Power devices loading in multilevel converters for 10 MW wind turbines

Several promising multilevel converter solutions for 10 MW wind turbines using permanent magnet synchronous generators are proposed, designed and compared both with one-stage gear-box drive and direct drive systems. The current and loss distributions, as well as the utilization of power devices in each converter are analyzed based on simulation results. Finally, the total loss and efficiency comparison are given. It is concluded that five-level and three-level H-bridge topologies show higher efficiency either in the power conversion or in the device utilization compared to the three-level Neutral-Point-Clamped topology with both the direct-drive and one-stage gear box drive systems.

[1]  R. Teodorescu,et al.  Overview of recent grid codes for wind power integration , 2010, 2010 12th International Conference on Optimization of Electrical and Electronic Equipment.

[2]  José R. Rodríguez,et al.  A Survey on Neutral-Point-Clamped Inverters , 2010, IEEE Transactions on Industrial Electronics.

[3]  Steffen Bernet,et al.  The active NPC converter and its loss-balancing control , 2005, IEEE Transactions on Industrial Electronics.

[4]  Bin Wu,et al.  Recent Advances and Industrial Applications of Multilevel Converters , 2010, IEEE Transactions on Industrial Electronics.

[5]  Mariusz Malinowski,et al.  Comparison of 2.3-kV Medium-Voltage Multilevel Converters for Industrial Medium-Voltage Drives , 2007, IEEE Transactions on Industrial Electronics.

[6]  F. Blaabjerg,et al.  Power electronics as efficient interface in dispersed power generation systems , 2004, IEEE Transactions on Power Electronics.

[7]  Joachim Holtz,et al.  Optimal Control of a Dual Three-Level Inverter System for Medium-Voltage Drives , 2010 .

[8]  Pedro Rodriguez,et al.  Medium voltage three-level converters for the grid connection of a multi-MW wind turbine , 2009, 2009 13th European Conference on Power Electronics and Applications.

[9]  H. Polinder,et al.  Comparison of direct-drive and geared generator concepts for wind turbines , 2005, IEEE International Conference on Electric Machines and Drives, 2005..

[10]  P. Steimer,et al.  A 16 MVA ANPC-PEBB with 6 kA IGCTs , 2005, Fourtieth IAS Annual Meeting. Conference Record of the 2005 Industry Applications Conference, 2005..

[11]  Zhe Chen,et al.  A Review of the State of the Art of Power Electronics for Wind Turbines , 2009, IEEE Transactions on Power Electronics.

[12]  Frede Blaabjerg,et al.  Power losses in PWM-VSI inverter using NPT or PT IGBT devices , 1994 .

[13]  H. Polinder,et al.  Optimization of Multibrid Permanent-Magnet Wind Generator Systems , 2009, IEEE Transactions on Energy Conversion.

[14]  Hiromi Hosoda,et al.  Multi-level converters for large capacity motor drive , 2010, The 2010 International Power Electronics Conference - ECCE ASIA -.