Synergistic Effect of Tung Oil and Heat Treatment on Surface Characteristics and Dimensional Stability of Wood

[1]  Song-lin Yi,et al.  Effect of natural tung oil on wood shrinkage during the thermal modification process , 2022, Journal of Cleaner Production.

[2]  Nam-Hun Kim,et al.  Comparison of physical and mechanical properties of Paulownia tomentosa and Pinus koraiensis wood heat-treated in oil and air , 2022, European Journal of Wood and Wood Products.

[3]  Jingyu Xi,et al.  Effects of the combination of compression and impregnation with phenolic resin on the dimensional stability in the multiscale wood structure of Chinese fir , 2022, Construction and Building Materials.

[4]  M. Heitzmann,et al.  Long-span timber flooring systems: A systematic review from structural performance and design considerations to constructability and sustainability aspects , 2022, Journal of Building Engineering.

[5]  Z. Lou,et al.  Regulating lignin content to obtain excellent bamboo-derived electromagnetic wave absorber with thermal stability , 2021, Chemical Engineering Journal.

[6]  Jinzhen Cao,et al.  Improvement of wood against UV weathering and decay by using plant origin substances: Tannin acid and tung oil , 2021 .

[7]  Changhua Fang,et al.  Effects of rosin treatment on hygroscopicity, dimensional stability, and pore structure of round bamboo culm , 2021 .

[8]  Xiaorong Liu,et al.  Bamboo flattening technique: a literature and patent review , 2021, European Journal of Wood and Wood Products.

[9]  R. Oladi,et al.  Physicochemical Properties of Thermally Treated Poplar Wood in Silicone and Rapeseed Oils: A Comparative Study , 2021 .

[10]  C. Hill,et al.  Thermal modification of wood—a review: chemical changes and hygroscopicity , 2021, Journal of Materials Science.

[11]  A. Abdalla,et al.  Suitability of some Acacia Species Grown in Sudan for Paper Making , 2021 .

[12]  Yingying Feng,et al.  Preparation of Tung Oil‐Loaded PU/PANI Microcapsules and Synergetic Anti‐Corrosion Properties of Self‐Healing Epoxy Coatings , 2020 .

[13]  W. Gindl-Altmutter,et al.  On the drying behavior of natural oils used for solid wood finishing , 2020, Progress in Organic Coatings.

[14]  J. Freiherr,et al.  Out of the woods: psychophysiological investigations on wood odors to estimate their suitability as ambient scents , 2020 .

[15]  A. Sari,et al.  Phase change material impregnated wood for passive thermal management of timber buildings , 2020, International Journal of Energy Research.

[16]  S. Shi,et al.  Environmentally Benign Wood Modifications: A Review , 2020 .

[17]  C. Popescu,et al.  Determination of the effectiveness of a combined thermal/chemical wood modification by the use of FT–IR spectroscopy and chemometric methods , 2020, Journal of Molecular Structure.

[18]  Xin Gao,et al.  Changes of water related properties in radiata pine wood due to heat treatment , 2019 .

[19]  E. Jang,et al.  Changes in gas permeability and pore structure of wood under heat treating temperature conditions , 2019, Journal of Wood Science.

[20]  F. Hoseinzadeh,et al.  Creep behavior of heat treated beech wood and the relation to its chemical structure , 2019, Construction and Building Materials.

[21]  N. Yan,et al.  Effects of Tung oil treatment on wood hygroscopicity, dimensional stability and thermostability , 2019, Industrial Crops and Products.

[22]  B. Zhang,et al.  Synergistic effects of tung oil and heat treatment on physicochemical properties of bamboo materials , 2019, Scientific Reports.

[23]  K. Chin,et al.  Thermal treatment of wood using vegetable oils: A review , 2018, Construction and Building Materials.

[24]  Han Yang,et al.  Study on the UV curing behavior of tung oil: Mechanism, curing activity and film-forming property , 2018 .

[25]  Yanji Zhu,et al.  Fabrication of microcapsules containing dual-functional tung oil and properties suitable for self-healing and self-lubricating coatings , 2018 .

[26]  D. Kocaefe,et al.  Combined effect of acetylation and heat treatment on the physical, mechanical and biological behavior of jack pine (Pinus banksiana) wood , 2018, European Journal of Wood and Wood Products.

[27]  Lijuan Ping,et al.  Pore analysis of thermally compressed Scots pine (Pinus sylvestris L.) by mercury intrusion porosimetry , 2017 .

[28]  I. Serša,et al.  Distribution and penetration of tung oil in wood studied by magnetic resonance microscopy , 2017 .

[29]  Li Yu,et al.  The wood from the trees: The use of timber in construction , 2017 .

[30]  Wenji Yu,et al.  Surface chemical composition analysis of heat-treated bamboo , 2016 .

[31]  M. I. Aranguren,et al.  Polymeric networks based on tung oil: Reaction and modification with green oil monomers , 2015 .

[32]  Jinzhen Cao,et al.  Characterization of surface chemistry and crystallization behavior of polypropylene composites reinforced with wood flour, cellulose, and lignin during accelerated weathering , 2015 .

[33]  V. Mechtcherine,et al.  Investigations of the pore-size distribution of wood in the dry and wet state by means of mercury intrusion porosimetry , 2014, Wood Science and Technology.

[34]  M. Humar,et al.  Efficacy of linseed- and tung-oil-treated wood against wood-decay fungi and water uptake , 2013 .

[35]  P. Hall,et al.  Chemical and cellulose crystallite changes in Pinus radiata during torrefaction , 2013 .

[36]  D. Kocaefe,et al.  Quantitative characterization of chemical degradation of heat‐treated wood surfaces during artificial weathering using XPS , 2013 .

[37]  S. Korkut.  Performance of three thermally treated tropical wood species commonly used in Turkey , 2012 .

[38]  P. Gallezot,et al.  Conversion of biomass to selected chemical products. , 2012, Chemical Society reviews.

[39]  Moon-Jae Park,et al.  Analysis of Factors Affecting the Hygroscopic Performance of Thermally Treated Pinus koraiensis Wood , 2012 .

[40]  Ali Ashrafi,et al.  Tung oil: An autonomous repairing agent for self-healing epoxy coatings , 2011 .

[41]  M. Nimlos,et al.  Application of an Fourier Transform-Infrared Imaging Tool for Measuring Temperature or Reaction Profiles in Pyrolyzed Wood , 2011 .

[42]  Michael Plötze,et al.  Porosity and pore size distribution of different wood types as determined by mercury intrusion porosimetry , 2011, European Journal of Wood and Wood Products.

[43]  S. Pang,et al.  Effect of oil heating age on colour and dimensional stability of heat treated Pinus radiata , 2011, European Journal of Wood and Wood Products.

[44]  C. Hill,et al.  Analysis of the water vapour sorption isotherms of thermally modified acacia and sesendok , 2010 .

[45]  S. Poncsák,et al.  Effect of heat treatment on the wettability of white ash and soft maple by water , 2008, Holz als Roh- und Werkstoff.

[46]  W. Sandermann,et al.  Chemische Untersuchungen über die thermische Zersetzung von Holz—Dritte Mitteilung: Chemische Untersuchung des Zersetzungsablaufs , 1964, Holz als Roh- und Werkstoff.

[47]  Yukie Saito,et al.  Effects of heat treatment on brittleness of Styrax tonkinensis wood , 2007, Journal of Wood Science.

[48]  E. Gümüşkaya,et al.  Crystalline structure of heat-treated Scots pine [Pinus sylvestris L.] and Uludağ fir [Abies nordmanniana (Stev.) subsp. bornmuelleriana (Mattf.)] wood , 2007, Wood Science and Technology.

[49]  M. Pétrissans,et al.  XPS characterization of wood chemical composition after heat‐treatment , 2006 .

[50]  M. Boonstra,et al.  Chemical analysis of heat treated softwoods , 2006, Holz als Roh- und Werkstoff.

[51]  P. Cooper,et al.  Effect of oil type, temperature and time on moisture properties of hot oil-treated wood , 2005, Holz als Roh- und Werkstoff.

[52]  M. Hakkou,et al.  Wettability changes and mass loss during heat treatment of wood , 2005 .

[53]  A. Rapp,et al.  Differently modified wood: comparison of some selected properties , 2004 .

[54]  S. Kaliaguine,et al.  Surface analysis of explosion pulps by ESCA , 1993, Wood Science and Technology.

[55]  L. Podgorski,et al.  Surface modification of wood by plasma polymerisation , 2002 .

[56]  Shigeyasu Amada,et al.  Fiber texture and mechanical graded structure of bamboo , 1997 .

[57]  S. Kaliaguine,et al.  ESCA study of the solid residues of supercritical extraction of Populus tremuloïdes in methanol , 1987 .

[58]  E. W. Washburn.  Note on a Method of Determining the Distribution of Pore Sizes in a Porous Material. , 1921, Proceedings of the National Academy of Sciences of the United States of America.