Corrosion and passive behavior of Al0.8CrFeNi2.2 eutectic high entropy alloy in different media
暂无分享,去创建一个
M. Zhang | A. Lan | Xi Jin | J. Qiao | Huijun Yang | Xialing Wan
[1] P. P. Bhattacharjee,et al. Superior strength-ductility synergy of a cost-effective AlCrFe2Ni2 high entropy alloy with heterogeneous microstructure processed by moderate cryo-rolling and annealing , 2022, Materials Letters.
[2] Liangtian Wei,et al. Corrosion mechanism of eutectic high-entropy alloy induced by micro-galvanic corrosion in sulfuric acid solution , 2022, Corrosion Science.
[3] E. Trofimov,et al. Corrosion Resistance of AlxCoCrFeNiM (M = Ti, V, Si, Mn, Cu) High Entropy Alloys in NaCl and H2SO4 Solutions , 2022, Metals.
[4] Yu Fu,et al. Effect of annealing temperatures on microstructural evolution and corrosion behavior of Ti-Mo titanium alloy in hydrochloric acid , 2022, Corrosion Science.
[5] S. Malladi,et al. Development of ultrafine grained cobalt-free AlCrFe2Ni2 high entropy alloy with superior mechanical properties by thermo-mechanical processing , 2021, Materials Science and Engineering: A.
[6] Xiaogang Li,et al. The corrosion behavior and film properties of Al-containing high-entropy alloys in acidic solutions , 2021 .
[7] Y. Liu,et al. Al0.3CrxFeCoNi high-entropy alloys with high corrosion resistance and good mechanical properties , 2021 .
[8] J. Yeh,et al. High entropy alloys: Key issues under passionate debate , 2020, Scripta Materialia.
[9] Xinyun Wang,et al. Effect of the grain size on the corrosion behavior of CoCrFeMnNi HEAs in a 0.5 M H2SO4 solution , 2020 .
[10] J. Qiao,et al. Comparison of electrochemical behaviour between La-free and La-containing CrMnFeNi HEA by Mott–Schottky analysis and EIS measurements , 2020, Corrosion Engineering, Science and Technology.
[11] Yang Yu,et al. Comparison of the corrosion and passivity behavior between CrMnFeCoNi and CrFeCoNi coatings prepared by argon arc cladding , 2020 .
[12] H. Hou,et al. Evolution of mechanical properties and corrosion resistance of Al0.6CoFeNiCr0.4 high-entropy alloys at different heat treatment temperature , 2020 .
[13] S. Shi,et al. Corrosion resistant nanostructured eutectic high entropy alloy , 2020 .
[14] Xiaogang Li,et al. Influence of carbon on the corrosion behaviour of interstitial equiatomic CoCrFeMnNi high-entropy alloys in a chlorinated concrete solution , 2020 .
[15] Jiangtao Li,et al. Effect of Mo and aging temperature on corrosion behavior of (CoCrFeNi)100-Mo high-entropy alloys , 2020 .
[16] R. Idouhli,et al. Semiconducting behavior and kinetics of passive film growth on AISI 321 stainless steel in sulfuric acid , 2019, Corrosion Reviews.
[17] S. Mukherjee,et al. Galvanic corrosion in a eutectic high entropy alloy , 2019, Journal of Electroanalytical Chemistry.
[18] Juan Xu,et al. Microstructure, mechanical properties and corrosion resistance of CoCrFeNiW (x = 0, 0.2, 0.5) high entropy alloys , 2019, Intermetallics.
[19] S. Yen,et al. Corrosion mechanism of annealed equiatomic AlCoCrFeNi tri-phase high-entropy alloy in 0.5 M H2SO4 aerated aqueous solution , 2019, Corrosion Science.
[20] N. Tsuji,et al. Nanostructuring with Structural-Compositional Dual Heterogeneities Enhances Strength-Ductility Synergy in Eutectic High Entropy Alloy , 2019, Scientific Reports.
[21] Dierk Raabe,et al. High-entropy alloys , 2019, Nature Reviews Materials.
[22] Y. F. Cheng,et al. Passivation behavior and surface chemistry of 2507 super duplex stainless steel in artificial seawater: Influence of dissolved oxygen and pH , 2019, Corrosion Science.
[23] S. Mukherjee,et al. Surface degradation mechanisms in a eutectic high entropy alloy at microstructural length-scales and correlation with phase-specific work function , 2019, npj Materials Degradation.
[24] L. X. Zhang,et al. A new CrFeNi2Al eutectic high entropy alloy system with excellent mechanical properties , 2019, Journal of Alloys and Compounds.
[25] Yong Liu,et al. Effect of roughness on general corrosion and pitting of (FeCoCrNi)0.89(WC)0.11 high-entropy alloy composite in 3.5 wt.% NaCl solution , 2019, Corrosion Science.
[26] Dierk Raabe,et al. Corrosion behavior of an equiatomic CoCrFeMnNi high-entropy alloy compared with 304 stainless steel in sulfuric acid solution , 2018 .
[27] L. X. Zhang,et al. A novel Fe20Co20Ni41Al19 eutectic high entropy alloy with excellent tensile properties , 2018 .
[28] M. Feuerbacher,et al. A single-phase bcc high-entropy alloy in the refractory Zr-Nb-Ti-V-Hf system , 2018, Scripta Materialia.
[29] N. Tsuji,et al. Simultaneous Strength-Ductility Enhancement of a Nano-Lamellar AlCoCrFeNi2.1 Eutectic High Entropy Alloy by Cryo-Rolling and Annealing , 2018, Scientific Reports.
[30] Hui Jiang,et al. A new strategy to design eutectic high-entropy alloys using mixing enthalpy , 2017 .
[31] B. Zhang,et al. Microstructural origins of high strength and high ductility in an AlCoCrFeNi2.1 eutectic high-entropy alloy , 2017 .
[32] Chengjun Liu,et al. Passivity of stainless steel in sulphuric acid under chemical oxidation , 2017 .
[33] M. Gibson,et al. Corrosion of high entropy alloys , 2017, npj Materials Degradation.
[34] D. Ponge,et al. Hydrogen effects on microstructural evolution and passive film characteristics of a duplex stainless steel , 2017 .
[35] Y. Qiang,et al. Experimental and theoretical studies of four allyl imidazolium-based ionic liquids as green inhibitors for copper corrosion in sulfuric acid , 2017 .
[36] Karin A. Dahmen,et al. Corrosion of Al xCoCrFeNi high-entropy alloys: Al-content and potential scan-rate dependent pitting behavior , 2017 .
[37] Xingpeng Guo,et al. Corrosion of polypyrrole: Kinetics of chemical and electrochemical processes in NaOH solutions , 2017 .
[38] C. Man,et al. Influence of temperature on the electrochemical and passivation behavior of 2507 super duplex stainless steel in simulated desulfurized flue gas condensates , 2017 .
[39] Sheng Guo,et al. Directly cast bulk eutectic and near-eutectic high entropy alloys with balanced strength and ductility in a wide temperature range , 2017 .
[40] Jiqiu Qi,et al. Effects of aluminum on microstructure and compressive properties of Al-Cr-Fe-Ni eutectic multi-component alloys , 2017 .
[41] D. Miracle,et al. A critical review of high entropy alloys and related concepts , 2016 .
[42] William A. Curtin,et al. Theory of strengthening in fcc high entropy alloys , 2016 .
[43] Tongmin Wang,et al. A multi-component AlCrFe2Ni2 alloy with excellent mechanical properties , 2016 .
[44] Sheng Guo,et al. Ultrafine-Grained AlCoCrFeNi2.1 Eutectic High-Entropy Alloy , 2016 .
[45] Qiang Wang,et al. Designing eutectic high entropy alloys of CoCrFeNiNbx , 2016 .
[46] L. Neelakantan,et al. Electrochemical and semiconducting properties of thin passive film formed on titanium in chloride medium at various pH conditions , 2016 .
[47] Huijun Kang,et al. A Promising New Class of High-Temperature Alloys: Eutectic High-Entropy Alloys , 2014, Scientific Reports.
[48] C. Dong,et al. Characterization of electrochemical and passive behaviour of Alloy 59 in acid solution , 2014 .
[49] J. Yeh,et al. High-Entropy Alloys: A Critical Review , 2014 .
[50] Yong Xiao,et al. Corrosion behavior of 5A05 aluminum alloy in NaCl solution , 2013, Acta Metallurgica Sinica (English Letters).
[51] R. M. Fernández-Domene,et al. Passive and transpassive behaviour of Alloy 31 in a heavy brine LiBr solution , 2013 .
[52] Jiajun Zhu,et al. Structure and properties of FeCoNiCrCu0.5Alx high-entropy alloy , 2013 .
[53] Seung‐Hwan Lee,et al. Effect of chromium on the corrosion behavior of low alloy steel in sulfuric acid , 2012, Metals and Materials International.
[54] Yancheng Zhang,et al. Development of localized corrosion damage on low pressure turbine disks and blades: I. Passivity , 2012 .
[55] M. Xue,et al. Corrosion behavior of superhydrophobic surfaces of Ti alloys in NaCl solutions , 2012 .
[56] A. Alfantazi,et al. EIS study of potentiostatically formed passive film on 304 stainless steel , 2011 .
[57] D. Miracle,et al. Mechanical properties of Nb25Mo25Ta25W25 and V20Nb20Mo20Ta20W20 refractory high entropy alloys , 2011 .
[58] M. Jenko,et al. The corrosion behaviour of austenitic and duplex stainless steels in artificial saliva with the addition of fluoride , 2011 .
[59] A. Azimi,et al. Corrosion inhibition of 302 stainless steel with schiff base compounds , 2010 .
[60] Vincent Vivier,et al. Constant-Phase-Element Behavior Caused by Resistivity Distributions in Films I. Theory , 2010 .
[61] C. Dong,et al. Passivity of 316L stainless steel in borate buffer solution studied by Mott-Schottky analysis, atomic absorption spectrometry and X-ray photoelectron spectroscopy , 2010 .
[62] J. Yeh,et al. The effect of molybdenum on the corrosion behaviour of the high-entropy alloys Co1.5CrFeNi1.5Ti0.5Mox in aqueous environments , 2010 .
[63] Swe-Kai Chen,et al. Electrochemical passive properties of AlxCoCrFeNi (x = 0, 0.25, 0.50, 1.00) alloys in sulfuric acids , 2010 .
[64] M. Golozar,et al. The passivity of AISI 316L stainless steel in 0.05 M H2SO4 , 2010 .
[65] R. Rebak,et al. Passivation and Depassivation of Alloy 22 in Acidic Chloride Solutions , 2010 .
[66] M. Golozar,et al. Effect of solution concentration on semiconducting properties of passive films formed on austenitic stainless steels , 2010 .
[67] W. Ke,et al. Electrochemical behaviour of high nitrogen stainless steel in acidic solutions , 2009 .
[68] H. Ashassi-Sorkhabi,et al. EN, EIS and polarization studies to evaluate the inhibition effect of 3H-phenothiazin-3-one, 7-dimethylamin on mild steel corrosion in 1 M HCl solution , 2008 .
[69] M. Morad,et al. A comparative study on the corrosion behaviour of 304 austenitic stainless steel in sulfamic and sulfuric acid solutions , 2008 .
[70] J. Yeh,et al. Effect of the aluminium content of AlxCrFe1.5MnNi0.5 high-entropy alloys on the corrosion behaviour in aqueous environments , 2008 .
[71] B. Malki,et al. Effect of the final annealing of cold rolled stainless steels sheets on the electronic properties and pit nucleation resistance of passive films , 2008 .
[72] Jingwen Zhao,et al. Electrochemical corrosion performance in 3.5% NaCl of the electrodeposited nanocrystalline Ni films with and without dispersions of Cr nanoparticles , 2006 .
[73] Y. Hsu,et al. Corrosion behavior of FeCoNiCrCux high-entropy alloys in 3.5% sodium chloride solution , 2005 .
[74] M. Montemor,et al. Capacitance behaviour of passive films on ferritic and austenitic stainless steel , 2005 .
[75] B. Cantor,et al. Microstructural development in equiatomic multicomponent alloys , 2004 .
[76] T. Shun,et al. Nanostructured High‐Entropy Alloys with Multiple Principal Elements: Novel Alloy Design Concepts and Outcomes , 2004 .
[77] P. De,et al. Corrosion behaviour of amorphous Ti48Cu52, Ti50Cu50 and Ti60Ni40 alloys investigated by potentiodynamic polarization method , 2003 .
[78] D. Landolt,et al. Passive films on stainless steels—chemistry, structure and growth , 2003 .
[79] Y. F. Cheng,et al. Determination of the diffusivity of point defects in passive films on carbon steel , 2002 .
[80] H. Man,et al. Synergistic effect of cavitation erosion and corrosion of various engineering alloys in 3.5% NaCl solution , 2000 .
[81] J. Pan,et al. EIS and XPS study of surface modification of 316LVM stainless steel after passivation. , 1998 .
[82] D. Thierry,et al. Corrosion resistance for biomaterial applications of TiO2 films deposited on titanium and stainless steel by ion-beam-assisted sputtering. , 1997, Journal of biomedical materials research.
[83] D. Macdonald,et al. A new method for estimating the diffusivities of vacancies in passive films , 1996 .
[84] R. Kirchheim,et al. Dissolution rates of iron and chromium and FeCralloys in the passive state , 1990 .
[85] U. Stimming,et al. The electronic properties of disordered passive films , 1989 .