A mathematical technique for hybrid power system design with energy loss considerations

Abstract This paper presents a generic mathematical optimisation model for the design of hybrid power systems (HPSs). The model takes into account power losses during the allocation of power generated from renewables to appliance loads, and is formulated as a linear programme (LP) based on a superstructure including all possible power allocation options in a typical HPS. With given power source and demand data for an HPS, the minimum outsourced electricity supply and the minimum electricity storage capacity required can be determined through a two-step optimisation. Three literature case studies are solved to illustrate the proposed approach.

[1]  Mohammad Yusri Hassan,et al.  Process Integration techniques for optimal design of hybrid power systems , 2013 .

[2]  M. El‐Halwagi.  Pollution prevention through process integration : systematic design tools , 1997 .

[3]  Gilles Notton,et al.  Hybrid Photovoltaic/Wind Energy Systems For Remote Locations , 2011 .

[4]  Djamila Diaf,et al.  A methodology for optimal sizing of autonomous hybrid PV/wind system , 2007 .

[5]  Mohammad Yusri Hassan,et al.  Process integration of hybrid power systems with energy losses considerations , 2013 .

[6]  Fatih Onur Hocaoglu,et al.  A novel hybrid (wind-photovoltaic) system sizing procedure , 2009 .

[7]  K. Chatterjee,et al.  Design of isolated renewable hybrid power systems , 2010 .

[8]  Jacques F. Gouws,et al.  Water Minimization Techniques for Batch Processes , 2010 .

[9]  Cheng-Liang Chen,et al.  Transshipment model-based MILP (mixed-integer linear programming) formulation for targeting and design of hybrid power systems , 2014 .

[10]  Carlos J. Renedo,et al.  A review: Energy recovery in batch processes , 2012 .

[11]  Zhou Wei,et al.  Optimal design and techno-economic analysis of a hybrid solar–wind power generation system , 2009 .

[12]  Cheng-Liang Chen,et al.  A Process Integration Technique for Targeting and Design of Off-grid Hybrid Power Networks , 2013 .

[13]  Prabodh Bajpai,et al.  Hybrid renewable energy systems for power generation in stand-alone applications: A review , 2012 .

[14]  Jiří Jaromír Klemeš,et al.  A process integration targeting method for hybrid power systems , 2012 .

[15]  Ran Dai,et al.  Optimal power generation and load management for off-grid hybrid power systems with renewable sources via mixed-integer programming , 2013 .

[16]  Dominic C.Y. Foo.  Automated Targeting Technique for Batch Process Integration , 2010 .

[17]  Rachid Ibtiouen,et al.  Techno-economic valuation and optimization of integrated photovoltaic/wind energy conversion system , 2011 .

[18]  Santanu Bandyopadhyay,et al.  Design and optimization of isolated energy systems through pinch analysis , 2011 .

[19]  Mimi Haryani Hassim,et al.  Design of distributed energy system through Electric System Cascade Analysis (ESCA) , 2012 .

[20]  Sandip Deshmukh,et al.  Modeling of hybrid renewable energy systems , 2008 .

[21]  Ali Naci Celik,et al.  Techno-economic analysis of autonomous PV-wind hybrid energy systems using different sizing methods , 2003 .

[22]  Wei Zhou,et al.  Current status of research on optimum sizing of stand-alone hybrid solar–wind power generation systems , 2010 .

[23]  Ali Naci Celik,et al.  Optimisation and techno-economic analysis of autonomous photovoltaic–wind hybrid energy systems in comparison to single photovoltaic and wind systems , 2002 .

[24]  Rajesh Kumar Nema,et al.  A current and future state of art development of hybrid energy system using wind and PV-solar: A review , 2009 .

[25]  B. J. Brinkworth,et al.  Sizing and techno-economical optimization for hybrid solar photovoltaic/wind power systems with battery storage , 1997 .

[26]  Wei Zhou,et al.  A novel optimization sizing model for hybrid solar-wind power generation system , 2007 .

[27]  Bin Ai,et al.  Computer-aided design of PV/wind hybrid system , 2003 .

[28]  Jiří Jaromír Klemeš,et al.  Methodology for maximising the use of renewables with variable availability , 2012 .

[29]  Richard E. Rosenthal,et al.  GAMS -- A User's Guide , 2004 .

[30]  Rashid Ansumana,et al.  Evaluating the impact of adding energy storage on the performance of a hybrid power system , 2011 .

[31]  A. Rajendra Prasad,et al.  Optimization of integrated photovoltaic–wind power generation systems with battery storage , 2006 .

[32]  Ioannis P. Panapakidis,et al.  Comparative analysis of different grid-independent hybrid power generation systems for a residential load , 2012 .