Enhanced sintering ability of biphasic calcium phosphate by polymers used for bone scaffold fabrication.

[1]  C. Kailasanathan,et al.  Comparative study of hydroxyapatite/gelatin composites reinforced with bio-inert ceramic particles , 2012 .

[2]  L. Deng,et al.  Influence of Adding β-SiС on the Performance of α-SiС Pressureless Sintering Ceramics , 2012 .

[3]  B. Kieback,et al.  Highly heat conductive open‐porous aluminium fibre based parts for advanced heat transfer applications , 2012 .

[4]  K. Edalati,et al.  Plastic deformation and allotropic phase transformations in zirconia ceramics during high-pressure torsion , 2011 .

[5]  Shuping Peng,et al.  Structure and properties of nano-hydroxypatite scaffolds for bone tissue engineering with a selective laser sintering system , 2011, Nanotechnology.

[6]  F. Oktar,et al.  Sintering behavior and properties of reinforced hydroxyapatite/TCP biphasic bioceramics with ZnO-whiskers , 2011 .

[7]  Hsueh-Chuan Hsu,et al.  Microstructure and mechanical properties of dental 3Y-TZP ceramics by using CaO–P2O5 glass as additive , 2011 .

[8]  Hsueh-Chuan Hsu,et al.  Preparation and characterization of four different compositions of calcium phosphate scaffolds for bone tissue engineering , 2011 .

[9]  A. Bandyopadhyay,et al.  Effect of electrical polarization and composition of biphasic calcium phosphates on early stage osteoblast interactions. , 2011, Journal of biomedical materials research. Part B, Applied biomaterials.

[10]  Bin Duan,et al.  Customized Ca–P/PHBV nanocomposite scaffolds for bone tissue engineering: design, fabrication, surface modification and sustained release of growth factor , 2010, Journal of The Royal Society Interface.

[11]  Shuping Peng,et al.  Structural design and experimental analysis of a selective laser sintering system with nano-hydroxyapatite powder. , 2010, Journal of biomedical nanotechnology.

[12]  N. Selvamurugan,et al.  Synthesis and characterization of nanoscale-hydroxyapatite-copper for antimicrobial activity towards bone tissue engineering applications. , 2010, Journal of biomedical nanotechnology.

[13]  Thorsten Pretsch.  Review on the Functional Determinants and Durability of Shape Memory Polymers , 2010 .

[14]  Y. J. Wu,et al.  Densification and microstructures of PbTiO3 ceramics prepared by spark plasma sintering , 2010 .

[15]  Shaun Eshraghi,et al.  Mechanical and microstructural properties of polycaprolactone scaffolds with one-dimensional, two-dimensional, and three-dimensional orthogonally oriented porous architectures produced by selective laser sintering. , 2010, Acta biomaterialia.

[16]  Sergey V. Dorozhkin,et al.  Bioceramics of calcium orthophosphates. , 2010, Biomaterials.

[17]  I. Zalite,et al.  Microwave sintering of fine grained HAP and HAP/TCP bioceramics , 2010 .

[18]  T. Arinzeh,et al.  Biphasic Calcium Phosphate Ceramics for Bone Regeneration and Tissue Engineering Applications , 2010, Materials.

[19]  Vikash Porwal,et al.  Vibrational dynamics and heat capacity in poly(L‐lactic acid) , 2010 .

[20]  F. Raether,et al.  Phase formation during liquid phase sintering of ZnO ceramics , 2009 .

[21]  Y. Shibata,et al.  Effect of Varying HAP/TCP Ratios in Tape-cast Biphasic Calcium Phosphate Ceramics on Response In Vitro , 2009 .

[22]  A. Siddharthan,et al.  Synthesis and characterization of nanocrystalline apatites from eggshells at different Ca/P ratios , 2009, Biomedical materials.

[23]  S. Sharma,et al.  Evaluation of hydroxyapatite and beta-tricalcium phosphate mixed with bone marrow aspirate as a bone graft substitute for posterolateral spinal fusion , 2009, Indian journal of orthopaedics.

[24]  K. Chapman,et al.  Benefits of low kenaf loading in biobased composites of poly(L‐lactide) and kenaf fiber , 2009 .

[25]  Qin Zou,et al.  Degradation and biocompatibility of porous nano-hydroxyapatite/polyurethane composite scaffold for bone tissue engineering , 2009 .

[26]  Dichen Li,et al.  Fabrication of bioceramic scaffolds with pre-designed internal architecture by gel casting and indirect stereolithography techniques , 2008 .

[27]  J. M. Gavira-Vallejo,et al.  Micro-Raman spectroscopic investigation of external wall paintings from St. Dumitru’s Church, Suceava, Romania , 2008, Analytical and bioanalytical chemistry.

[28]  M. Avena,et al.  An ATR-FTIR study of different phosphonic acids in aqueous solution. , 2008, Spectrochimica acta. Part A, Molecular and biomolecular spectroscopy.

[29]  Min Wang,et al.  Selective laser sintering of porous tissue engineering scaffolds from poly(l-lactide)/carbonated hydroxyapatite nanocomposite microspheres , 2008, Journal of materials science. Materials in medicine.

[30]  Oana Bretcanu,et al.  Polymer-bioceramic composites for tissue engineering scaffolds , 2008 .

[31]  Kyoung-Nam Kim,et al.  Effect of Calcium Phosphate Glass on Proliferation and Differentiation of MG-63 Cells in HA Scaffolds , 2007 .

[32]  A. Molinari,et al.  Liquid Phase Sintering of a Boron Alloyed Austenitic Stainless Steel , 2007 .

[33]  R. Harris,et al.  Layer Manufacturing for in Vivo Devices , 2006, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

[34]  D. Kaplan,et al.  Porosity of 3D biomaterial scaffolds and osteogenesis. , 2005, Biomaterials.

[35]  G. Daculsi,et al.  A comparative study of biphasic calcium phosphate ceramics for human mesenchymal stem-cell-induced bone formation. , 2005, Biomaterials.

[36]  Naoto Endo,et al.  Comparison of hydroxyapatite and beta tricalcium phosphate as bone substitutes after excision of bone tumors. , 2005, Journal of biomedical materials research. Part B, Applied biomaterials.

[37]  Margam Chandrasekaran,et al.  Rapid prototyping in tissue engineering: challenges and potential. , 2004, Trends in biotechnology.

[38]  C K Chua,et al.  Development of tissue scaffolds using selective laser sintering of polyvinyl alcohol/hydroxyapatite biocomposite for craniofacial and joint defects , 2004, Journal of materials science. Materials in medicine.

[39]  Miqin Zhang,et al.  Biphasic calcium phosphate nanocomposite porous scaffolds for load-bearing bone tissue engineering. , 2004, Biomaterials.

[40]  E. Olevsky,et al.  Effective diffusion coefficients in solid-state sintering , 2004 .

[41]  R. Manzo,et al.  Drug release from carbomer:carbomer sodium salt matrices with potential use as mucoadhesive drug delivery system. , 2004, International journal of pharmaceutics.

[42]  Horst Kessler,et al.  RGD modified polymers: biomaterials for stimulated cell adhesion and beyond. , 2003, Biomaterials.

[43]  K. Leong,et al.  Scaffold development using selective laser sintering of polyetheretherketone-hydroxyapatite biocomposite blends. , 2003, Biomaterials.

[44]  Seong‐Hyeon Hong,et al.  Synthesis and dissolution behavior of β-TCP and HA/β-TCP composite powders , 2003 .

[45]  S. Kadiyala,et al.  Mesenchymal stem cells combined with biphasic calcium phosphate ceramics promote bone regeneration , 2003, Journal of materials science. Materials in medicine.

[46]  I. Zein,et al.  Fused deposition modeling of novel scaffold architectures for tissue engineering applications. , 2002, Biomaterials.

[47]  Sung Soo Chung,et al.  An improvement in sintering property of beta-tricalcium phosphate by addition of calcium pyrophosphate. , 2002, Biomaterials.

[48]  M. Malinconico,et al.  Preparation and characterisation of composites based on biodegradable polymers for “in vivo” application , 2000 .

[49]  E. White.  Biomaterials innovation: it’s a long road to the operating room , 1997 .

[50]  C. Mangano,et al.  Clinical and histologic aspects of biphasic calcium phosphate ceramic (BCP) used in connection with implant placement. , 1996, Biomaterials.

[51]  J. M. Christie,et al.  General chemical etchants for microstructures and defects in silicates , 1985 .

[52]  A. Leriche,et al.  Processing and properties of transparent hydroxyapatite and β tricalcium phosphate obtained by HIP process , 2013 .

[53]  A. DateAbhijit,et al.  新しい安定剤としての両親媒性脂質Gelucire 50/13を含む脂質ナノキャリア(GeluPearl): 製造及び特性測定と経口薬物送達のための評価 , 2011 .

[54]  F. E. Wiria,et al.  Poly-ε-caprolactone/hydroxyapatite for tissue engineering scaffold fabrication via selective laser sintering , 2007 .

[55]  R. German.  Rheological Model for Viscous Flow Densification During Supersolidus Liquid Phase Sintering , 2006 .

[56]  M. Herrmann,et al.  Densification of liquid phase sintered silicon carbide , 2006 .