3Co1/3]O2 cathode , 2012 .

[58]  J. Salminen,et al.  Lithium ion battery production , 2012 .

[59]  Ann Marie Sastry,et al.  Porous cathode optimization for lithium cells: Ionic and electronic conductivity, capacity, and selection of materials , 2010 .

[60]  P. Novák,et al.  Electrode engineering of nanoparticles for lithium-ion batteries—Role of dispersion technique , 2009 .

[61]  Robert Dominko,et al.  Electrochemical binding and wiring in battery materials , 2008 .

[62]  John Newman,et al.  Two-Dimensional Modeling of Lithium Deposition during Cell Charging , 2008 .

[63]  Shengbo Zhang.  A review on the separators of liquid electrolyte Li-ion batteries , 2007 .

[64]  Soon Ho Chang,et al.  Effect of mixing sequences on the electrode characteristics of lithium-ion rechargeable batteries , 1999 .

[65]  Muhammed Aydemir,et al.  Increasing productivity in assembling z-folded electrode-separator-composites for lithium-ion batteries , 2017 .

[66]  J. Diekmann,et al.  Ecological Recycling of Lithium-Ion Batteries from Electric Vehicles with Focus on Mechanical Processes , 2017 .

[67]  Kevin G. Gallagher,et al.  Optimizing areal capacities through understanding the limitations of lithium-ion electrodes , 2016 .

[68]  Thomas Knoche,et al.  A Process Model for the Electrolyte Filling of Lithium-ion Batteries , 2016 .

[69]  Jürgen Fleischer,et al.  Integrated cut and place module for high productive manufacturing of lithium-ion cells , 2014 .

[70]  H. Hagiwara,et al.  A Raman spectroscopic method to find binder distribution in electrodes during drying , 2013, Journal of Coatings Technology and Research.

[71]  Hui Wang,et al.  Benchmarking of High Capacity Battery Module/Pack Design for Automatic Assembly System , 2010 .

[72]  Wayne W. Cai,et al.  Joining Technologies for Automotive Lithium-Ion Battery Manufacturing: A Review , 2010 .

[73]  M. Yoshio,et al.  Lithium-ion batteries , 2009 .

[74]  K. Miyanami,et al.  Kneading and dispersion of positive electrode materials in a lithium ion secondary battery for high-density film , 2002 .