Performance Impact of Manufacturing Variations for Multistage Steam Turbines

[1]  Feng Liu,et al.  A Strongly Coupled Time-Marching Method for Solving the Navier—Stokes andk-ω Turbulence Model Equations with Multigrid , 1996 .

[2]  Siva Nadarajah,et al.  Constrained Adjoint-Based Aerodynamic Shape Optimization of a Single-Stage Transonic Compressor , 2013 .

[3]  Feng Liu,et al.  Turbine Blade Row Optimization Through Endwall Contouring by an Adjoint Method , 2015 .

[4]  M. Giles,et al.  Predictions of Three-Dimensional Steady and Unsteady Inviscid Transonic Stator/Rotor Interaction With Inlet Radial Temperature Nonuniformity , 1994 .

[5]  Rodrick V. Chima.  Calculation of Multistage Turbomachinery Using Steady Characteristic Boundary Conditions , 1998 .

[6]  Christian Frey,et al.  Compressor Leading Edge Sensitivities and Analysis With an Adjoint Flow Solver , 2013 .

[7]  Gabriel Banks,et al.  Gradient-Based Adjoint and Design of Experiment CFD Methodologies to Improve the Manufacturability of High Pressure Turbine Blades , 2016 .

[8]  D. X. Wang,et al.  Adjoint Aerodynamic Design Optimization for Blades in Multistage Turbomachines—Part I: Methodology and Verification , 2010 .

[9]  F. Menter.  Two-equation eddy-viscosity turbulence models for engineering applications , 1994 .

[10]  J. D. Denton,et al.  The Calculation of Three-Dimensional Viscous Flow Through Multistage Turbomachines , 1992 .

[11]  Antony Jameson,et al.  Multigrid Navier-Stokes Calculations for Three-Dimensional Cascades , 1993 .

[12]  David L. Darmofal,et al.  Impact of Geometric Variability on Axial Compressor Performance , 2003 .

[13]  Feng Liu,et al.  Staggered upwind method for solving Navier-Stokes and k-omega turbulence model equations , 1995 .

[14]  Sriram Shankaran,et al.  Assessing Turbomachinery Performance Sensitivity to Boundary Conditions Using Control Theory , 2014 .

[15]  Ivan McBean,et al.  THREE-DIMENSIONAL AERODYNAMIC DESIGN OPTIMIZATION OF A TURBINE BLADE BY USING AN ADJOINT METHOD , 2009 .

[16]  Ronald Scott Bunker,et al.  The Effects of Manufacturing Tolerances on Gas Turbine Cooling , 2009 .

[17]  Martin N. Goodhand,et al.  The Impact of Real Geometries on Three-Dimensional Separations in Compressors , 2010 .

[18]  Feng Liu,et al.  Multi-Objective Optimization of a Transonic Compressor Rotor by Using an Adjoint Method , 2015 .

[19]  K. Bammert,et al.  Influences of Manufacturing Tolerances and Surface Roughness of Blades on the Performance of Turbines , 1976 .

[20]  Antony Jameson,et al.  Aerodynamic design via control theory , 1988, J. Sci. Comput..